Siemens SL100 Benutzerhandbuch
76
Connecting the base station to a PABX
Gigaset SL 100 / AUS/NZL / A31008-L100-L102-1-7619 / pabx.fm / 08.03.2004
Connecting the base station to a PABX
The following settings are only needed when your PABX requires them, please refer to
the operating instructions for your PABX.
Dialling modes and and recall
The current setting is indicated by
‰.
1. Step 2: Changing the dialling mode
The following dialling modes can be set:
◆
Tone dialling (DTMF),
◆
Dial pulsing (DP)
(The decadic or pulse dialling on this device is unsuitable for use in the network in
New Zealand).
v
¢
Base Settings
¢
Add. Features
¢
Dialling Mode
For use in New Zealand please change the flash time to 600 ms.
2. Step 2: Setting the recall
v
¢
Base Settings
¢
Add. Features
¢
Recall
Storing the access code (outside line code)
Precondition: Your PABX requires you to enter an access code before the telephone
number when making an external call, e. g. "0".
v
¢
Base Settings
¢
Add. Features
¢
Access Code
The access code will be automatically inserted before any of the numbers chosen from
the calls list.
i
You cannot send or receive text messages on PABXs that do not support
Calling Line Identification.
s
Select and confirm a dialling mode (highlighted
with
‰).
a
Long press (back to idle status).
OK
s
Select and confirm recall (highlighted with
‰).
a
Long press (back to idle status).
OK
~
Enter or change the access code (maximum 3 digits)
and press the display key.
Save Entry
Confirm. The entry is stored.
a
Long press (back to idle status).
à
OK