Benutzerhandbuch für Cisco Systems Gateway 10

Inhaltsverzeichnis

• 1 Overview

  2
  • Cisco RF Gateway 10 Components

    2
• 2 Site Preparation

  4
• 3 Chassis Installation

  5
  • Installation Methods

    5
  • General Rack Installation Guidelines

    5
  • Rack-mounting a Cisco RFGW-10 UEQAM

    6
    • Verifying Rack Dimensions

      6
  • Installing the Chassis Installation Brackets

    7
  • Installing the Chassis Installation Handles

    8
  • Attaching the Chassis Rack-mount Brackets

    9
    • Chassis Front Rack-mount Brackets Installation

      9
    • Chassis Mid-Mounted Rack-Mount Bracket Installation

      10
  • Installing the Cisco RFGW-10 UEQAM in a Rack

    11
    • Two-Post Rack Installation Mid-Mounted

      15
  • Connecting the Chassis to Ground

    17
  • Recommended Tools and Supplies

    18
• 4 Connecting Cables

  19
  • Power and Ground Connections

    19
  • Connect the Console and Management Ports

    19
    • Console Port

      19
    • Management Port

      20
  • Cabling the Cisco RFGW-10 UEQAM

    20
  • Part Numbers

    21
  • Nominal Attenuation

    22
  • Installing the UCH on the Cisco RFGW-10 UEQAM RF Switch Card

    23
  • Installing or Replacing the Cables in the UCH2

    24
    • Tools and Equipment

      25
    • Installing Cables

      25
  • Troubleshooting the RF Switch Card Installation

    27
  • Connecting the DTI Connections

    27
• 5 Powering on the Cisco RF Gateway 10

  28
  • Verifying External DC Power Source Connections

    28
  • Verifying Basic System Power

    28
• 6 Configuring the Cisco RF Gateway 10 at Startup

  30
  • Entering the Initial Configuration Information

    30
  • Basic Configuration Using the Setup Facility

    30
  • System Configuration Dialog

    30
    • Configuring the System Using the System Configuration Dialog

      30
  • Using Configuration Mode to Configure Your Switch

    31
  • Configuring a Default Gateway

    31
  • Configuring a Static Route

    32
  • Controlling Access to Privileged EXEC Commands

    32
    • Setting or Changing a Static Enable Password

      32
    • Using the enable password and enable secret Commands

      32
    • Setting or Changing a Privileged Password

      33
  • Configuring FastEthernet1 Port

    33
• 7 Troubleshooting

  34
  • Before You Call for Technical Assistance

    34
  • Verifying Normal Startup Sequence

    34
• 8 Obtaining Documentation and Submitting a Service Request

  35
• 9 Related Documents

  36