Benutzerhandbuch für Furuno FSV-35

Inhaltsverzeichnis

• SAFETY INSTRUCTIONS

  3
• SYSTEM CONFIGURATION

  5
• EQUIPMENT LISTS

  6
• 1. HOW TO INSTALL THE SYSTEM

  7
  • 1.1 Hull Unit

    7
    • 1.1.1 Installation considerations

      7
    • 1.1.2 Guideline for how to shorten the retraction tank

      9
    • 1.1.3 How to install the Hull Unit on the retraction tank

      10
  • 1.2 Processor Unit

    13
    • 1.2.1 Installation considerations

      13
    • 1.2.2 How to install the processor unit

      13
  • 1.3 Control Unit

    15
    • 1.3.1 Control Unit FSV-8501

      15
    • 1.3.2 Sub Control Unit FSV-853 (option)

      16
  • 1.4 Transceiver Unit

    17
  • 1.5 Transducer Cable Extension Kit

    18
  • 1.6 IF Unit

    19
  • 1.7 Grounding the Equipment

    19
  • 1.8 Attachment Flange (option)

    19
  • 1.9 Attachment Kit (option)

    20
• 2. WIRING

  23
  • 2.1 How to Use the Crimping Tool, Pin Extractor

    23
    • 2.1.1 How to use the crimping tool

      23
    • 2.1.2 How to use the pin extractor

      23
  • 2.2 How to Connect Units

    24
  • 2.3 Processor Unit

    25
  • 2.4 IF Unit

    28
  • 2.5 Control Unit and Remote Controller

    31
  • 2.6 Transceiver Unit

    33
    • 2.6.1 How to fabricate the 10P connector (CN-B102)

      33
    • 2.6.2 Connections inside the transceiver unit

      35
    • 2.6.3 Power cable

      35
  • 2.7 Transducer Cable Extension Kit

    36
  • 2.8 Control Box of Hull Unit

    37
  • 2.9 Input Voltage and Fuses

    38
• 3. ADJUSTMENTS AND CHECKS

  39
  • 3.1 Hull Unit Check

    39
  • 3.2 How to Adjust the Heading

    41
  • 3.3 How to Configure the Own Ship Mark

    42
  • 3.4 Other Menu

    43
    • 3.4.1 Interface Setting menu

      43
    • 3.4.2 EXT Data Setting menu

      44
    • 3.4.3 Others menu

      44
• APPENDIX 1 JIS CABLE GUIDE

  45
• PACKING LIST

  46
• OUTLINE DRAWING

  53
• INTERCONNECTION DIAGRAM

  66