Benutzerhandbuch für ADC Telecommunications Inc. DCX0801B

Inhaltsverzeichnis

• INTRODUCTION

  1
• DIGIVANCE CXD SYSTEM OVERVIEW

  1
• Basic Components

  1
• General Description

  1
• Local Service Interface

  1
• Remote NOC Interface

  1
• SYSTEM FUNCTIONS AND FEATURES

  1
• Fiber Optic Transport

  1
• Control and Monitoring Software

  1
• Fault Detection and Alarm Reporting

  1
• Powering

  1
• Equipment Mounting and Configuration

  1
• Hub Subsystem Assemblies

  1
• RAN Subsystem Assemblies

  1
• Communication Interfaces

  1
• INTRODUCTION

  2
• DIGITAL CHASSIS

  2
• RF CHASSIS

  2
• RADIO ACCESS NODE (RAN)

  2
• RAN cabinet

  2
• ELEMENTS COMMON TO HUB AND RAN

  2
• Central Processor Unit (CPU)

  2
• System Interface (STF2)

  2
• Sonet Interface (SIF)

  2
• Small Form-Factor Optical Transceiver (SFP)

  2
• HUB SPECIFIC MODULES

  2
• Full Band Hub Down Converter (FBHDC)

  2
• Forward Simulcast Card (FSC)

  2
• Hub Upconverter Card (HUC)

  2
• Reverse Simulcast Card (RSC)

  2
• Hub Reference Module (HRM)

  2
• Ethernet Hub

  2
• BTS Interface Module (BIM)

  2
• Attenuator Shelf

  2
• RADIO ACCESS NODE (RAN) SPECIFIC MODULES

  2
• Ran Down Converter (RDC or RDC2)

  2
• Ran Up Converter (RUC2.X or RUC3)

  2
• AC Power Entry Controller (APEC)

  2
• DC Power Entry Controller (DPEC)

  2
• CompactPCI Power Supply (cPCI P/S)

  2
• RF Assembly Module (RFA)

  2
• Specifications

  2
• INTRODUCTION

  3
• NETWORKING OVERVIEW

  3
• NODE IDENTIFICATION SCHEMES

  3
• IDENTIFICATION USING THE NETWORK IP RECEIVER/SENDER SYSTEM

  3
• HUB EQUIPMENT IDENTIFICATIONS

  3
• ASSIGNING TENANTS

  3
• Understanding Tenant MIB Indexing

  3
• BTS Connection MIB

  3
• Pathtrace Format

  3
• TENANT CONFIGURATION

  3
• Setting Protocol

  3
• Setting Channels

  3
• Setting Hub Measured Forward Gain

  3
• Setting RAN Measured Forward Gain

  3
• Setting FSC Gain

  3
• Setting RAN Forward Gain Offset

  3
• Setting Reverse Gain

  3
• Setting Reverse Cable Loss

  3
• Using Tenant Reset

  3
• 7.10 Enabling FGC / RGC

  3
• 7.11 Using Tenant Mode

  3
• 7.12 Enabling / Disabling Delay Compensation

  3
• 7.13 Setting Forward / Reverse Delay Skew

  3
• 7.14 Enabling / Disabling RAN slots

  3
• 7.15 Forward/Reverse Target Delay

  3
• 7.16 FSC Attenuator Offsets

  3
• 7.17 Target Simulcast Degree

  3
• 7.18 Module Attenuators

  3
• MANAGING THE TENANT OAM ADDRESS AND HOSTNAME TABLES

  3
• RAN Ordering

  3
• Bracketing of Lost RANs

  3
• Clearing of RANs

  3
• HUB NODE ACCESS/MANAGEMENT

  3
• Managing Hub Nodes

  3
• Identification using the Network IP Receiver/Sender

  3
• Accessing Nodes Locally

  3
• Accessing Nodes via TCP/IP

  3
• Using a Third Party Network Management System with Digivance CXD

  3
• CONFIGURING THE HUBMASTER NODE

  3
• Utilizing The Configure-Hubmaster Script

  3
• Using Dynamic Host Configuration Protocol with Digivance CXD

  3
• CONFIGURING THE HUB “SLAVE” AND RAN NODES

  3
• Managing The Hub Node MIB

  3
• Managing the RAN Node MIB

  3
• BTS VALIDATION

  4
• PATH BALANCING

  4
• Forward Path Balancing

  4
• Reverse Path Balancing

  4
• Functional RAN Call Verification

  4
• SOFTWARE RELEASE DELIVERABLE

  5
• RELEASE NOTES

  5
• UPGRADING EXISTING SYSTEM

  5
• Preliminary Steps

  5
• Upgrade Steps

  5
• VERIFICATION

  5
• FAILED UPGRADES

  5
• FPGA UPDATES

  5
• BACKUP/RESTORE

  5
• Backup

  5
• Restore

  5
• Adding/Removing SNMP Traps

  5
• UPDATING SPARE CPUS

  5
• MIB EXTRACTION

  5
• INTRODUCTION

  6
• FORWARD GAIN MANAGEMENT

  6
• REVERSE AUTOMATIC GAIN CONTROL

  6
• FORWARD DELAY MANAGEMENT

  6
• REVERSE DELAY MANAGEMENT

  6
• FORWARD CONTINUITY

  6
• REVERSE CONTINUITY

  6
• Noise Test

  6
• RAN Down Converter (RDC2) Tone Test

  6
• Hub Up Converter (HUC) Tone Test

  6
• PA OVERPOWER PROTECTION

  6
• HUB OVERPOWER PROTECTION

  6
• MIB RELATIONSHIPS

  7
• HARDWARE RELATIONSHIPS

  7
• Hub/RAN Connection Relationships:

  7
• Tennant Relationships

  7
• WARRANTY/SOFTWARE

  8
• SOFTWARE SERVICE AGREEMENT

  8
• REPAIR/EXCHANGE POLICY

  8
• REPAIR CHARGES

  8
• REPLACEMENT/SPARE PRODUCTS

  8
• RETURNED MATERIAL

  8
• CUSTOMER INFORMATION AND ASSISTANCE

  8
• INTRODUCTION

  1
• DIGIVANCE CXD SYSTEM OVERVIEW

  1
• Basic Components

  1
• General Description

  1
• Local Service Interface

  1
• Remote NOC Interface

  1
• SYSTEM FUNCTIONS AND FEATURES

  1
• Fiber Optic Transport

  1
• Control and Monitoring Software

  1
• Fault Detection and Alarm Reporting

  1
• Powering

  1
• Equipment Mounting and Configuration

  1
• Hub Subsystem Assemblies

  1
• RAN Subsystem Assemblies

  1
• Communication Interfaces

  1
• INTRODUCTION

  2
• DIGITAL CHASSIS

  2
• RF CHASSIS

  2
• RADIO ACCESS NODE (RAN)

  2
• RAN cabinet

  2
• ELEMENTS COMMON TO HUB AND RAN

  2
• Central Processor Unit (CPU)

  2
• System Interface (STF2)

  2
• Sonet Interface (SIF)

  2
• Small Form-Factor Optical Transceiver (SFP)

  2
• HUB SPECIFIC MODULES

  2
• Full Band Hub Down Converter (FBHDC)

  2
• Forward Simulcast Card (FSC)

  2
• Hub Upconverter Card (HUC)

  2
• Reverse Simulcast Card (RSC)

  2
• Hub Reference Module (HRM)

  2
• Ethernet Hub

  2
• BTS Interface Module (BIM)

  2
• Attenuator Shelf

  2
• RADIO ACCESS NODE (RAN) SPECIFIC MODULES

  2
• Ran Down Converter (RDC or RDC2)

  2
• Ran Up Converter (RUC2.X or RUC3)

  2
• AC Power Entry Controller (APEC)

  2
• DC Power Entry Controller (DPEC)

  2
• CompactPCI Power Supply (cPCI P/S)

  2
• RF Assembly Module (RFA)

  2
• Specifications

  2
• INTRODUCTION

  3
• NETWORKING OVERVIEW

  3
• NODE IDENTIFICATION SCHEMES

  3
• IDENTIFICATION USING THE NETWORK IP RECEIVER/SENDER SYSTEM

  3
• HUB EQUIPMENT IDENTIFICATIONS

  3
• ASSIGNING TENANTS

  3
• Understanding Tenant MIB Indexing

  3
• BTS Connection MIB

  3
• Pathtrace Format

  3
• TENANT CONFIGURATION

  3
• Setting Protocol

  3
• Setting Channels

  3
• Setting Hub Measured Forward Gain

  3
• Setting RAN Measured Forward Gain

  3
• Setting FSC Gain

  3
• Setting RAN Forward Gain Offset

  3
• Setting Reverse Gain

  3
• Setting Reverse Cable Loss

  3
• Using Tenant Reset

  3
• 7.10 Enabling FGC / RGC

  3
• 7.11 Using Tenant Mode

  3
• 7.12 Enabling / Disabling Delay Compensation

  3
• 7.13 Setting Forward / Reverse Delay Skew

  3
• 7.14 Enabling / Disabling RAN slots

  3
• 7.15 Forward/Reverse Target Delay

  3
• 7.16 FSC Attenuator Offsets

  3
• 7.17 Target Simulcast Degree

  3
• 7.18 Module Attenuators

  3
• MANAGING THE TENANT OAM ADDRESS AND HOSTNAME TABLES

  3
• RAN Ordering

  3
• Bracketing of Lost RANs

  3
• Clearing of RANs

  3
• HUB NODE ACCESS/MANAGEMENT

  3
• Managing Hub Nodes

  3
• Identification using the Network IP Receiver/Sender

  3
• Accessing Nodes Locally

  3
• Accessing Nodes via TCP/IP

  3
• Using a Third Party Network Management System with Digivance CXD

  3
• CONFIGURING THE HUBMASTER NODE

  3
• Utilizing The Configure-Hubmaster Script

  3
• Using Dynamic Host Configuration Protocol with Digivance CXD

  3
• CONFIGURING THE HUB “SLAVE” AND RAN NODES

  3
• Managing The Hub Node MIB

  3
• Managing the RAN Node MIB

  3
• BTS VALIDATION

  4
• PATH BALANCING

  4
• Forward Path Balancing

  4
• Reverse Path Balancing

  4
• Functional RAN Call Verification

  4
• SOFTWARE RELEASE DELIVERABLE

  5
• RELEASE NOTES

  5
• UPGRADING EXISTING SYSTEM

  5
• Preliminary Steps

  5
• Upgrade Steps

  5
• VERIFICATION

  5
• FAILED UPGRADES

  5
• FPGA UPDATES

  5
• BACKUP/RESTORE

  5
• Backup

  5
• Restore

  5
• Adding/Removing SNMP Traps

  5
• UPDATING SPARE CPUS

  5
• MIB EXTRACTION

  5
• INTRODUCTION

  6
• FORWARD GAIN MANAGEMENT

  6
• REVERSE AUTOMATIC GAIN CONTROL

  6
• FORWARD DELAY MANAGEMENT

  6
• REVERSE DELAY MANAGEMENT

  6
• FORWARD CONTINUITY

  6
• REVERSE CONTINUITY

  6
• Noise Test

  6
• RAN Down Converter (RDC) Tone Test

  6
• Hub Up Converter (HUC) Tone Test

  6
• PA OVERPOWER PROTECTION

  6
• HUB OVERPOWER PROTECTION

  6
• MIB RELATIONSHIPS

  7
• HARDWARE RELATIONSHIPS

  7
• Hub/RAN Connection Relationships:

  7
• Tennant Relationships

  7
• WARRANTY/SOFTWARE

  8
• SOFTWARE SERVICE AGREEMENT

  8
• REPAIR/EXCHANGE POLICY

  8
• REPAIR CHARGES

  8
• REPLACEMENT/SPARE PRODUCTS

  8
• RETURNED MATERIAL

  8
• CUSTOMER INFORMATION AND ASSISTANCE

  8