Benutzerhandbuch für Datacard Group CP60

Inhaltsverzeichnis

• About the printer

  6
  • The outside of the printer

    6
  • The inside of the printer

    8
  • Features and options

    8
• Loading cards

  10
• Loading print ribbon

  12
• Power on the printer

  14
• The LCD panel

  15
• Make a printer test card

  18
• Data formats for the CP60 Card Printer

  20
  • CP Driver data

    21
  • Open Card data format

    22
  • Data formats summary

    24
• Printer Installation

  26
  • Site requirements

    27
    • Operating environment

      27
    • Electrical requirements

      27
    • Physical requirements

      27
• Useful tools

  28
• Network installation

  30
  • Prepare the printer for installation

    31
  • Connect the printer to the network

    32
    • Use the Ethernet port

      32
    • Use the USB port and a wired print server

      33
    • Use the USB port and a wireless print server

      34
  • Set up the network printer

    35
    • Set the Data Format

      39
  • Set up for your card design

    40
    • Set up for CP Driver

      40
    • Set up for the Open Card data format

      40
  • SNMP Support

    41
• Print a card

  42
  • From the CP Driver

    42
  • Using the Open Card data format

    43
• Cleaning the printer

  44
  • Cleaning the printer rollers

    46
• Getting the most out of your printer

  48
• Printer LCD settings

  50
  • LCD menu system

    51
  • View status settings

    52
    • View the Serial Number

      52
    • View the Firmware Revision

      53
    • View Card Counts

      54
    • View the Data Format

      55
    • View the Network Address Mode, IP Addresses, and MAC Address

      56
  • Change settings

    58
    • Set LCD Backlighting

      58
    • Set the Data Format

      59
    • Set the Address Mode

      60
    • Set the IP Address, Subnet Mask, and Gateway Address

      62
    • Set the K Power

      64
• Troubleshooting

  66
• Printer supplies

  68
  • Color print ribbon

    68
  • Monochrome and Topcoat ribbon

    68
  • Monochrome print ribbon

    68
  • Cleaning supplies

    69
• Printer messages

  70
  • DM-00760 Duplex Error

    71
  • The duplex mechanism did not reach the correct position.

    71
  • DM-00762 Duplex Jam

    72
  • The card is stuck in the duplex module.

    72
  • DM-00765 No Duplex

    73
  • The duplex module is not installed or detected.

    73
  • DM-00767 Duplex Jam

    74
  • The card is lost in the duplex module.

    74
  • IS-01206 No Card Picked

    75
  • A card was not picked successfully.

    75
  • SY-01305 Data Error

    76
  • The setting sent to the printer does not match printer features.

    76
  • SY-01306 Data Error

    77
  • The setting value you selected is not valid.

    77
  • SY-01310 Flash Error

    78
  • EEPROM flash data error.

    78
  • SY-01312 Flash error

    79
  • EEPROM flash size error.

    79
  • SY-01314 Flash Error

    80
  • Warning! EEPROM flash write error.

    80
  • SY-01317 Memory Error

    81
  • Memory error.

    81
  • SY-01325 Data Error

    82
  • The options, ribbon, or supply materials installed do not match settings or card data.

    82
  • SY-01327 Data Error

    84
  • The request sent to the printer is not supported.

    84
  • SY-01331 Comm Error

    85
  • Data transmission error.

    85
  • SY-01332 Hardware Error

    86
  • General printer fault.

    86
  • MS-01401, MS-01402, MS-01403 Mag Stripe Data

    87
  • Data sent does not match requirements for track 1.

    87
  • MS-01404, MS-01405, MS-01406 Mag Stripe Error

    88
  • Parity error reading data on track 1, 2 or 3.

    88
  • MS-01407, MS-01408, or MS-01409 Mag Stripe Error

    89
  • LRC error reading data on track 1, 2, or 3.

    89
  • MS-01410, MS-01411, or MS-01412 Mag Stripe Error

    90
  • Start Sentinel error reading data on track 1, 2, or 3.

    90
  • MS-01413, MS-01414, or MS-01415 Mag Stripe Error

    91
  • End Sentinel error reading data on track 1, 2, or 3.

    91
  • MS-01417, MS-01418, MS-01419, MS-01420, MS-01421 Card Jam

    92
  • A card was stuck when attempting to read or write magnetic stripe data on the card.

    92
  • MS-01424 Mag Stripe Error

    94
  • Unable to read any data from the card.

    94
  • MS-01425 Mag Stripe Error

    96
  • Unexpected magnetic stripe coercivity value.

    96
  • MS-01426 EEPROM Error

    97
  • Magnetic stripe module settings EEPROM read or write error.

    97
  • MS-01427 or MS-01428 Mag Stripe Error

    98
  • Configuration information passed through by the printer driver was not accepted by the magnetic stripe module.

    98
  • MS-01429 Mag Stripe Data

    99
  • Data sent to a track does not match the requirements for that track.

    99
  • MS-01430 Mag Stripe Error

    100
  • Control information passed through by the printer driver was not accepted by the magnetic stripe module.

    100
  • MS-01435 No Mag Stripe

    101
  • The magnetic stripe module is not installed or detected.

    101
  • PR-01703 Printhead Error

    102
  • The printhead cam is not in the correct position to print.

    102
  • PR-01705, PR-01706 Card Jam

    104
  • The card is stuck or lost in the printer.

    104
  • PR-01710 EEPROM Error

    106
  • Factory settings read problem.

    106
  • PR-01715, PR-01716 Cover Open

    107
  • The cover was opened during printing.

    107
  • PR-01718 Printhead Temp

    108
  • The printhead temperature is too high.

    108
  • PR-01719 Printhead Error

    109
  • The printhead is not installed or detected.

    109
  • PR-01720 Ribbon Error

    110
  • The print ribbon index mark was not found.

    110
  • PR-01721 EEPROM Error

    111
  • Operational settings read error.

    111
  • PR-01723 Hardware Error

    112
  • General printer fault.

    112
  • PR-01724 Ribbon Break

    114
  • The print ribbon is broken.

    114
  • PR-01726 Ribbon Out

    116
  • Out of print ribbon.

    116
  • PR-01730 Printhead Error

    117
  • Unable to read the printhead temperature.

    117
  • PR-01737 Ribbon Low

    118
  • The print ribbon is low.

    118
  • PR-01738 Ribbon Error

    119
  • The printer cannot identify the ribbon installed.

    119
  • SC-01804 No Smart Card

    120
  • The smart card module is not installed or detected.

    120
• Safety and compliance (FCC)

  129
  • Regulatory compliance

    129
  • Liability statement

    131
  • Safety

    132
  • Acknowledgments

    133