BenutzerhandbuchInhaltsverzeichnisTable of Contents1About the Remote Control2Remote Control Signals: UHF or IR2Installing Batteries in the Remote Control31. Press down on the slot in the battery cover (on the back of the remote control) and slide the ...32. Insert the new batteries, making sure to match the plus (“+”) ends with the plus markings on t...33. Replace the battery cover by sliding the cover back up into place.3Remote Control Modes31. Set up the remote to control the device. See Controlling a Device on page15 for instructions.32. Use the remote control mode buttons, SAT (satellite receiver), TV, VCR (for a VCR or a DVD pla...3Using the Remote Control Buttons4SAT (Satellite Receiver) Mode4SAT Mode Button4AUX Mode Button4TV/Video Button4Menu Button4Power Button5Page Up and Page Down (Arrow) Buttons5Mute Button5Volume Button5Guide Button5Select Button5Up/Down/Left/Right (Arrow) Buttons6Recall Button6Information (Info) Button7View Button7Cancel Button7System Information (Sys Info) Button7Number Buttons8Pound Button8TV (Television) Mode8TV Mode Button9TV/Video Button9Power Button9Mute Button9Volume Button9Select Button9Up/Down (Arrow) Buttons10Recall Button10Number Buttons10VCR (VideoCassette Recorder) Mode10VCR Mode Button10Mute Button11Volume Button11Select Button11Up/Down/Left/Right (Arrow) Buttons11Number Buttons12AUX (Auxiliary) Mode for Cable TV Box12AUX Mode Button12Mute Button12Volume Button12Select Button13Up/Down (Arrow) Buttons13Recall Button13Number Buttons13Star Button13AUX (Auxiliary) Mode for Tuner or Amplifier13AUX Mode Button14Mute Button14Volume Button14Select Button14Up/Down (Arrow) Buttons14Star Button14Remote Control Procedures15Controlling a Device151. Turn ON the device you want the remote to control, using the device’s buttons or the remote co...152. Find the brand name of the device in the tables that start on page22. If the brand is not lis...153. Press and hold the mode button for the device that you want the remote to control, for about t...154. Use the number buttons to enter the code for the device. Note: For the AUX mode, you must ente...155. Press and release the Pound (#) button. If the code is valid, the mode button backlight blinks...156. Test if the code works for the device by pressing the Power button. If the code works, the dev...157. Turn the device back ON and try some other buttons to make sure they work. Sometimes, the Powe...158. If the code you entered does not work, repeat steps 3 through 7 using another code from the ta...169. If you have tried all of the codes listed for the device without success, or if you cannot fin...16Changing the Remote Control Address161. Display the Important System Information menu. Note the Remote Address shown on this menu.162. Press and hold the SAT mode button about three seconds, until all the mode button backlights c...163. Use the number buttons to enter a number from 1 to 15. The SAT mode button backlight will blin...164. Press the Pound (#) button. If the address you entered is valid for the remote control, the SA...175. Press the Record button. The Remote Address on the Important System Information menu should ma...176. To check the address, press and hold the SAT mode button for three seconds. Then, press the Po...177. Press the Select button.17Installing an Attenuator171. Remove the UHF antenna from the UHF Remote Antenna connection on the receiver back panel.172. Attach a 10 dB attenuator to the UHF Remote Antenna connection.173. Attach the UHF antenna to the attenuator.17Controlling Sound Volume18Receiver Volume Control181. Use the TV remote control to make sure that the TV sound volume is not turned down or muted. N...182. Press the Menu button.183. Select the System Setup option.184. Select the Volume Control option. Note: If the System Setup menu does not display this option,...185. Select the TV remote volume control or the DISH remote volume control option.186. Select the Save option.187. If you are setting up the remote control for the first time, see Controlling a Device on page...18TV or Amplifier Volume Control191. Press and hold the AUX mode button for three seconds, then release it.192. Press the Pound (#) button.193. Press the plus (+) side of the Volume button.194. Press the 0 number button.195. Press the Pound (#) button. The AUX mode button backlight blinks three times.191. Press and hold the TV mode button for three seconds, then release it.192. Press the Pound (#) button.193. Press the plus (+) side of the Volume button.194. Press the 0 number button.195. Press the Pound (#) button. The AUX mode button backlight blinks three times.19Doing the Device Code Scan201. Press and hold the mode button for the device, for about three seconds. When all the other mod...202. For AUX mode only, use the number buttons to enter a number as follows: 0 is for a second TV, ...203. Press the Power button.204. Press the Up or Down arrow button to set the remote to the next code. The Down arrow button sc...205. When the remote reaches the correct code, the device turns OFF. If this happens, press the Pou...206. Press the Power button to turn the device back ON.207. Try some other remote control buttons to make sure that you have the right code.20Finding the Device Codes211. Press and hold the mode button for the device, for about three seconds. When all the other mod...212. Press the Pound (#) button twice. The mode light flashes the number for each digit of the curr...21Device Codes22TVs22VCRs23Tuners/Amplifiers25Cable TV Boxes25Trouble-Shooting Table26Limited Warranty28Advance Exchange Program29If You Need Help301. Review this Guide.302. See the Trouble-Shooting Table on page26.303. Call the DISH NetworkSM Service Center at 1-800-333-DISH (3474). Have the date of purchase and...304. A Representative will assist you. He or she will try to troubleshoot any problem you may be ha...305. If the Representative finds that you should return the remote control, he or she will give you...306. You must package returned equipment properly. Follow the instructions that the Representative ...307. Write the RA number in large, clearly visible characters on the outside of the shipping box us...308. We will:30Größe: 1,9 MBSeiten: 32Language: EnglishHandbuch öffnen
