BenutzerhandbuchInhaltsverzeichnis1 Introduction102 Product Specifications113 Getting Started124 Overview of the Enfora Mini-MT134.1 LED Indicators154.2 Switches164.2.1 Push To Call (PTC)164.2.2 Set Geo-Fence164.2.3 User-Defined button164.2.4 Volume Buttons164.3 Interconnections174.3.1 USB Connection174.3.2 Headphone Jack174.3.3 Speaker184.3.4 Microphone184.3.5 SIM194.3.6 Battery195 Battery Removal / Insertion / Charging205.1 Removing the battery205.2 Inserting the battery205.3 Charging the battery206 SIM Card Insertion / Removal227 Mini-MT Configuration247.1 Dispatch Number247.2 SMS Destination247.3 Set Geo-Fence257.4 User-Defined button(s)257.4.1 User-definable Button “(”257.4.2 User-definable Button “>”257.5 Setting the Emergency Call number257.6 Dialing the Emergency Call Number268 PC Software Installation278.1 Mini-MT USB Composite Device – Driver288.2 Mini-MT USB to UART Device – Driver Installation328.3 Configuring the PC and Verifying Communications.358.3.1 Default Serial Parameters358.3.2 Determine which COM port to use358.4 Start HyperTerminal378.5 Demo Configuration to the Enfora Test Server408.5.1 Reset the modem to factory defaults408.5.2 Connecting the Mini-MT to the Enfora Test Server408.5.3 Configure the Modem to Access the GPRS network.418.5.4 Verify Registration Status428.5.5 Verify GPRS Activation428.5.6 Configure the modem to access the Enfora Server.438.5.7 Verifying Server connectivity.459 GPS Operation and Verification489.1 Verification of GPS Lock489.2 Verify GPS operation489.2.1 GPS Operation from Enfora Demo Server4910 Safety Information for Wireless Devices5010.1 RF Exposure5010.2 Scientific evidence on RF exposure5111 FCC Compliance Statement5312 Product Safety Instructions54Revision History55Größe: 805 KBSeiten: 55Language: EnglishHandbuch öffnen