Benutzerhandbuch für Cisco Systems 9000

Inhaltsverzeichnis

• Cisco ASR 9000 Series Aggregation Services Router Hardware Installation Guide

  1
• Contents

  3
  • Preface

    9
    • Safety Guidelines

      13
      • General Safety Guidelines

        13
      • Compliance and Safety Information

        14
      • Laser Safety

        14
      • Energy Hazard

        14
      • Preventing Electrostatic Discharge Damage

        14
        • Figure 1-1 ESD Label Information on Router Chassis

          15
        • Figure 1-2 Connecting an ESD-Preventive Wrist Strap to the Cisco ASR 9010 Router Chassis

          15
        • Figure 1-3 Connecting an ESD-Preventive Wrist Strap to the Cisco ASR 9006 Router Chassis

          16
        • Figure 1-4 Connecting an ESD-Preventive Wrist Strap to the Cisco ASR 9904 Router Chassis

          17
        • Figure 1-5 Connecting an ESD-Preventive Wrist Strap to the Cisco ASR 9922 Router Chassis

          18
        • Figure 1-6 Connecting an ESD-Preventive Wrist Strap to the Cisco ASR 9912 Router Chassis

          19
      • Lifting Guidelines

        19
    • Site Requirement Guidelines

      20
      • Site Layout and Equipment Dimensions

        20
        • Figure 1-7 Cisco ASR 9010 Router Chassis Footprint and Dimensions—Top-Down View

          22
        • Figure 1-8 Cisco ASR 9006 Router Chassis Footprint and Dimensions—Top-Down View

          23
        • Figure 1-9 Cisco ASR 9904 Router Chassis Footprint and Dimensions—Top-Down View

          24
        • Figure 1-10 Cisco ASR 9922 Router Chassis Footprint and Dimensions—Top-Down View

          25
        • Figure 1-11 Cisco ASR 9912 Router Chassis Footprint and Dimensions—Top-Down View

          26
      • Site Wiring Guidelines

        27
      • Chassis Air Flow Guidelines

        27
        • Table 1-1 Chassis Air Flow Guidelines

          27
        • Figure 1-12 Air Flow Path through the Cisco ASR 9010 Router—Side View

          28
        • Figure 1-13 Air Flow Path through the Cisco ASR 9006 Router—Front View

          29
        • Figure 1-14 Air Flow Path through the Cisco ASR 9904 Router—Front View

          29
        • Figure 1-15 Air Flow Path through the Cisco ASR 9922 Router—Side View

          30
        • Figure 1-16 Air Flow Path through the Cisco ASR 9912 Router—Side View

          31
      • Rack-Mounting and Air Flow Clearance Guidelines

        32
        • Figure 1-17 Telco-Type Equipment Racks

          32
        • Telco 2-Post Rack

          33
          • Figure 1-18 Cisco ASR 9010 Router Mounted in a 2-Post Rack

            33
          • Figure 1-19 Cisco ASR 9006 Router Mounted in a 2-Post Rack

            34
          • Figure 1-20 Cisco ASR 9904 Router Mounted in a 2-Post Rack

            35
        • Open 4-Post Rack

          36
          • Figure 1-21 Cisco ASR 9912 Router Mounted in an Open 4-Post Rack

            36
          • Figure 1-22 Cisco ASR 9912 Router Mounted in an Open 4-Post Rack

            37
        • 4-Post Enclosed Rack with Perforated Sides

          38
        • Air Flow Guidelines for Enclosed Rack Installation

          38
        • Cisco ASR 9010 Router Clearance Requirements

          38
          • Figure 1-23 Cisco ASR 9010 Router Clearance Requirements for an Enclosed 4-Post Rack Installation

            39
        • Cisco ASR 9006 Clearance Requirements

          40
          • Figure 1-24 Cisco ASR 9006 Router Clearance Requirements for an Enclosed 4-Post Rack Installation

            41
        • Cisco ASR 9904 Clearance Requirements

          42
          • Figure 1-25 Cisco ASR 9904 Router Clearance Requirements in a 4-Post Rack Installation

            43
        • Cisco ASR 9922 Clearance Requirements

          44
          • Figure 1-26 Cisco ASR 9922 Router Clearance Requirements in a 4-Post Rack Installation

            45
        • Cisco ASR 9912 Clearance Requirements

          46
          • Figure 1-27 Cisco ASR 9912 Router Clearance Requirements in a 4-Post Rack Installation

            47
      • Temperature and Humidity Guidelines

        48
      • Power Connection Guidelines

        48
        • Table 1-2 Cisco ASR 9000 Series Routers Supported Power Systems

          48
        • AC-Powered Routers

          49
          • Table 1-3 AC Input Power Cord Options for Version 1 Power System

            49
          • Table 1-4 AC Input Power Cord Options for Version 2 and Version 3 Power System

            50
        • AC Power Cord Illustrations (Version 1 Power)

          50
          • Figure 1-28 AC Power Cord CAB-7513ACA=

            50
          • Figure 1-29 AC Power Cord CAB-AC-16A-AUS

            51
          • Figure 1-30 AC Power Cord CAB-AC16A-CH=

            51
          • Figure 1-31 AC Power Cord CAB-7513ACE=

            51
          • Figure 1-32 AC Power Cord CAB-2500W-EU=

            52
          • Figure 1-33 AC Power Cord CAB-AC-2500W-EU=

            52
          • Figure 1-34 AC Power Cord CAB-AC-2500W-INT=

            52
          • Figure 1-35 AC Power Cord CAB-AC-2500W-ISRL=

            53
          • Figure 1-36 AC Power Cord CAB-7513ACI=

            53
          • Figure 1-37 AC Power Cord CAB-AC-2500W-US1=

            53
          • Figure 1-38 AC Power Cord CAB-AC-C6K-TWLK=

            54
          • Figure 1-39 AC Power Cord CAB-7513ACSA=

            54
          • Figure 1-40 AC Power Cord CAB-ACS-16=

            54
        • AC Power Cord Illustrations (Version 2 and Version 3 Power)

          55
          • Figure 1-41 AC Power Cord PWR-CAB-AC-CHN=

            55
          • Figure 1-42 AC Power Cord PWR-CAB-AC-EU=

            55
          • Figure 1-43 AC Power Cord PWR-CAB-AC-ISRL=

            55
          • Figure 1-44 AC Power Cord PWR-CAB-AC-USA=

            56
          • Figure 1-45 AC Power Cord PWR-CAB-AC-AUS=

            56
          • Figure 1-46 AC Power Cord PWR-CAB-AC-ITA=

            56
          • Figure 1-47 AC Power Cord PWR-CAB-AC-BRA=

            57
          • Figure 1-48 AC Power Cord PWR-CAB-AC-SA=

            57
          • Figure 1-49 AC Power Cord PWR-CAB-AC-UK=

            57
          • Figure 1-50 AC Power Cord PWR-CAB-AC-SUI=

            58
          • Figure 1-51 AC Power Cord PWR-CAB-AC-JPN=

            58
        • DC-Powered Router

          58
          • Figure 1-52 Typical DC Power Cable Lug

            60
          • Figure 1-53 Typical Source DC Power Cabling Scheme for a Single DC Power Module—Version 1 Power System

            61
          • Figure 1-54 Typical Source DC Power Cabling Scheme for a Single DC Power Module—Version 2 Power System

            62
          • Figure 1-55 Typical Plastic Safety Cover over the Power Tray Connection Terminals—Version 2 and Version 3 Power System

            62
          • Figure 1-56 Typical Source DC Power Cabling Scheme for a Single DC Power Module—Version 3 Power System

            63
      • NEBS Supplemental Unit Bonding and Grounding Guidelines

        64
        • Figure 1-57 NEBS Bonding and Grounding Points on the Cisco ASR 9006 Router Chassis

          64
        • Figure 1-58 NEBS Bonding and Grounding Point on the Cisco ASR 9006 Router Chassis

          65
        • Figure 1-59 NEBS Bonding and Grounding Point on the Cisco ASR 9904 Router Chassis

          65
          • Figure 1-60 NEBS Bonding and Grounding Point on the Cisco ASR 9912 Router

            66
          • Figure 1-61 NEBS Bonding and Grounding Point on the Cisco ASR 9922 Router

            66
    • RSP and RP Port Connection Guidelines

      67
      • Console Port and Auxiliary Port Connection Guidelines

        67
        • Console Port Signals

          68
          • Table 1-5 RSP/RP Console Port Signals

            68
        • Auxiliary Port Signals

          68
          • Table 1-6 RSP/RP AUX Port Signals

            68
      • Management LAN Ports Connection Guidelines

        69
        • Table 1-7 RSP/RP Management LAN Port Signals

          69
        • Management LAN Port LED Indicators

          69
          • Figure 1-62 RSP/RP Management LAN Port LED Indicators

            70
        • Management LAN RJ-45 Cabling

          70
          • Figure 1-63 Straight-Through Cable Pinout to a Hub, Repeater or Switch

            70
          • Figure 1-64 Crossover Cable Pinout Between RSPs/RPs

            70
      • Alarm Connection Guidelines

        71
        • Figure 1-65 Alarm Connector on the RSP/RP Card Front Panel

          71
          • Table 1-8 Alarm Connector Pinout

            72
      • Sync Port Connection Guidelines

        72
        • Figure 1-66 SYNC Port Connector

          73
          • Table 1-9 BITS/J.211 Connector Pinout

            73
      • SFP/SFP+ Port

        73
      • GPS Interface

        73
      • Inter Chassis Synchronization Port

        73
      • CMP Port

        74
      • RSP Compact Flash Slot

        74
      • USB Port

        74
    • Pre-Installation Considerations and Requirements

      75
    • Installation Overview

      76
      • Figure 2-1 Cisco ASR 9010 Router Packaged on a Shipping Pallet

        76
      • Required Tools and Equipment

        77
    • Unpacking the Router

      77
      • Unpacking the Cisco ASR 9010 Router

        77
        • Step 1 Cut the straps that secure the cardboard shipping container to the pallet.

          77
        • Step 2 Remove the cardboard shipping container.

          77
        • Step 3 Remove the packaging material (see Figure 2-2).

          77
        • Step 4 Remove two bolts per hold-down bracket that secure the brackets to the pallet.

          77
          • Figure 2-2 Unpacking the Cisco ASR 9010 Router from the Shipping Container and Pallet

            78
        • Step 5 Remove components, such as line cards and the fan tray, to reduce the weight before lifting or moving the chassis. See the Removing Components Before Installing the Chassis, page 2-18 for more information.

          78
        • Step 6 Save the packaging materials in case the router needs repackaging or shipping.

          78
      • Unpacking the Cisco ASR 9006 Router

        79
        • Step 1 Cut the straps that secure the cardboard shipping container to the pallet.

          79
        • Step 2 Remove the cardboard shipping container.

          79
        • Step 3 Remove the packaging material (Figure 2-3).

          79
          • Figure 2-3 Unpacking the Cisco ASR 9006 Router from the Shipping Container and Pallet

            80
        • Step 4 Remove components, such as line cards, power supplies, and the fan tray, to reduce the weight before lifting or moving the chassis. See Removing Components Before Installing the Chassis, page 2-18 for more information.

          81
        • Step 5 Save the packaging materials in case the router needs repackaging or shipping.

          81
      • Unpacking the Cisco ASR 9904 Router

        81
        • Step 1 Cut the straps that secure the cardboard shipping container to the pallet.

          81
        • Step 2 Remove the corrugated top shipping container.

          81
        • Step 3 Remove the accessories and corrugated packing accessory tray.

          81
        • Step 4 Remove the packing material (Figure 2-4).

          81
          • Figure 2-4 Unpacking the Cisco ASR 9904 Router from the Shipping Container and Pallet

            82
        • Step 5 Remove components, such as line cards, power supplies, and the fan tray, to reduce the weight before lifting or moving the chassis. See Removing Components Before Installing the Chassis, page 2-18 for more information.

          82
        • Step 6 Save the packaging materials in case the router needs repackaging or shipping.

          82
      • Unpacking the Cisco ASR 9922 Router

        83
        • Step 1 Remove any strapping on the outside of the crate.

          83
        • Step 2 Remove the crate cap door. Disengage the twist locks located along the bottom first. Then, disengage the twist locks located along the sides, working your way up from the bottom to the top. Refer to the right and middle figures in Figure 2-5.

          83
        • Step 3 Remove the crate cap. Disengage the twist locks located around the bottom of the crate cap (Figure 2-5).

          83
        • Step 4 Remove the foam packaging material from the top of the router.

          83
        • Figure 2-5 Unpacking the Cisco ASR 9922 Router from the Shipping Container

          83
          • Step 5 Using a 5/16” wrench or ratchet, remove the four attachment bolts and cross-brace from the shipping rack (Figure 2-6).

            83
            • Figure 2-6 Cross-brace and Attachment Bolts on the Shipping Rack

              84
          • Step 6 Use a Phillips screwdriver to unscrew the rear mounting flange from the system and rack.

            85
          • Step 7 Use a Phillips screwdriver to unscrew the front mounting flange from the rack.

            85
          • Step 8 Remove two bolts per hold-down bracket that secure the brackets to the pallet (Figure 2-7).

            85
            • Figure 2-7 Hold-Down Brackets on the Cisco ASR 9922 Router Shipping Pallet

              85
          • Step 9 Save the rear brackets and screws from the shipping packaging for reuse in rack mounting of the chassis (Figure 2-8).

            85
            • Figure 2-8 Rack Mount Installation Kit for the Cisco ASR 9922 Router

              86
          • Step 10 Remove components, such as line cards and fan trays, to reduce the weight before lifting or moving the chassis. See Removing Components Before Installing the Chassis, page 2-18 for procedures showing how to remove these components.

            86
          • Step 11 Save the packaging materials in case the router needs to be repackaged for shipping.

            86
      • Unpacking the Cisco ASR 9912 Router

        87
        • Step 1 Remove any strapping on the outside of the crate.

          87
        • Step 2 Remove the crate cap door. Disengage the twist locks located along the bottom first. Then, disengage the twist locks located along the sides, working your way up from the bottom to the top. Refer to the right and middle figures in Figure 2-9.

          87
        • Step 3 Remove the crate cap. Disengage the twist locks located around the bottom of the crate cap (Figure 2-9).

          87
        • Step 4 Remove the foam packaging material from the top of the router.

          87
        • Figure 2-9 Unpacking the Cisco ASR 9912 Router from the Shipping Container

          87
          • Step 5 Using a 5/16” wrench or ratchet, remove the four attachment bolts and cross-brace from the shipping rack (Figure 2-10).

            87
            • Figure 2-10 Cross-brace and Attachment Bolts on the Shipping Rack

              88
          • Step 6 Use a Phillips screwdriver to unscrew the rear mounting flange from the system and rack.

            89
          • Step 7 Use a Phillips screwdriver to unscrew the front mounting flange from the rack.

            89
          • Step 8 Remove two bolts per hold-down bracket that secure the brackets to the pallet (Figure 2-11).

            89
            • Figure 2-11 Hold-Down Brackets on the Cisco ASR 9912 Router Shipping Pallet

              89
          • Step 9 Save the rear brackets and screws from the shipping packaging for reuse in rack mounting of the chassis (Figure 2-12).

            89
            • Figure 2-12 Rack Mount Installation Kit for the Cisco ASR 9912 Router

              90
          • Step 10 Remove components, such as line cards and fan trays, to reduce the weight before lifting or moving the chassis. See Removing Components Before Installing the Chassis, page 2-18 for procedures showing how to remove these components.

            90
          • Step 11 Save the packaging materials in case the router needs to be repackaged for shipping.

            90
      • Positioning the Router

        91
        • Positioning the Cisco ASR 9010 Router, Cisco ASR 9006 Router, and Cisco 9904 Router

          91
        • Positioning the and Cisco ASR 9922 Router and Cisco ASR 9912 Router

          91
          • Step 1 Install the two guide rails onto the bottom of the rack.

            91
          • Step 2 Use screws to fasten these two guide rails onto the front and rear rails of the rack.

            91
            • Figure 2-13 One 10-32 Screw with Bushings in Guide Rail Holes

              91
          • Step 3 Remove the shipping carton, plastic covering, rear brackets, attachment screws and bolts, shipping rack bar, and any cosmetic accessories included with the chassis.

            91
          • Step 4 Use a scissors jack to remove the chassis from the shipping rack. Place a pallet jack next to the chassis inside the shipping rack and push/pull the chassis onto the pallet jack for transport to the rack.

            92
          • Step 5 On the rear of the chassis is an integrated handle which is used to pull the chassis from the pallet jack into the rack where the chassis is to be installed. Position the chassis so that the rear handle is facing the front of the rack.

            92
          • Step 6 From the rear of the rack, pull the chassis by the handle into the rack, making sure that the chassis sits on top of the guide rails in the rack.

            92
          • Step 7 Once the chassis is pulled into the rack and sits on top of the guide rails, use screws to fasten the chassis to the rack.

            92
    • Removing Components Before Installing the Chassis

      92
      • Removing Power Modules

        92
      • Removing Fan Trays

        92
        • Removing a Fan Tray from the Cisco ASR 9010 Router, Cisco ASR 9922 Router, and Cisco ASR 9912 Router

          92
          • Step 1 Loosen the captive screw on each side of the fan tray.

            93
          • Step 2 Using the handle on the front panel, pull the fan tray halfway out of the chassis.

            93
          • Step 3 Slide out the fan tray completely from the chassis while supporting it with your other hand.

            93
            • Figure 2-14 Removing or Installing the Fan Tray on the Cisco ASR 9010 Router Chassis

              93
            • Figure 2-15 Removing or Installing the Fan Tray on the Cisco ASR 9922 Router Chassis

              94
            • Figure 2-16 Removing or Installing the Fan Tray on the Cisco ASR 9912 Router Chassis

              94
        • Removing a Fan Tray from the Cisco ASR 9006 Router

          95
          • Step 1 Loosen the captive screw that secures the fan tray door to the chassis and open the door.

            95
          • Step 2 Loosen the captive installation screw on the front of the fan tray you want to remove.

            95
          • Step 3 Using the handle on the front panel, pull the fan tray halfway out of the chassis.

            95
          • Step 4 Slide out the fan tray completely from the chassis while supporting it with your other hand.

            95
            • Figure 2-17 Removing or Installing the Fan Tray on the Cisco ASR 9006 Router Chassis

              95
        • Removing a Fan Tray from the Cisco ASR 9904 Router

          96
          • Step 1 Loosen the three captive installation screws on the front of the fan tray.

            96
          • Step 2 Using the handle on the front panel, pull the fan tray halfway out of the chassis.

            96
          • Step 3 Wait a few seconds for all the fans to stop rotating before lifting the fan tray from the chassis.

            96
          • Step 4 Slide out the fan tray completely from the chassis while supporting it with your other hand.

            96
            • Figure 2-18 Removing or Installing the Fan Tray on the Cisco ASR 9904 Router Chassis

              96
      • Removing Cards from the Chassis

        97
        • Removing RSP Cards and Line Cards from the Cisco ASR 9010 Router, Cisco ASR 9006 Router, and Cisco ASR 9904 Router

          97
          • Table 2-1 Router Components and Slot Numbering for the Cisco ASR 9010 Router, Cisco ASR 9006 Router, and Cisco ASR 9904 Router

            98
            • Figure 2-19 Cisco ASR 9010 Router Components and Slot Numbering with Version 1 Power System or Version 3 AC Power System

              99
            • Figure 2-20 Cisco ASR 9010 Router Components and Slot Numbering with Version 2 Power System or Version 3 DC Power System

              100
            • Figure 2-21 Cisco ASR 9006 Router Components and Slot Numbering with Version 1 Power System

              100
            • Figure 2-22 Cisco ASR 9006 Router Components and Slot Numbering with Version 2 Power System

              101
            • Figure 2-23 Cisco ASR 9904 Router Components and Slot Numbering with Version 2 Power System

              101
          • Step 1 Use Figure 2-24, Figure 2-25, or Figure 2-26 to identify each card and write down the card type and slot number on a piece of paper. You will need this information when you reinstall the cards in the chassis to be sure you reinstall each card ...

            102
          • Step 2 To remove a card starting at the lowest numbered slot:

            102
            • Figure 2-24 Removing a Line Card from the Cisco ASR 9010 Router Chassis

              102
            • Figure 2-25 Removing a Line Card from the Cisco ASR 9006 Router Chassis

              103
            • Figure 2-26 Removing a Line Card from the Cisco ASR 9904 Router Chassis

              104
          • Step 3 Repeat Step 2 for each RSP or line card.

            104
        • Removing RP Cards, Fabric Cards, and Line Cards from the Cisco ASR 9922 Router and Cisco ASR 9912 Router

          105
          • Table 2-2 Router Components and Slot Numbering for the Cisco ASR 9922 Router and Cisco ASR 9912 Router

            105
            • Figure 2-27 Cisco ASR 9922 Router Components and Slot Numbering with Version 2 DC Power System

              106
            • Figure 2-28 Cisco ASR 9922 Router Components and Slot Numbering with Version 3 DC Power System

              107
            • Figure 2-29 Cisco ASR 9922 Router Components and Slot Numbering with Version 2 AC Power System

              108
            • Figure 2-30 Cisco ASR 9922 Router Components and Slot Numbering with Version 3 AC Power System

              109
            • Figure 2-31 Cisco ASR 9912 Router Components and Slot Numbering with Version 2 DC Power System

              110
            • Figure 2-32 Cisco ASR 9912 Router Components and Slot Numbering with Version 3 AC Power System

              111
          • Step 1 Use Figure 2-27 or Figure 2-31 to identify each card and then write down the card type and slot number on a piece of paper. You will need this information when you reinstall the cards in the chassis to be sure you reinstall each card in its or...

            111
          • Step 2 To remove a FC card (Figure 2-33 or Figure 2-34), starting at the lowest numbered slot:

            111
            • Figure 2-33 Removing a Switch Fabric Card from the Cisco ASR 9922 Router Chassis

              112
            • Figure 2-34 Removing a Switch Fabric Card from the Cisco ASR 9912 Router Chassis

              113
          • Step 3 To remove a RP or line card (Figure 2-35 or Figure 2-36), starting at the lowest numbered slot:

            113
            • Figure 2-35 Removing a Line Card from the Cisco ASR 9922 Router Top Card Cage

              114
            • Figure 2-36 Removing a Line Card from the Cisco ASR 9912 Router Top Card Cage

              115
          • Step 4 Repeat Step 2 or Step 3 for each FC, LC, and RP card.

            115
    • Rack-Mounting the Router Chassis

      116
      • Verifying Rack Dimensions

        116
        • Step 1 Mark and measure the distance between two holes on the left and right mounting rails.

          116
        • Step 2 Measure the space between the inner edges of the left front and right front mounting flanges on the equipment rack.

          116
          • Figure 2-37 Verifying Equipment Rack Dimensions

            116
      • Installing the Chassis in a 2-Post Rack

        117
        • Figure 2-38 Installing the Cisco ASR 9010 Router Chassis in a Standard 2-Post Rack

          117
        • Figure 2-39 Installing the Cisco ASR 9010 Router Chassis in a Seismic 2-Post Rack

          118
        • Figure 2-40 Installing the Cisco ASR 9006 Router Chassis in a Standard 2-Post Rack

          119
        • Figure 2-41 Installing the Cisco ASR 9904 Router Chassis in a Standard 2-Post Rack

          120
        • Step 1 Using two people, lift the chassis into the rack using the side handles and grasping underneath the power supply bays (Figure 2-42).

          121
          • Figure 2-42 Correct Lifting Positions

            121
          • Figure 2-43 Incorrect Lifting Handholds

            122
        • Step 2 Position the chassis until the rack-mounting flanges are flush against the mounting rails on the rack.

          122
        • Step 3 Hold the chassis in position against the mounting rails while the second person finger-tightens a screw to the rack rails on each side of the chassis.

          122
        • Step 4 Finger-tighten the screws to the rack rails on each side of the chassis. Space the screws evenly between the top and bottom of the chassis.

          122
        • Step 5 (Optional) For optional earthquake protection for the Cisco ASR 9010 Router or Cisco ASR 9006 Router, two side brackets must be mounted to the chassis for attachment to the posts (5” channel width) of a GR-63 Zone 4 Seismic 2-post rack (Figu...

          122
        • Step 6 Fully tighten all five screws on the chassis mounting flanges on each side to secure the chassis to the rack rails.

          122
      • Installing the Chassis in a 4-post Open Rack

        123
        • Preparing the 19 Inch 45-RU Rack

          123
          • Step 1 Install the two guide rails into the bottom of the rack (Figure 2-47).

            123
          • Step 2 Use a scissors jack to remove the chassis from the shipping rack. Place a pallet jack next to the chassis inside the shipping rack and push/pull the chassis onto the pallet jack for transport to the rack.

            123
          • Step 3 On the rear of the Cisco ASR 9922 Router is an integrated handle that is used to pull the chassis from the pallet jack into the rack where the chassis is to be installed.

            123
          • Step 4 On the Cisco ASR 9912 Router, the handles are on the sides of the chassis. Once the chassis is pulled into the rack and sits on top of the guide rails, use screws to fasten the chassis to the rack.

            123
          • Figure 2-44 Installing the Cisco ASR 9010 Router Chassis in a 4-Post Rack

            124
            • Figure 2-45 Installing the Cisco ASR 9006 Router Chassis in a 4-Post Rack

              125
            • Figure 2-46 Installing the Cisco ASR 9904 Router Chassis in a 4-Post Rack

              126
            • Figure 2-47 Rack Mount Installation Kit for the Cisco ASR 9922 Router and Cisco ASR 9912 Router

              127
            • Figure 2-48 Installing the Cisco ASR 9922 Router Chassis in a 4-Post Rack

              128
            • Figure 2-49 Installing the Cisco ASR 9912 Router Chassis in a 4-Post Rack

              129
    • Supplemental Bonding and Grounding Connections

      130
      • Table 2-3 Grounding Receptacle Locations

        130
      • Step 1 Insert the grounding screws (10-32 round-head) through the locking washers (ideally nickel-plated brass) and into the threaded grounding receptacle (has two M6 bolt holes with 0.625 to 0.75 spacing between them). The wire receptacle is large e...

        130
      • Step 2 Tighten the grounding screws securely to the receptacles.

        130
      • Step 3 Prepare the other end of the grounding wire and connect it to the appropriate grounding point at your site to ensure an adequate earth ground.

        130
        • Figure 2-50 NEBS Bonding and Grounding for the Cisco ASR 9010 Router

          131
        • Figure 2-51 NEBS Bonding and Grounding for the Cisco ASR 9006 Router

          131
        • Figure 2-52 NEBS Bonding and Grounding for the Cisco ASR 9904 Router

          132
        • Figure 2-53 NEBS Bonding and Grounding for the Cisco ASR 9922 Router

          133
        • Figure 2-54 NEBS Bonding and Grounding for the Cisco ASR 9912 Router

          134
    • Installing Chassis Accessories

      135
      • Base Accessories

        135
      • Optional Accessories

        135
        • Installing Base Chassis Accessories on the Cisco ASR 9010 Router

          135
          • Step 1 Install two ball studs (one per side) into the chassis front edge (Figure 2-55) near the top of the chassis grill. Tighten the ball studs to a torque of 8 in-lb (0.90 N-m).

            135
            • Figure 2-55 Installing Ball Studs: Version 1 Power Cisco ASR 9010 Router (Base Accessories Installation)

              136
          • Step 2 Attach two plastic strips (one per side) along the chassis front edge. The bottom tab of each strip attaches to the hole about 2 inches above the ball stud locations (Figure 2-56).

            136
          • Step 3 Attach the accessory grill to the chassis in front of the chassis grill. The top of the accessory grill attaches to the ball studs.

            136
            • Figure 2-56 Installing Base Chassis Accessories on the Cisco ASR 9010 Router

              137
      • Installing Optional Chassis Accessories on the Cisco ASR 9010 Router

        138
        • Step 1 Attach the left L-shaped bracket (item 3 in Figure 2-57) to the left hinge bracket (item 2 in Figure 2-57) with two screws. Tighten the screws to a torque of 5 in-lb (0.55 N-m).

          138
        • Step 2 Repeat Step 1 for the right hinge bracket and right L-shaped bracket.

          138
        • Step 3 Remove the two screws that secure the bottom edge of the cable management tray to the chassis.

          138
        • Step 4 Install six ball studs (three per side) into the chassis front edge (item 7 in Figure 2-57 and Figure 2-58). Tighten the ball studs to a torque of 8 in-lb (0.90 N-m).

          138
          • Figure 2-57 Optional Chassis Accessories for the Cisco ASR 9010 Router

            139
          • Figure 2-58 Locations for the Six Ball Studs on the Cisco ASR 9010 Router

            140
        • Step 5 Attach the left and right hinge brackets to the chassis using four screws for each bracket. Tighten the screws to a torque of 11 in-lb (1.20 N-m). The L-shaped brackets should align with the holes in the cable management tray from which you re...

          140
        • Step 6 Secure the L-shaped brackets to the chassis and cable management tray by re-inserting and tightening the cable management tray screws you removed (Figure 2-59).

          140
          • Figure 2-59 Installing the Hinge Brackets and L-Shaped Brackets on the Cisco ASR 9010 Router

            141
        • Step 7 Install the mid-cover with door lock (item 6 in Figure 2-57) by engaging it to the upper four ball studs and lining up the grooves in the top outside edges of the mid-cover with ridges at the bottom of the hinge brackets.

          141
        • Step 8 Attach two doors to the hinge brackets (one per side). For each door:

          141
          • Figure 2-60 Installing Optional Chassis Accessory Doors on the Cisco ASR 9010 Router

            142
        • Step 9 Install the front grill (item 8 in Figure 2-57) by aligning and engaging it to the bottom two ball studs and pressing it in.

          142
      • Installing Base Chassis Accessories on the Cisco ASR 9006 Router

        143
        • Step 1 Attach the plastic accessory piece to the fan tray door using two supplied screws. Insert the screws through the fan tray door from the inside of the door into the accessory piece (Figure 2-61).

          143
        • Step 2 Attach the left metal mounting bracket to the front upper left corner of the chassis with three screws.

          143
        • Figure 2-61 Installing Plastic Fan Tray Door Accessory and Metal Mounting Brackets on the Cisco ASR 9006 Router

          144
          • Step 3 Attach the right metal mounting bracket to the front upper right corner of the chassis with three screws.

            144
          • Step 4 Attach the left and right side brackets to the chassis front edge on each side (Figure 2-62). Attach each bracket to the chassis using three screws per bracket inserted from the inside of the chassis, through the three chassis tabs into the pl...

            144
            • Figure 2-62 Installing Chassis Side Brackets on the Cisco ASR 9010 Router

              145
          • Step 5 Attach the left plastic corner piece to the mounting bracket at the front upper left corner of the chassis (Figure 2-63).

            145
          • Step 6 Attach the right plastic corner piece to the mounting bracket at the front upper right corner of the chassis.

            145
            • Figure 2-63 Installing Plastic Chassis Corners on the Cisco ASR 9006 Router (Base Accessories Installation)

              146
        • Installing Optional Chassis Accessories on the Cisco ASR 9006 Router

          146
          • Step 1 Perform Step 1 through Step 4 of the Installing Base Chassis Accessories on the Cisco ASR 9006 Router, page 2-69.

            147
          • Step 2 Assemble and attach the two ball stud assemblies (Figure 2-64) to each chassis side bracket. For each assembly:

            147
            • Figure 2-64 Installing Ball Stud Assemblies on the Cisco ASR 9006 Router (Shown with Version 1 Power System)

              147
          • Step 3 Attach the door to the upper chassis panel (Figure 2-65) using two hex nuts per side to secure the door hinges to the panel. Tighten the hex nuts to a torque of 4 in-lb (0.45 N-m).

            147
            • Figure 2-65 Installing the Optional Accessory Door on the Cisco ASR 9006 Router

              148
          • Step 4 Attach the left plastic corner piece to the mounting bracket at the front upper left corner of the chassis (Figure 2-66).

            148
          • Step 5 Attach the right plastic corner piece to the mounting bracket at the front upper right corner of the chassis.

            148
            • Figure 2-66 Installing Plastic Chassis Corners on the Cisco ASR 9006 Router (Optional Accessories Installation)

              149
        • Installing Optional Air Baffles on the Cisco ASR 9006 Router

          149
          • Step 1 Attach the support bracket (part number: 800-43857-01) to the left side of the Cisco ASR 9006 Router using six 12-24 x 0.5 in. pan-head screws (part number: 48-0523-01). See Figure 2-67.

            150
            • Figure 2-67 Attaching the Support Bracket to the Left Side of the Cisco ASR 9006 Router Chassis

              150
          • Step 2 Remove the paper liner from the plastic guide strip and install on the right side of the chassis card cage, as shown in Figure 2-68.

            151
            • Figure 2-68 Attaching Plastic Glide Strip to Chassis

              151
          • Step 3 Install the plenum in the rack. Insert and tighten four customer-supplied screws to secure the plenum to the front of the rack-post (two on each side). These screws can vary in size and type depending on the rack that you use. Torque the screw...

            152
          • Figure 2-69 Plenum with Pre-Installed Front Mounting Brackets

            152
            • Step 4 Attach the rear rack-mounting brackets (part number: 700-47414-01) to the left and right sides of the plenum base, using twelve 8-32 x 0.5 in. pan-head screws ((part number: 48-0828-01), six per bracket.

              152
            • Step 5 Insert and tighten four customer-supplied screws to secure the plenum to the rear of the rack-post (two on each side). These screws can vary in size and type depending on the rack that you use. Torque the screws to the weight specified for you...

              152
              • Figure 2-70 Installing the Plenum in a Two-Post 19-Inch Rack

                153
            • Step 6 Turn the chassis sideways and slide it into the rack (Figure 2-71).

              153
            • Step 7 Insert and tighten four customer-supplied rack-mounting screws to secure the support bracket on the chassis to the front of the rack-post (two on each side). These screws can vary in size and type depending on the rack that you use. Torque the...

              153
            • Step 8 Insert six 12-24 x 0.5 in.pan-head screws (part number: 48-0523-01) screws to secure the chassis to the rack-mounted plenum (Figure 2-71).

              154
              • Figure 2-71 Securing the ASR 9006 Router in a Two-Post 19-Inch Rack

                154
            • Step 9 Install the optional chassis accessories, if desired. See Installing Optional Chassis Accessories on the Cisco ASR 9006 Router, page 2-72.

              154
              • Figure 2-72 Cisco ASR 9006 Router Fully Installed with Air Baffle Accessory Kit and Optional Chassis Accessories

                155
        • Installing Optional Air Baffles on the Cisco ASR 9904 Router

          156
          • Step 1 Attach the adapter plates (Figure 2-73) to the left and right rack rails using customer-supplied rack screws (we recommend a minimum of ten per side). These screws can vary in size and type depending on the rack that you use. Torque the screws...

            156
            • Figure 2-73 Attaching the Adapter Plates to the Left and Right Rack Rails on the Cisco ASR 9904 Router Chassis

              156
          • Step 2 Loosely attach the left and right side air baffles to the adapter plate (Figure 2-74) with 12-24 screws (four per side). Do not tighten these screws. To ensure the correct orientation, “Left Front” and “Right Front” are stamped on each...

            157
            • Figure 2-74 Installing the Air Baffles on the Cisco ASR 9904 Router Chassis

              157
          • Step 3 Install the top and bottom air deflectors (Figure 2-75) with the “bottom side” stamp facing down (note that the top and bottom air deflectors both have the same part number: 800-41357-01).

            158
          • Step 4 Tighten the screws to a torque of 41 in-lb.

            158
            • Figure 2-75 Attaching the Air Deflectors on the Cisco ASR 9904 Router Chassis —Top View

              158
          • Step 5 Secure the side air baffles to the air deflectors using the supplied 8-32 screws (Figure 2-76). Do not tighten the screws.

            159
            • Figure 2-76 Securing the Cisco ASR 9904 Router Chassis Side Baffles to the Air Deflectors (Rear View)

              159
          • Step 6 Use six 12-24 screws to fasten each side of the chassis to the 23-inch rack. Torque each of the six screws to 41 in-lbs. (Figure 2-77).

            160
            • Figure 2-77 Mounting the Cisco ASR 9904 Router Chassis in a 23-Inch Rack

              160
          • Step 7 Tighten the remaining loose screws to complete the installation. Torque the 8-32 screws to 18 in-lb and the 12-24 screws to 41 in-lb.

            161
            • Figure 2-78 Cisco ASR 9904 Router Chassis with Air Baffle in 2-Post 23-Inch Rack

              161
            • Figure 2-79 Cisco ASR 9904 Router Baffle Ground

              162
            • Figure 2-80 Cisco ASR 9904 Router Air Baffle Dimensions—Top View

              163
            • Figure 2-81 Cisco ASR 9904 Router Air Baffle Dimensions—Front View

              164
        • Installing Optional Chassis Accessories on the Cisco ASR 9922 Router

          165
          • Step 1 Remove the two screws that secure the bottom edge of the cable management tray to the chassis.

            165
            • Figure 2-82 Optional Fan Tray Covers for the Cisco ASR 9922 Router

              165
            • Figure 2-83 Optional Card Cage Doors for the Cisco ASR 9922 Router

              166
          • Step 2 Attach the left and right hinge brackets to the chassis using three screws (M4 thread) for each bracket. Tighten the screws to a torque of 11 in-lb (1.20 N-m). The L-shaped brackets should align with the holes in the cable management tray from...

            166
          • Step 3 Secure the L-shaped brackets to the chassis and cable management tray by re-inserting and tightening the cable management tray screws you removed.

            166
          • Step 4 Align the exhaust air deflector at the rear of the chassis behind the top fan tray outlets (Figure 2-84), and use a screwdriver to tighten the two screws, one on each side of the deflector. The deflector’s measurements are width 17.48” x h...

            166
            • Figure 2-84 Optional Rear Exhaust Air Deflector on the Cisco ASR 9922 Router

              167
      • Installing Base Chassis Accessories on the Cisco ASR 9912 Router

        167
        • Step 1 Attach the honeycomb cosmetic cover to the front of the chassis above the cable management bracket by aligning the cover above the screw tabs on the chassis.

          167
        • Step 2 Attach the vented bezel cover by snapping it into place in front of the power system.

          167
          • Figure 2-85 Installing Base Accessories on the Cisco ASR 9912 Router

            168
        • Installing Optional Chassis Accessories on the Cisco ASR 9912 Router

          169
          • Step 1 Attach the left (if not pre-installed) and right hinge brackets to the chassis using three screws (M4 thread) for each bracket (Figure 2-86). Tighten the screws to a torque of 11 in-lb (1.20 N-m).

            169
            • Figure 2-86 Optional Card Cage Door on the Front of the Cisco ASR 9912 Router

              169
          • Step 2 Align the exhaust air deflector at the top rear of the chassis above the fan trays (Figure 2-87), and use a screwdriver to tighten the two screws, one on each side of the deflector.

            170
            • Figure 2-87 Optional Rear Exhaust Air Deflector on the Cisco ASR 9912 Router

              170
  • Installing Cards and Modules in the Chassis

    171
    • Installing Power Modules

      171
    • Installing AC Power Modules

      172
    • Prerequisites

      172
    • Required Tools and Equipment

      172
    • Steps

      172
    • Installing DC Power Modules

      174
    • Required Tools and Equipment

      174
    • Steps

      174
    • Installing Fan Trays

      174
    • Prerequisites

      174
    • Required Tools and Equipment

      174
    • Steps

      174
    • Installing Cards in the Chassis

      176
    • Installing RSP Cards in the Chassis

      177
    • RSP Cable Management Ties

      179
    • Installing RP Cards in the Chassis

      180
    • Installing Fabric Cards in the Chassis

      181
    • Installing Line Cards in the Chassis

      181
    • Connecting Line Card Network Interface Cables

      187
    • Connecting Cables to the RSP or RP

      192
    • Connecting to the Console Port

      194
    • Connecting to the Auxiliary Port

      194
    • Connecting to the Ethernet Management Ports

      194
    • Connecting the Alarm Cable

      195
    • Connecting Power to the Router

      196
    • Connecting Power to an AC-Powered Router

      196
    • Connecting Power to a DC-Powered Router

      198
    • Powering On the Router

      202
  • Troubleshooting the Installation

    203
    • Troubleshooting Overview

      203
    • Troubleshooting Using a Subsystem Approach

      204
    • Normal Router Startup Sequence

      205
    • Identifying Startup Issues

      206
    • Troubleshooting the Power Subsystem

      209
    • Troubleshooting the AC Input Power Subsystem

      209
    • Troubleshooting the DC Input Power Subsystem

      214
    • Troubleshooting a DC Power Module

      215
    • Additional Power Subsystem Troubleshooting Information

      216
    • Obtaining Temperature and Environmental Information

      216
    • Troubleshooting the Power Distribution System

      220
    • Troubleshooting the Route Processor Subsystem

      221
    • Route Processor Overview

      221
    • RSP and RP Front Panel Indicators

      227
    • LED Display Definitions

      227
    • Compact Flash and Status LEDs

      229
    • Ethernet Ports and Status LEDs

      229
    • Auxiliary and Console Ports

      230
    • Alphanumeric Message Displays

      230
    • Flash Memory

      231
    • Troubleshooting RSP and RP Cards

      231
    • Fabric Card Front Panel Indicator

      233
    • Troubleshooting Line Cards and Modular Port Adapters

      233
    • Monitoring Critical, Major, and Minor Alarm Status

      234
    • Troubleshooting the Cooling Subsystem

      234
    • Chassis Cooling Requirements

      234
    • Fan Tray Operation

      235
    • Power Module Fans

      236
    • Overtemperature Conditions

      236
    • Isolating Cooling Subsystem Problems

      237
  • Replacing Cisco ASR 9000 Series Router Components

    239
    • Prerequisites and Preparation

      239
    • Field Replaceable Units

      240
    • Online Insertion and Removal

      240
    • OIR Monitoring

      241
    • Powering Off the Router

      242
    • Replacing the Chassis Air Filter

      242
    • Removing and Replacing the Fan Trays

      249
    • Prerequisites

      249
    • Required Tools and Equipment

      249
    • Steps

      249
    • Removing and Replacing Power System Components

      250
    • Changing Between Version 1, Version 2, Version 3, AC, and DC Power Modules

      251
    • Removing a Version 1 AC or DC Power Module

      252
    • Removing a Version 2 or Version 3 AC or DC Power Module

      253
    • Installing a Version 1 AC or DC Power Module

      254
    • Installing a Version 2 or Version 3 AC or DC Power Module

      254
    • Disconnecting AC Power

      255
    • Reconnecting AC Power

      255
    • Disconnecting DC Power

      257
    • Reconnecting DC Power

      258
    • Removing an AC or DC Power Tray from a Cisco ASR 9000 Series Router

      259
    • Installing an AC or DC Power Tray into a Cisco ASR 9000 Series Router

      261
    • Removing and Replacing Cards from the Chassis

      263
    • Removing Cards from the Chassis

      264
    • Replacing Cards in the Chassis

      264
    • Removing a Chassis from the Equipment Rack

      265
    • Installing a Replacement Chassis in the Equipment Rack

      266
    • Packing a Chassis for Shipment

      266
• Technical Specifications

  267
  • Cisco ASR 9000 Series Routers Physical Descriptions

    268
  • Cisco ASR 9000 Series Routers Environmental Specifications

    269
  • Cisco ASR 9000 Series Routers AC Electrical Specifications

    270
  • Cisco ASR 9000 Series Routers DC Electrical Specifications

    272
  • AC Input and DC Input Voltage Range

    273
    • AC Input Voltage Range

      273
    • DC Input Voltage Range

      273
  • Power System DC Output Levels

    274
    • DC Output Levels for Version 1 Power System

      274
    • DC Output Levels for Version 2 Power System

      274
    • DC Output Levels for Version 3 Power System

      275
  • RSP/RP Port Specifications.

    275
  • RSP Cards, RP Cards, and Fabric Card Power Consumption Specifications

    276
  • Fan Tray Power Consumption Specifications

    278
  • Site Log

    281