Sony PDW-1500 Benutzerhandbuch
Ch
apt
apt
er 8
Men
u
s
93
8-3 Extended Menu
131
AUDIO VOLUME
Select whether each of the ALL/CH-1, CH-2 to CH-4 adjustment knobs
on the control panel is effective to control the audio recording level and
playback level on each channel or the ALL/CH-1 adjustment knob alone
functions as a master control to control the audio level on all channels
together.
each: Each of the ALL/CH-1, CH-2 to CH-4 adjustment knobs is effective
on the control panel is effective to control the audio recording level and
playback level on each channel or the ALL/CH-1 adjustment knob alone
functions as a master control to control the audio level on all channels
together.
each: Each of the ALL/CH-1, CH-2 to CH-4 adjustment knobs is effective
to control each channel.
all: The ALL/CH-1 adjustment knob alone functions as a master control.
When “all” is selected, the ALL indicator to the right of the ALL/CH-1
adjustment knob lights up.
adjustment knob lights up.
143
INDEX PICTURE POSITION
Select the frame of the clip to use as the thumbnail image (index picture)
when recording.
0sec to 10sec: Can be set in the range from 0 seconds (first frame of the
clip) to10 seconds, in units of 1 second.
when recording.
0sec to 10sec: Can be set in the range from 0 seconds (first frame of the
clip) to10 seconds, in units of 1 second.
Menu items in the 100s, relating to the control panels
Item number Item name
Settings
Menu items in the 200s, relating to the remote control interface
Item number
Item name
Settings
214
REMOTE INTERFACE
When the remote control switch is set to REMOTE, select the device from
which to remote-control this unit.
9PIN: Device connected to the REMOTE connector.
which to remote-control this unit.
9PIN: Device connected to the REMOTE connector.
i.LNK: Device connected to the S400 (i.LINK) connector.
215
PC REMOTE
Specify whether to enable FAM connections between this unit and
remote computers.
dis: Disable FAM connections.
ena: Enable FAM connections.
remote computers.
dis: Disable FAM connections.
ena: Enable FAM connections.
257
NETWORK ENABLE
Select the remote control switch positions which enable network
connections.
net: Only when the switch is set to “NETWORK.”
n&9P: When the switch is set to “NETWORK,” and when the switch is set
connections.
net: Only when the switch is set to “NETWORK.”
n&9P: When the switch is set to “NETWORK,” and when the switch is set
to “REMOTE” and extended menu item 214 is set to “9PIN.”
a)
a) FTP connections can be made only when the device connected to the REMOTE
connector (D-sub 9 pin) is in stop mode. During FTP connections, the device connected
to the REMOTE connector cannot be used to control this unit.
to the REMOTE connector cannot be used to control this unit.
Menu items in the 300s, relating to editing operations
Item number Item name
Settings
301
VAR SPEED RANGE FOR
SYNCHRONIZATION
SYNCHRONIZATION
Select the playback speed range when carrying out playback in variable
speed mode from a remote control unit connected to the REMOTE
connector.
–2~+2: –2 to +2 times normal speed.
wide: –2.20 to +2.20 times normal speed.
speed mode from a remote control unit connected to the REMOTE
connector.
–2~+2: –2 to +2 times normal speed.
wide: –2.20 to +2.20 times normal speed.
308
SELECTION OF STD/NON-STD
FOR COMPOSITE VIDEO IN
FOR COMPOSITE VIDEO IN
Select the STD or NON-STD mode in accordance with a composite
video or S-video input.
STD: The STD mode is always used (forced STD mode).
N-STD: Use this setting when the input video signal is unstable (forced
video or S-video input.
STD: The STD mode is always used (forced STD mode).
N-STD: Use this setting when the input video signal is unstable (forced
NON-STD mode).
Note
When using a VCR with no built-in time base corrector (e.g. a home-use
VHS-system VCR), select N-STD.
VHS-system VCR), select N-STD.
310
REC INHIBIT
Select whether recording is inhibited.
off: Do not inhibit recording.
on: Inhibit recording.
off: Do not inhibit recording.
on: Inhibit recording.