2WIRE F-116P Benutzerhandbuch

Seite von 150
Alignment and Troubleshooting
4-23
4.1.10 Error Message
Messages appear on the control panel display to indicate the machine’s status or errors. Refer to the tables 
below to understand the messages’ and their meaning, and correct the problem as is necessary.
Checking display messages
• If a message is not in the table, reboot the power and try the printing job again.
• Some messages may not appear in the display depending on the options or models.
• [error number] indicates the error number.
• [tray type] indicates the tray number.
• [media type] indicates the media type.
• [media size] indicates the media size.
• [color] indicates the color of toner or imaging unit.
LCD Display
Descriptions
Solutions
Document Jam
When Document Jam occurred at 
ADF module, this is displayed on 
LCD.
Clear the JAM.
[Door Open]
The front cover is not securely
latched.
Close the front door.
[ No Paper ]  
Add Paper
When there is no paper in CASSETTE 
Tray, machine displays this message 
on LCD.
Load paper in the paper tray.
[Paper Jam 0] 
Open/Close Door
When the machine encountered paper 
jam in pick-up area, Machine displays 
on the LCD.
Clear the JAM. (Refer to JAM removal)
[Paper Jam 1] 
Open/Close Door
When the machine encountered paper 
jam in paper exit of Machine, machine 
displays on LCD.
Clear the JAM. (Refer to JAM removal)
[Paper Jam 2] 
Check Inside
When the machine encountered paper 
jam in paper exit of Machine, machine 
displays on the LCD.
Clear the JAM. (Refer to JAM removal)
[COMM. Error]
When the machine has problem in 
communication, it displayed on the 
LCD.  
Machine displays this in case of 
Transmission. 
Machine displays this in case of  fax 
handshaking step of  Reception.
Ask the sender to try again.
[Line Error]
When the machine has problem in 
case of  Fax  Data  reception step.
Try again. If the problem persists, wait 
an hour or so for the line to clear and 
try again. 
Or, turn the ECM on.