BenutzerhandbuchInhaltsverzeichnisPAGE OPERATION9SAFETY RULES1Generator Control and Operation9INTRODUCTION1Operating Unit with Manual Transfer Switch9Read this Manual Thoroughly1Engine Start-up and Transfer9Operation and Maintenance1Retransfer and Shutdown9How to Obtain Service1Operating Unit with Automatic Transfer Switch9IDENTIFICATION RECORD2MAINTENANCE10Data Label2Service Facilities10EQUIPMENT DESCRIPTION3Cooling System10Equipment Description3Checking Fluid Levels10Engine Oil Requirements3Check Engine Oil10Coolant Recommendations3Battery Fluid10ENGINE PROTECTIVE DEVICES4Engine Coolant10High Coolant Temperature Switch4Maintenance Owner/Operator Can Perform10Low Coolant Level Sensor4Check Engine Oil Level10Low Oil Pressure Switch4Check Battery10Overcrank Shutdown4Exercise System10Overspeed Shutdown4Inspect Cooling System10RPM Sensor Loss Shutdown4Check Engine Coolant Level10DC Fuse4Perform Visual Inspection10FUEL SYSTEMS5Inspect Exhaust System10Fuel Requirements5Check Fan Belt10Natural Gas Fuel System5Inspect Engine Governor10Propane Vapor Withdrawal Fuel System5Changing Engine Oil10LP Fuel System5Changing the Engine Air Cleaner10SPECIFICATIONS6Spark Plugs10Generator6Coolant Change10Engine6Miscellaneous Maintenance10Cooling System6Cleaning the Generator10Fuel System6Battery10Electrical System6Battery Maintenance10Cold Weather Kit6Battery Replacement10GENERAL INFORMATION7SERVICE SCHEDULE11Generator AC Lead Connections7Four-lead, Single-phase Stator7Driven Generator Sets11Alternator Power Winding Connections7TROUBLESHOOTING123-phase Alternators7Troubleshooting Guide12INSTALLATION8Installation8Preparation Before Start-up8Prior to Initial Start-up8Initial Inspection for QT Genset Start-up8Start-up Inspection8Cylinders and Arrangement63% for every 10° C above °C251.65% for every 10° above °F771% for every 100 m above m1833% for every 1000 ft. above ft.600Größe: 4,28 MBSeiten: 56Language: EnglishHandbuch öffnen