Siemens SL100 Benutzerhandbuch

Registering and de-registering handsets

Gigaset SL 100 / AUS/NZL / A31008-L100-L102-1-7619 / registration.fm / 08.03.2004

Registering and de-registering handsets

You can register up to six handsets on your base station.
An SL 1 handset can be registered on up to four base stations.

Manual registration: Gigaset SL 1 to Gigaset SL 100

You have to initiate handset registration on the handset and on the base station.

1. On the handset

Settings

Register H/Set

Base 1

flashes in the display when the system PIN has been entered.

2. On the base station

The base station search is cancelled after 60 seconds. If registration has not completed

inside this time, repeat the process.
After successful registration, the handset will be assigned the lowest free number.

Manual registration:

Gigaset 1000 to 4000 and other handsets with GAP functionality

This section describes how to connect handsets belonging to the Gigaset families, hand-

sets A 2, C 1, S 1 or handsets of other devices with GAP functionality to your SL 100.

1. On the handset

Start to register the handset as described in its operating instructions.

2. On the base station

The next unassigned internal number (1-6) is automatically assigned to the handset as

it is registered. If all the numbers have been assigned, number 6 is overwritten provided

the handset is in idle status.

Base 1

Select base station (1–4) and confirm, e.g. Base 1.

Enter the system PIN (the factory setting: 0000) and

confirm.

Press the registration/paging key on the base station

for 3 seconds. Registration is initiated.

Press the registration/paging key on the base station

for 3 seconds. Registration is initiated.