BetriebsanweisungInhaltsverzeichnisFor information on included items and items sold separately2Preparations2Shooting2Playback/Erasing2Menus and Settings2Handling precautions, references to the various shooting and playback functions2Printing21. Charging the Battery.31. Insert the battery into the battery charger.32. Plug the battery charger (CB-2LU) into a power outlet, or attach the power cord to the battery...32. Installing the Battery.41. Slide the lock release switch in the direction of the arrow (), and open the memory card slot/...42. Push the battery lock in the direction of the arrow as shown () and insert the battery until i...43. Inserting the Memory Card.41. Insert the memory card until it clicks into place.42. Close the memory card slot/battery cover.41. Press the power button ().62. Use the or button to select an item and the or button to change its value ().63. Confirm that the correct time is displayed and press the FUNC./SET button ().61. Turn the mode dial to (playback).62. Hold down the FUNC./SET button and press the MENU button.63. Use the , , or button to select a language and press the FUNC./SET button.61. Press the power button.72. Turn the mode dial to (Auto).73. Aim the camera at the subject.74. Focus and shoot.71. Press the shutter button halfway to focus.72. Press the shutter button fully to shoot.71. Turn the mode dial to the desired mode ().81. Press the zoom lever toward or .101. Press the button to cycle through flash settings.111. Press the / button to switch modes.121. Turn the mode dial to (playback).132. Use the or button to display the image you wish to view.131. In the playback mode, use the or button to select an image to erase () and press the button ().132. Confirm that [Erase] is selected and press the FUNC./SET button ().131. Connect the camera to a Direct Print compatible printer and turn on the printer's power.162. Confirm that , or is displayed in the upper left of the LCD monitor ().173. Use the or button to select an image to print () and press the button ().171. Install the software.201. Place the Canon Digital Camera Solution Disk in the computer's CD-ROM drive.202. Click the Digital Camera Software [Install] button and click [Next].203. Select [Easy Installation] as the setup type and click [Next].204. When the installation is complete, select [Yes, I want to restart my computer now.] and click ...205. Remove the Canon Digital Camera Solution Disk from the CD-ROM drive after restarting.202. Connecting the camera to a computer.211. Connect the supplied interface cable to the computer's USB port and to the camera's DIGITAL te...212. Turn the camera's mode dial to (playback) and turn on the power.211. Select [Canon CameraWindow] and click [OK] (first time only).222. Download the images.221. Download the images.231. Confirm that the Direct Transfer menu is displayed on the camera's LCD monitor.242. Select , or and press the button.242. Select or and press the button (or the FUNC./SET button).253. Select images to download and press the button (or the FUNC./SET button).25Print Settings/Transfer Settings1See Menus and Settings (p. 27).1See Menus and Settings (p. 27).1l The output of some printers or photo developing services may not reflect the specified print se...1Print Type1Standard1Prints one image per page.1Index1Prints the selected images together at a reduced size in an index format.1Both1Prints the images in both the standard and index formats.1Date1Adds the date to the print.1File No.1Adds the file number to the print.1See Menus and Settings (p. 27).1- Index [Date] and [File No.] cannot be set to [On] at the same time.1- Standard or Both [Date] and [File No.] can be set to [On] at the same time, however, the printa...1See Menus and Settings (p. 27).1See Menus and Settings (p. 27).1Viewing Images on a TV set1- NTSC: Japan, U.S.A., Canada, Taiwan and others1- PAL: Europe, Asia (excluding Taiwan), Oceania and others1If the video system is set incorrectly, the camera output may not display properly.1Customizing the Camera (My Camera Settings)7See Menus and Settings (p. 27).7l The following cannot be registered as My Camera settings.1- Movies1- Sounds recorded with the sound memo function (p. 76)1Troubleshooting1Power is not turned on.1Press the power button (Basic Guide p. 5).1Memory card slot/battery cover is open.1Confirm that the memory card slot/ battery cover is securely closed (Basic Guide p. 2).1Insufficient battery voltage ("Change the battery pack" message displays).1Insert a fully charged battery into the camera (Basic Guide p. 2).1Use the AC Adapter Kit ACK900 (sold separately) (p. 109).1Poor contact between camera and battery terminals.1Polish the terminals with a soft cotton swab before charging or using the battery (p. 105).1The camera's horizontal/ vertical orientation was changed.1The camera's orientation mechanism is operating. There is no malfunction.1The memory card's write protect tab is set to "Write protect".1When recording to, erasing from or formatting the memory card, slide the tab upward (p. 107).1The built-in rechargeable lithium battery charge is low.1Replace it at once with a charged battery (Basic Guide p. 4).1Camera automatically lightened the image displayed on the LCD monitor to make it easier to see wh...1There is no effect on the recorded image.1Mode dial is set to (playback).1Set the mode dial to , , or (Basic Guide p. 6).1Flash is charging.1The indicator will light orange when it is charged. You can then press the shutter button (p. 22).1Memory card is full.1Insert a new memory card (Basic Guide p. 2).1If required, download the images to a computer and erase them from the memory card to make space ...1Memory card is not formatted correctly.1Format the memory card (p. 23).1If reformatting does not work, the memory card logic circuits may be damaged. Consult the nearest...1SD memory card is write protected.1Slide the write protect tab of the SD memory card upward (p. 107).1Usually the recorded image contains more of the scene than is seen in the viewfinder.1Confirm the actual image size with the LCD monitor. Use the LCD monitor when taking close-up shot...1AF-assist Beam is set to [Off].1In dark places where it is difficult for the camera to focus, the AF-assist Beam will emit to ass...1The camera moves when the shutter button is pressed.1Setting the self-timer to (2 seconds) delays the shutter release for 2 seconds and allows the cam...1Subject is out of focal range.1Shoot with the subject at the correct shooting distance (p. 113).1Use the Infinity mode to shoot distant subjects (Basic Guide p. 10).1The subject is hard to focus on.1Use the focus lock or AF lock to shoot (p. 47).1Insufficient light for shooting.1Set the flash to (flash on) (Basic Guide p. 9).1Subject is dark in contrast to the background.1Set the exposure compensation to a positive (+) setting (p. 51).1Use AE lock or use the spot metering function (pp. 48, 50).1Subject is too far away for flash to reach.1Shoot within correct shooting distance of the subject when using the built-in flash (p. 114).1Raise the ISO sensitivity and then shoot (p. 64).1Light reflecting back from eyes can make them appear red when the flash is used in dark areas.1Use the (auto with red-eye reduction) mode (Basic Guide p. 9). For this mode to be effective, the...1Even better results can be obtained by increasing the lighting in indoor settings or approaching ...1The memory card's performance has dropped.1To enhance the continuous shooting performance, you are recommended to format the memory card in ...1Memory card was formatted in another device.1Use a memory card formatted in your camera (p. 23).1Memory card slot/battery cover was opened with power on.1First close the memory card slot/ battery cover and then turn the power off (Basic Guide p. 2).1The following types of memory cards are used.1Although the recording time may not display properly during shooting, the movie will be recorded ...1If free space in the camera's built-in memory becomes too scarce, the "!" symbol will display on ...1Try the following procedures.1Zoom lever was pressed while shooting in movie mode.1Operate the zoom before shooting in movie mode (Basic Guide p. 8). Note the digital zoom is avail...1Memory card was formatted in another device.1Use a memory card formatted in your camera (p. 23).1Battery life exceeded if battery loses its charge quickly at normal temperature (23 C/73 F).1Replace the battery with a new one (Basic Guide p. 2).1Battery life exceeded.1Replace the battery with a new one (Basic Guide p. 2).1Incorrect video system setting.1Set the video system to the appropriate setting, NTSC or PAL, for your TV (p. 30).1Shooting in Stitch Assist mode.1The output will not appear on a TV in Stitch Assist mode. Cancel the Stitch Assist mode (Basic Gu...1List of Messages1Busy...1Image is being recorded to, or read from, memory card. The playback mode is starting up.1No memory card1You turned on the camera without a memory card installed.1Card locked!1The SD memory card is write-protected.1Cannot record1You attempted to shoot an image without a memory card installed, or attempted to attach a sound m...1Memory card error1Memory card has experienced an anomaly.1Memory card full1Memory card is full of images and no more can be recorded or saved. Or no more image settings or ...1Naming error!1The image could not be created because there is an image with the same name as the directory that...1Cannot register this image!1You attempted to register an image recorded in a different camera or a movie as a start-up image.1Protected!1You attempted to erase or edit a protected image, movie or sound memo.1Too many marks.1Too many images have been marked with print settings, transfer settings or slide show settings. C...1Cannot complete!1Could not save the print, transfer or slide show settings.1Unselectable image.1You attempted to set the print settings for a non-JPEG image.1Exx1(xx: number) Camera malfunction. Turn the power off and then back on, then shoot or play back. A ...1Appendix1The following icon and message will display.1Battery charge is low. Recharge it as soon as possible it will be used for an extended period.1Dirty terminals may cause poor contact between the battery and camera. Polish the terminals with ...1Under these conditions, review the battery by warming it in a pocket immediately before use.1The battery may be short circuiting.1Fig. A1These conditions can damage the battery.1Slide the switch up.1• Locations subject to dust or sand1• Locations subject to high humidity and high temperatures1• The card supplied with the camera may be used without further formatting.1• When the camera is malfunctioning, a corrupted memory card might be the cause. Reformatting the...1• When a non-Canon brand memory card is malfunctioning, reformatting it may solve the problem.1• Memory cards formatted in other cameras, computers, or peripheral devices may not operate corre...1Turn the camera power off before connecting or disconnecting the AC adapter.1Never use thinners, benzene, synthetic cleansers or water to clean the camera. These substances m...1Never use synthetic cleansers on the camera body or lens. If dirt remains, contact the closest Ca...1Never rub or press strongly on the LCD monitor. These actions may damage it or lead to other prob...1Please Read This First1Größe: 3,31 MBSeiten: 27Language: EnglishHandbuch öffnen