Samsung L331 SPL331WEX Benutzerhandbuch

Using

3-6

The Web Browser lets you monitor and control one projector from a PC without installing any software. Before you 
can use the Web Browser, you must connect your projector to your local area network. For directions explaining how 
to connect to a network,

 see section

 

2-20, Connecting to a Network

. 

To control multiple projectors from a single PC, install and run 

Samsung Projector Manager. 

For information about Samsung Projector Manager, go to 3-6-2

. 

 Check the network connection between the PC and projector before connecting the Web Browser. If the network 
connection (see section 2-20, Connecting to a Network) has failed, the Web browser window may not be available for use.

 

•

To use the Web Browser, your PC must meet the following minimum system requirement :
•

<RAM>: More than 10MB

•

<Hard Disk> capacity: More than 10MB

•

Display resolution: More than 640 x 480

•

Supported OS : Microsoft Windows XP, Windows Vista

•

Web browser : Microsoft Internet Explorer 6 or later version, Netscape Navigator 9 or later version, Mozilla FireFox 3.0.x or later 
version, Google Chrome.

1. Connecting

•

 Enter the projector's IP address into the web browser address bar.

You can see the projector's IP address by pressing the Menu button and selecting Setup>Network>IP Setting.

 

•

 The Network Projector window appears. For information about control items in the Network Projector window, refer to the 
items under Section 3-5, Using the Screen Adjustment Menu.

•

Some functions listed in 'Using the Screen Adjustment Menu' cannot be used in the web browser because of limitations in 
remote control by the network.