Benutzerhandbuch für Epson P07303

Inhaltsverzeichnis

• 1. Features

  1
• 2. General Specification

  2
• 3 Unpacking and Checking the Parts

  3
• 4. Interface

  4
• 4.1 Specifications

  4
• 4.2 The communication flow

  4
• 4.3. Interface

  5
• 4.3.1 Stand alone VFD Pole Display

  5
• 5. Dip Switch and Software Setting

  7
• 5.1 Command type selection

  7
• 5.2 Baud rate selection

  7
• 5.3 Parity check selection

  7
• 5.4 Demo Mode selection

  7
• 5.5 International character set

  8
• 5.6 Self-test

  8
• 5.7. Software Status Setting

  9
• 5.7.1. Baud rate

  9
• 5.7.2 International character set

  9
• 5.7.3 Command type select

  10
• 5.7.4 Reset EEPROM

  11
• 5.7.5 Save data for demo display

  11
• 5.7.6 Run Demo message

  11
• 5.7.7 Set Communication parity

  12
• 5.7.8 Show VFD Firmware Version

  12
• 5.7.9 Save title data to EEPROM

  12
• 6. Command List Table

  13
• 7. Command

  15
• 7.1. POS7300 series command set

  15
• 7.2 CD5220 Standard Mode Command List

  16
• 7.3 UTC standard mode command list

  18
• 7.4 UTC enhanced mode command list

  19
• 7.5 AEDEX mode command list

  19
• 7.6 ADM787/788 mode command list

  20
• 7.7 DSP-800 mode command list

  20
• 7.8 EPSON ESC/POS command list-1

  21
• 8. Character Set

  23
• 8.1 International Character Sets

  23
• 8.2 USA, Standard Character Sets (20H – 7EH)

  23
• 8.3 Page 0 (PC437: USA, Standard Europe) (80H – FFH)

  24
• 8.4 Page 1 (Katakana) (80H – FFH)

  24
• 8.5 Page 2 (PC850: Mulitlingual) (80H – FFH)

  24
• 8.6 Page 3 (PC860: Portuguese) (80H – FFH)

  25
• 8.7 Page 4 (PC863: Canadian-French) (80H – FFH)

  25
• 8.8 Page 5 (PC865: Nordic) (80H – FFH)

  26
• 8.9 Page 6 (Slavonic) (80H – FFH)

  26
• 8.10 Page 7 (Russia) (80H – FFH)

  27
• 9.Command details

  28
• 9.1 Overwrite mode

  28
• 9.2 Vertical scroll mode

  28
• 9.3 Horizontal scroll mode

  28
• 9.4 Set the string display mode, and write string to display

  28
• 9.5 Upper line message scroll continuously

  28
• 9.7 Move cursor right

  28
• 9.8 Move cursor up

  29
• 9.9 Move cursor down

  29
• 9.10 Move cursor to home position

  29
• 9.11 Move cursor to left-most position

  29
• 9.12 Move cursor to right-most position

  29
• 9.13 Move cursor to bottom position

  29
• 9.14 Move cursor to specified position

  29
• 9.15 Initialize display

  29
• 9.16 Reset the window

  29
• 9.17 Clear display screen, and clear string mode

  30
• 9.18 Clear current line, and cancel string mode

  30
• 9.19 Brightness adjustment

  30
• 9.20 Set cursor ON or OFF

  30
• 9.21 Set user-defined characters

  30
• 9.22 Reset user defined character set

  30
• 9.23 Cancel user defined characters

  30
• 9.24 Store the user defined character into EEPROM

  30
• 9.25 Restore the user defined character from EEPROM

  30
• 9.26 Character font format

  31
• 10. Control code set

  31
• Appendix A: Display Module Dimension

  32