Manualsbrain.com

English
Español
Français
Italiano
Português
Русский
조선말, 한국어
日本語
中文

Handbücher
Marken
Brother
PT-15

Benutzerhandbuch für Brother PT-15

Brother

Benutzeranleitung (English, Español)

Benutzeranleitung

Inhaltsverzeichnis

Getting Started
2
For Your Information
2
Brother® 90 Days/One Year Limited Warranty and Replacement Service (For USA Only)
4
Important Information
6
GENERAL DESCRIPTION
8
- TOP VIEW
  8
- BOTTOM VIEW
  8
- KEYBOARD & LCD DISPLAY
  9
GENERAL PRECAUTIONS
10
BATTERIES
10
- 1 Remove the battery compartment cover on the back of the machine.
  10
- 2 If batteries are already installed, remove them.
  11
- 3 Insert eight new AA alkaline batteries, making sure that their poles point in the correct direc...
  11
- 4 Attach the battery compartment cover.
  11
OPTIONAL AC ADAPTER
11
- 1 Insert the plug on the adapter cord into the connector marked DC IN 9.5V on the right side of t...
  11
- 2 Insert the plug on the adapter into the nearest standard electrical outlet.
  11
TAPE CASSETTE
12
- 1 Lift open the tape compartment cover. The installed cassette is also released.
  12
- 2 If a tape cassette is already installed, remove it by pulling it straight up.
  12
- 3 If the ink ribbon in the tape cassette to be installed is loose, use your finger to wind the to...
  12
- 4 Insert the tape cassette firmly into the tape compartment, making sure that the entire back of ...
  12
- 5 Close the compartment cover, and then turn on the machine, if it is off.
  12
- 6 Hold down c and press r once to advance the tape and remove any slack (for TZ tape only).
  12
CONNECTING THE P-TOUCH TO A COMPUTER
13
- 1 Insert the flat (A) connector on the USB cable into the USB port on the computer.
  13
- 2 Insert the square (B) connector on the USB cable into the USB port on the right side of the P-t...
  13
- 3 Turn on the P-touch.
  13
INSTALLING THE SOFTWARE AND PRINTER DRIVER
14
- On an IBM PC-Compatible Computer
  14
- The Setup Type dialog box appears.
  16
  - 6 Select the installation method, and then click the Next button.
    17
  - 7 After P-touch Editor is installed, a dialog box appears, allowing you to select whether or not ...
    17
- To install the printer driver, click the Yes button.
  18
- The Choose Destination Location dialog box appears.
  20
  - 6 Click the Next button to begin installation.
    21
- After P-touch Quick Editor is installed, a dialog box appears, allowing you to select where short...
  21
  - 7 Select the desired locations for the shortcuts, and then click the Next button. A dialog box ap...
    21
- To install the printer driver, click the Yes button.
  21
- The first Driver Setup dialog box appears, informing you that the PT-2600/2610 printer driver wil...
  21
- The Choose Destination Location dialog box appears.
  23
  - 6 Click the Next button to begin installation.
    23
- After P-touch AV Editor is installed, a dialog box appears, allowing you to select where shortcut...
  23
  - 7 Select the desired locations for the shortcuts, and then click the Next button. A dialog box ap...
    23
- To install the printer driver, click the Yes button.
  24
- A Driver Setup dialog box appears, allowing you to select whether to replace, add or delete the P...
  27
- The Choose Alias Folder dialog box appears, allowing you to select where an alias to P-touch Edit...
  33
READING THE USER’S GUIDE
40
- On an IBM PC-Compatible Computer
  40
- On a Macintosh Computer
  40
USING P-TOUCH EDITOR 3.2
41
- 1 Click the Start button in the taskbar to display the Start menu.
  41
- 2 Select “Programs”.
  41
- 3 Select “P-touch Editor 3.2”.
  41
- 4 Click “P-touch Editor 3.2”.
  41
- 1 Start up Windows® Explorer.
  41
- 2 Select the drive and directory where P-touch Editor is installed.
  41
- 3 Double-click “Ptedit3.exe”.
  41
- 1 Click (Text button) on the draw toolbar. Text can be typed in, and the pointer changes from (se...
  43
- 2 Move the I-beam pointer to the position in the layout area where you wish to type in text, and ...
  43
- 3 The cursor flashes in the layout area to indicate that you can now type in text.
  43
- 4 Use the computer keyboard to type in the text.
  43
- 5 To create a new line of text, press the keyboard’s Enter key.
  44
USING THE P-TOUCH QUICK EDITOR
44
- 1 Click the Start button in the taskbar to display the Start menu.
  45
- 2 Select “Programs”.
  45
- 3 Click “P-touch Quick Editor”.
  45
- 1 Click the arrow beside the Properties button to display a drop-down menu.
  46
- 2 Click [Tape Settings] to display various label format settings.
  46
- 3 In the Format list, click the desired label format.
  46
- 1 Click the arrow beside the Properties button to display a drop-down menu.
  46
- 2 Click [Text Settings] to display various text format settings.
  46
- 3 In the Text Settings Properties, select the desired text formats.
  46
- 4 Click in the label view, and then type or import the text.
  46
- 1 Select the desired text in the other application.
  47
- 2 Import the text into the label layout either by pressing the designated shortcut keys (Windows®...
  47
- 1 Click the Text History button to display the Text History list.
  47
- 2 Click the desired text.
  47
- 1 Windows®: Right-click in the label view (or text box), select [Symbols] in the menu that appear...
  47
- Macintosh: Hold down the Control key and click in the label view (or text box), select [Symbol fo...
  47
  - 2 In the Symbol Font list, select the desired symbol font.
    47
  - 3 In the Symbol List view, select the desired symbol.
    47
  - 4 Click the OK button. The selected symbol is added at the left of the text.
    47
- Macintosh: Hold down the Control key and click in the label view (or text box), select [Backgroun...
  47
  - 1 Click the arrow beside the Print button to display a drop-down menu.
    48
  - 2 Click [Print Options]. The Print dialog box appears.
    48
  - 3 Select the desired print settings.
    48
- Auto Cut: This option allows you to select whether or not to automatically cut off the label afte...
  48
- Mirror Printing: This option allows you to print the text in reverse so it’s perfect for attachin...
  48
- Copies: This option allows you to enter the number of copies to be printed.
  48
  - 4 Windows®: Click the OK button to start printing.
    48
- Macintosh: Click the Print button. The layout is printed.
  48
USING THE P-TOUCH AV EDITOR
49
- 1 Click the Start button in the taskbar to display the Start menu.
  49
- 2 Select “Programs”.
  49
- 3 Click “P-touch AV Editor”.
  49
- 1 Click(Symbol button). The Input Symbol dialog box appears.
  50
- 2 In the Symbol Font list, select the desired symbol font.
  50
- 3 In the Symbol List view, select the desired symbol.
  50
- 4 Click the OK button. The selected symbol is added to the left of the text.
  50
- 1 Click the arrow beside(Print button) to display a drop-down menu.
  51
- 2 Click [Print Options]. The Print dialog box appears.
  51
- 3 Select the desired print settings.
  51
- 4 Click the OK button to start printing.
  51
UNINSTALLING THE SOFTWARE & PRINTER DRIVER
52
- On an IBM PC-Compatible Computer
  52
- A Driver Setup dialog box appears, allowing you to select whether to replace, add or delete the P...
  53
ATTACHING LABELS
55
- 1 Hold the tape in your left hand, with the printed surface facing up, and hold the stick in your...
  55
- 2 Pass the tape halfway through the long narrow hole in the stick.
  55
- 3 Turn the stick three-quarters of a turn towards you and pull the stick away from you as shown b...
  55
- 4 Peel off the label backing.
  55
PRINT HEAD & ROLLERS
56
- 1 Turn off the machine, and then disconnect the AC adapter and remove the batteries.
  56
- 2 Open the tape compartment cover, and then remove the tape cassette if one is installed. The pri...
  56
- 3 Print head: Use a dry cotton swab to gently wipe the print head with an up-and-down motion. Rol...
  56
- 4 Install a tape cassette, close the tape compartment cover, and then try printing again.
  56
- 5 If a white streak still appears in the label, repeat steps 3 and 4 using a cotton swab dipped i...
  56
POWER KEY
57
CURSOR KEYS
57
CODE, ALT & SHIFT KEYS
58
- 1 Hold down c and press s. The Caps indicator on the left side of the display comes on.
  60
- 2 Press the keys of the desired letters or symbols.
  60
- 3 To exit Caps mode, hold down c and press s. The Caps indicator goes off.
  60
SPACE KEY
61
RETURN KEY
61
NEW BLOCK KEY
63
TAB FUNCTION
64
- 1 Hold down c and press W once. The current tab length is displayed.
  64
- 2 Press e or h until the desired length is displayed or use the number keys to type in the length.
  64
- 3 Press _.
  64
DELETE KEY
66
- 1 Press f, w, e or h to position the cursor below the character immediately to the right of the c...
  66
- 2 Press * once.
  66
- 1 Press f, w, e or h to position the cursor below the character immediately to the right of the l...
  66
- 2 Hold down * until all of the characters that you wish to delete are deleted.
  66
LINE OUT FUNCTION
66
- 1 Press f, w, e or h to position the cursor within the line of text that you wish to delete.
  66
- 2 Hold down c and press P once.
  67
CLEAR FUNCTION
67
- 1 Hold down c and press *.
  67
- 2 Press e or h until TXT&FORMAT is selected (flashing).
  67
- 3 Press _.
  67
- 1 Hold down c and press *.
  68
- 2 Press e or h until TEXT ONLY is selected (flashing).
  68
- 3 Press _.
  68
ACCENT FUNCTION
69
- 1 Hold down c and press A. The message “ACCENT a – u / A – U?” appears on the display.
  70
- 2 Press the key of the letter in the desired accented character.
  70
- 3 Press f or w until the desired accented character appears enlarged within the frame in the midd...
  70
- 4 Press _. The accented character is added to the text.
  70
SYMBOL FUNCTION
71
- 1 Hold down c and press a. A row of symbols appears in the display.
  72
- 2 Press e or h to display different rows of symbols and press f or w until the desired symbol app...
  72
- 3 Press _. The symbol is added to the text.
  72
AUTO FORMAT FUNCTION
73
- 1 Press ior jonce. The A/F indicator comes on.
  73
- 2 Press e or h until the name of the desired layout appears.
  73
- 3 Press _. The first field for the selected layout appears in the display.
  73
- 4 For each field, type in the text, and then press _. When _ is pressed after typing in the text ...
  73
- 5 Press e or h until the CHNGE STL? command is displayed.
  73
- 6 Press _.
  73
- 7 Press e or h to select the desired character style.
  74
- 8 Press _. “MENU” appears in the display.
  74
- 9 Press e or h until the PRINT command is displayed.
  74
- 0 Press _ to print the label, and have machine automatically cut it off. The message “COPIES 1/1...
  74
- A Press e or h until the EDIT MORE command is displayed.
  74
- B Press _. The first field for the selected layout appears in the display.
  74
- C Repeat step 4 until the text is edited as you wish. The MENU appears again when _ is pressed af...
  74
- D Press e or h until the EXIT command is displayed.
  74
- E Press _. The message “EXIT AUTO FORMAT?” appears in the display.
  74
- F Press _. The Auto Format function is exited, and the text that was displayed before the Auto Fo...
  74
STAMP FUNCTION
85
- 1 Type in the text, and then insert a medium (3/4” (18 mm)-wide) or large (1” (24 mm)- wide) stam...
  85
- 2 Hold down c and press U once. The message “STAMP FORMAT?” appears in the display.
  85
- 3 Press _. The text is automatically formatted for the installed stamp: centered within the prese...
  85
- 4 Press p to cut the text out of the stamp stencil film.
  85
- 5 After the stamp stencil film is cut off, remove the backing paper from the stamp stencil film a...
  85
LOCAL FORMAT FUNCTION
88
- 1 Press f, w, e or h to position the cursor in the block that will be given a different format.
  88
- 2 Hold down c and press S once. “BLOCK FORM” appears in the top row of the display to indicate th...
  88
- 3 Select the desired font, size, width, style, underline or frame setting as described on pages8...
  88
FONT FUNCTION
89
- 1 Press k once to display the current font setting.
  89
- 2 Continue pressing k until the desired font setting is displayed.
  89
- 3 Press _ to apply the selected font setting to the text.
  89
SIZE & WIDTH FUNCTIONS
90
- 1 Press l once to display the current size setting.
  91
- 2 Continue pressing l until the desired size setting is displayed.
  91
- 3 Press _ to apply the selected size setting to the text.
  91
- 1 Press n once to display the current width setting.
  92
- 2 Continue pressing n until the desired width setting is displayed.
  92
- 3 Press _ to apply the selected width setting to the text.
  92
STYLE FUNCTION
93
- 1 Press m once to display the current style setting.
  93
- 2 Continue pressing m until the desired style setting is displayed.
  93
- 3 Press _ to apply the selected style setting to the text.
  93
UNDERLINE FUNCTION
95
- 1 While holding down c, press 5 once, and keep c held down to display the current underline setting.
  95
- 2 While still holding down c, continue pressing 5 until the desired underline setting is displayed.
  95
- 3 Release c to apply the selected underline setting to the text.
  95
  - 1 While holding down c, press 5 once, and keep c held down.
    95
- 2 While still holding down c, continue pressing 5 until ON1 is displayed.
  96
- 3 Release c.
  96
FRAME FUNCTION
96
- 1 While holding down c, press 6 once, and keep c held down to display the current frame setting.
  96
- 2 While still holding down c, continue pressing 6 until the desired frame setting is displayed.
  96
- 3 Release c to apply the selected frame setting to the text.
  96
TAPE MARGIN FUNCTION
98
- 1 While holding down c, press E once, and keep c held down to display the current tape margin set...
  98
- 2 While still holding down c, continue pressing E until the desired tape margin setting is displa...
  98
- 3 Release c to apply the selected tape margin setting to the entire text.
  98
HORIZONTAL ALIGNMENT FUNCTION
99
- 1 While holding down c, press R once, and keep c held down to display the current horizontal alig...
  99
- 2 While still holding down c, continue pressing R until the desired horizontal alignment setting ...
  99
- 3 Release c to apply the selected horizontal alignment setting to the entire text.
  99
MIRROR PRINTING FUNCTION
100
- 1 While holding down c, press p once, and keep c held down to display the current mirror printing...
  100
- 2 While still holding down c, continue pressing p until the desired mirror printing setting is di...
  100
- 3 Release c to apply the selected mirror printing setting to the entire text.
  100
LENGTH FUNCTION
101
- 1 While holding down c, press T once, and keep c held down to display the current length of the l...
  101
- 2 While still holding down c, continue pressing T until the desired label length setting is displ...
  101
- 3 Release c. If ON was selected, the current label length setting is displayed.
  101
- 4 Press e or h to select the desired length or use the number keys to enter a length.
  101
- 5 Press _.
  102
BARCODE FUNCTION
102
- 1 Hold down c and press Y once.
  103
- 2 Type in the new barcode data or edit the old data.
  103
- 3 Press e.
  103
- 4 Press f or w until the parameter that you wish to change appears.
  103
- 5 Press e or h until the desired setting is displayed.
  103
- 6 Repeat steps 4 and 5 until all parameters are set as you wish.
  103
- 7 Press _.
  103
- 8 Press f or w until the cursor is below the character immediately to the right of where you wish...
  103
- 9 Hold down c and press a.
  103
- 0 Press e or h until the desired special character is displayed.
  103
- A Press _ to add the selected special character to the barcode data.
  104
- B Press _.
  105
  - 1 Hold down c and press Y once.
    105
  - 2 Press e.
    105
  - 3 Press f or w until the CH.DIG. parameter is displayed.
    105
  - 4 Press e or h until ON is displayed.
    105
  - 5 Press _.
    105
  - 6 Press 1, 2, 3, then 4.
    105
  - 7 Press _.
    105
TZ CUT FUNCTION
106
- 1 While holding down c, press Z once, and keep c held down to display the current TZ cut setting.
  106
- 2 While still holding down c, continue pressing Z until the desired TZ cut setting is displayed.
  106
- 3 Release c to apply the selected TZ cut setting.
  106
PRINT KEY
107
FEED & CUT FUNCTION
107
NUMBERING FUNCTION
108
- 1 Hold down c and press O. The message “START?” appears in the display.
  108
- 2 Press f, w, e or h until the first character that you wish to select for the numbering field is...
  108
- 3 Press _. The message “END?” appears in the display.
  108
- 4 Press f, w, e or h until all of the characters that you wish to select for the number field are...
  108
- 5 Press _. The message “NUMBER” appears in the display.
  108
- 6 Press e or h until the desired number of copies is displayed, or use the number keys to type in...
  109
- 7 Press p (or _).
  109
- 8 Press e or h until the desired setting (EACH LABEL or AFTER LAST) is displayed. If EACH LABEL i...
  109
- 9 Press p or _ to begin printing the labels. The number of the copy being printed is displayed.
  109
  - 1 Hold down c and press O.
    109
  - 2 Press _.
    109
  - 3 Make sure that just “1” is flashing, and then press _.
    109
  - 4 Press 3.
    109
  - 5 Press p (or _).
    110
  - If TZ tape is being printed on:
    110
  - 6 Press p (or _).
    110
REPEAT PRINTING FUNCTION
111
- 1 Hold down c and press I. The message “COPIES” appears in the display with the default setting 1...
  111
- 2 Press e or h until the desired number of copies is displayed, or use the number keys to type in...
  111
- 3 Press p (or _)
  111
- 4 Press e or h until the desired setting (EACH LABEL or AFTER LAST) is displayed. If EACH LABEL i...
  111
- 5 Press p (or _) to begin printing the labels. The number of the copy being printed is displayed.
  111
  - 1 Hold down c and press I.
    112
  - 2 Press 3.
    112
  - 3 Press p (or _).
    112
  - If TZ tape is being printed on:
    112
  - 4 Press p (or _).
    113
MEMORY FUNCTIONS
113
- 1 Hold down c and press 7. The message “STORE” appears on the display with the first available fi...
  113
- 2 Press e or h to select the file number where you wish to store the text.
  114
- 3 Press _. The text is stored under the selected file number and the text previously shown in the...
  114
  - 1 Hold down c and press 7.
    114
  - 2 Press e or h until file number 4 is displayed.
    114
  - 3 Press _.
    114
- 1 Hold down c and press 8. The message “RECALL” appears on the display with the file number and b...
  115
- 2 Press e or h to select the file number containing the text that you wish to recall. The text st...
  115
- 3 Press _. Any text previously entered in the display is erased and the text stored under the sel...
  115
  - 1 Hold down c and press 8.
    115
  - 2 Press e or h until file number 1 is displayed.
    115
  - 3 Press _.
    115
- 1 Hold down c and press 9. The message “CLEAR” appears on the display with the file number and be...
  116
- 2 Press e or h to select the file number containing the text that you wish to delete. The text st...
  116
- 3 Press _. The message “OK TO CLEAR?” appears.
  116
- 4 Press _ to delete the text file that was selected.
  116
  - 1 Hold down c and press 9.
    116
  - 2 Press e or h until file number 4 is displayed.
    116
  - 3 Press _.
    116
  - 4 Press _.
    116
- 1 Hold down c and press 0. “PRINT” appears on the display with the file number and beginning of t...
  117
- 2 Press e or h to display the file containing the text that you wish to print. The text stored un...
  117
- 3 Press r so that the file number flashes.
  117
- 4 Repeat steps 2 and 3 until the file numbers for all files that you wish to print are flashing.
  117
- 5 Press _. The text stored under the selected file numbers is printed.
  117
- 1 Press i or j, depending on the type of layout that you wish to print.
  117
- 2 Hold down c and press 0. The name of the layout appears in the top line of the display and the ...
  117
- 3 Press e or h to display the file containing the text that you wish to print. The text stored un...
  117
- 4 Press r so that the file number flashes.
  117
- 5 Repeat steps 3 and 4 until the file numbers for all files that you wish to print are flashing.
  117
- 6 Press _. “MENU” appears in the display.
  117
- 7 Make sure that PRINT is flashing, and then press _. All of the selected files are printed.
  117
- 8 Press e or h until the CHNGE STL? command is displayed.
  117
- 9 Press _.
  118
- 0 Press e or h to select the desired character style.
  118
- A Press _. “MENU” appears in the display.
  118
- B Press e or h until the PRINT MORE command is displayed.
  118
- C Press _. The name of the layout appears in the top line of the display and the file number and ...
  118
- D Press e or h to display the file containing the text that you wish to print.
  118
- E Press r so that the file number flashes.
  118
- F Repeat steps D and E until the file numbers for all files that you wish to print are flashing.
  118
- G Press _. “MENU” appears in the display.
  118
- H Make sure that PRINT is flashing, and then press _. All of the selected files are printed.
  118
- I Press e or h until the EXIT command is displayed.
  118
- J Press _
  118
  - 1 Hold down c and press 0.
    118
  - 2 Since this is one of the files that we wish to print, press r.
    118
  - 3 Press e or h until file number 2 is displayed.
    118
  - 4 Press r.
    119
  - 5 Press _.
    119
- 1 Press i.
  119
- 2 Hold down c and press 0.
  119
- 3 Since this is one of the files that we wish to print, press r.
  119
- 4 Press e or h until file number 3 is displayed.
  119
  - 5 Press r.
    120
  - 6 Press _.
    120
- 7 Press _.
  120
TROUBLESHOOTING
121
ERROR MESSAGE LIST
122
SPECIFICATIONS
127
ACCESSORIES (For USA Only)
129
INDEX
132
- A
  132
- B
  132
- C
  132
- D
  132
- E
  132
- F
  132
- I
  132
- K
  132
- L
  132
- M
  132
- N
  132
- O
  132
- P
  133
- R
  133
- S
  133
- T
  133
- U
  133
- W
  133
PT-2600/2610 CONTACT INFORMATION (For USA Only)
135
Service Center Locations
135
Operational Assistance
135
Assistance on the Internet
135
Accessories and Supplies
135
Fax-Back System
135
- P-TOUCH ACCESSORY ORDER FORM (For USA Only)
  136
PT-2600/2610 CONTACT INFORMATION (For USA Only)
137
Service Center Locations
137
Operational Assistance
137
Assistance on the Internet
137
Accessories and Supplies
137
Fax-Back System
137
- P-TOUCH ACCESSORY ORDER FORM (For USA Only)
  138

Benutzeranleitung

Größe:

5,05 MB
Seiten:

250
Languages:

English, Español

Handbuch öffnen

Manualsbrain.com

Über uns
DMCA
Kontakte
Privacy Policy

Manualsbrain © copyright 2024