Benutzerhandbuch für Husqvarna 15V2 AWD

Inhaltsverzeichnis

• Contents

  2
• Pre-delivery service

  3
• After the first 8 hours

  3
• Dear Customer,

  4
• Driving and transport on public roads

  4
• Towing

  4
• Use

  4
• Good service

  5
• Serial Number

  5
• Symbols

  6
• Safety instructions

  8
  • Insure your Rider

    8
  • General use

    8
• Driving on slopes

  9
  • This is what you do

    9
• Children

  10
• Maintenance

  10
• Transport

  11
• Presentation

  13
• Throttle control

  13
• Choke control

  13
• Speed limiter

  13
• Parking brake

  13
• Cutting unit

  13
• Lifting lever for the cutting unit

  14
• Cutting height adjustment lever

  14
• Seat

  14
• Fuelling

  14
• Before starting

  15
• Start the engine

  15
• Starting the engine with a weak battery

  16
  • Connecting the jump leads

    16
  • Remove the cables in the reverse order

    16
• Driving the Rider

  16
• Cutting tips

  17
• Stop the engine

  17
• Release lever

  18
  • Release lever Rider 15V2 AWD

    18
  • Release lever Rider 15V2

    18
• Maintenance schedule

  19
• Cleaning

  20
• Removing of the machine hoods

  20
  • Engine cover

    20
  • Front cover

    20
  • Right-hand fender

    20
  • Left-hand fender

    20
• Checking and adjusting the steering wires

  20
• Adjusting the parking brake Rider 15V2

  21
• Adjusting the parking brake Rider 15V2 AWD

  21
• Checking and adjusting of throttle wire

  21
• Checking and adjusting the choke wire

  22
• Replacement of fuel filter

  22
• Replacing the air filter

  22
• Checking the fuel pump’s air filter

  23
• Check the level of the battery acid

  23
• Ignition system

  23
  • Replacing the spark plug

    23
• Check the safety system

  24
• Main fuse

  25
• Checking the tyre pressure

  25
• Checking the engine’s cooling air intake

  25
• Fitting the cutting head

  25
• Removing the cutting unit

  26
• Checking and adjustment of the cutting unit’s ground pressure

  26
• Checking the cutting unit’s parallelism

  27
• Adjusting the parallelism of the cutting unit

  27
• Replacing the cutting unit belts

  27
• Service position for the cutting unit

  28
  • Placing in the service position

    28
  • Restoring from service position

    29
• Checking the blades

  29
• Removing the BioClip plug

  29
• Checking the engine’s oil level.

  30
  • Replacing the engine oil

    30
• Changing the oil filter

  30
• Checking the transmission oil level

  31
• Lubricating the belt adjuster

  31
• General lubrication

  31
• Winter storage

  33
• Guard

  33
• Service

  33
• EC-declaration of conformity (Applies to Europe only)

  35