LOEWE Connect 37 Full-HD+ 100 Benutzerhandbuch

49 -

Operating additional equipment

You can connect a PC to the PC IN socket for example and thus use the 
TV screen as a monitor.

➠  When connecting a PC or accessory equipment to the PC IN socket 

of the TV set, set one of the following screen resolutions on the PC / 
accessory equipment first.

(SVGA)

(XGA)

(SXGA)

(WXGA)

(SDTV)

(SDTV)

(SDTV)

(SDTV)

(HDTV)

(HDTV)

➠  There is no need to register the device with the connec-

tion wizard.

Switch off all equipment before connecting.

Connect the device to the TV set’s PC IN socket with a VGA 
cable.

Connect the analogue audio signal of the PC to the AUDIO 
IN2 jack on the TV set with a stereo cable.

Alternatively, connect the digital audio output of the PC or 
accessory equipment to the AUDIO DIGITAL IN socket of 
the TV set with a cinch cable.

The digital audio input can be assigned to the PC IN socket 
by  TV menu    Connections    Miscellaneous    Assign 
digital audio input, see page 53.

Call AV selection.

Select PC IN socket,
  OK switch over.

This can be used to position the picture correctly and move the position of 
the picture (horizontally and vertically) so that it fills out the whole screen. 

Call TV menu.

 Select  Geometry,
 

go to the menu line below.

 

Select the desired setting,
 

  go to the menu line below.

 

Make settings.

Call TV menu.

 Select  Picture,
 

go to the menu line below.

Select and set Colour standard:
    RGB or
    Ycc / Ypp

The colours will not be shown correctly if the wrong 
standard is set.

Connection 

example of a 

PC

DIG-OUT

MIC

IN

OUT

TV set

PC

PC IN

AUDIO IN2

OK

OK

END

Switch to ...

COMP. IN
HDMI2/DVI
HDMI1/DVI
PC IN
AVS
DVD-REC
AV1
VIDEO

AV selection