First Alert digital waterproof fire safe with ready-seal Benutzerhandbuch

9

10

YOUR SAFE’S UNIQUE IDENTIFICATION NUMBERS
When contacting Consumer Affairs, you should be prepared to supply some 

important information that specifically identifies your safe. This information is 

extremely important to assuring prompt and accurate customer assistance.

It is strongly recommended that you identify and record the following information 

in the Safe Identification Record form located on page 12.

LOCATING MODEL AND SERIAL NUMBERS
Most First Alert® safes include a small metallic silver or gray tag affixed to one of 

the surfaces. This tag is usually located on the front or right side of the safe. This 

tag contains the serial number and on selected models a similar tag is attached 

containing the model number. If a model number tag is not attached to the safe, 

then it can be located on the front or side panel of the box that the safe was 

packaged in. Write this number down for future reference.

KEY NUMBER
The key number is located on 

the key. If you do not have the 

key, the number is also located 

on a sticker on the inside of the 

emergency override key  

lock cover.

.

Moisture Warning 

We recommend that you place delicate items such as pictures or 

intricate jewelry into an air-tight container before storing them in your 

safe. Avoid placing your safe in areas of high humidity. For optimum 

performance, the safe should be opened and aired out for at least 20 

minutes every two (2) weeks.
Firearms Warning 

This safe is not designed to store medication, items with combustible 

content, guns or other weapons.

Pearls 

Because pearls sustain heat damage at temperatures below 350° F, we 

advise that you DO NOT store pearls in this fire safe.

SAFE CARE AND MAINTENANCE
When properly maintained, your safe will continue to operate accurately for many 

years. In order to ensure optimum performance of your safe, please follow these 

simple precautions:
Battery Maintenance 

   Always purchase and use the batteries as specified by this User’s manual. 

   Always replace all batteries at the same time. It is recommended to replace all 

batteries at least once a year or sooner depending on amount of use.

   Always clean the battery contacts in the battery compartment and on the 

batteries before installing new batteries.

   Always make sure all batteries match the polarity (+ and -) signs in the open 

battery compartment.

    If your safe will not be used for an extended period of time, it is recommended 

that you remove the batteries.

   Always promptly remove and properly discard of all used batteries.

Clean Hands - Never attempt to operate the digital keypad if your hands have 

excessive dirt, debris or liquids on them.
Clean Safe – To clean the surface of your safe, it is recommended that you use a 

mild cleaner (e.g., window cleaner) to avoid scratching or discoloring the surface. 

Always wipe dry and NEVER use abrasive cleansers on the safe or digital keypad.
Waterproof – Your new First Alert® Digital Waterproof Fire Safe with 

Ready-Seal™ is designed to help protect your valuables from fire and 

water. This product has been validated to be waterproof when fully 

submerged for up to 1 hour and is not intended for long term underwater 

exposure.
For future reference, store this manual in a secure area away from the safe.  

DO NOT DISCARD!

Use Care and Maintenance

Consumer Affairs