Benutzerhandbuch für Intermec 6540

Inhaltsverzeichnis

• Introduction to the 6540 Terminal

  1
• Set Up

  2
• Unpacking

  2
• Powering on for the First Time

  2
• Mounting and Adjusting

  3
• Desktop Configuration without Mounting Bracket

  3
• Supplied Hardware

  3
• Protective Cable Cover Assembly

  3
• Supplied Hardware

  3
• Connecting to the Network

  4
• Wired Network Connection for the Terminal

  4
• ODI (Novell) Network Locate the network driver files in the following directories:

  4
• TCPIP Network

  4
• Wireless Proxim Connection for the Terminal

  4
• ODI (Novell) Network

  4
• TCPIP Network

  4
• Network Configuration

  4
• Token Ring Network Connection

  4
• ODI (Novell) Network

  4
• Configuration of the Token Card

  4
• TCPIP Network

  4
• Storing Programs and Data

  5
• Copying Files to the Terminal

  5
• BIOS Version 3.0 or Newer

  5
• BIOS Older than Version 3.0

  5
• Disk Drives

  5
• Solid State Disks–Models DFB and DSB

  5
• ROM Disk (Drive A:)

  5
• Flash Disk (Drive B:)

  5
• SRAM Disk–Model DSB Only (Drive C:)

  5
• Hard Drive–Model DHB (Drive C:)

  5
• Virtual Disk (D:)

  5
• CONFIG and AUTOEXEC Files

  5
• CONFIG.SYS

  5
• USERCONF.SYS

  5
• AUTOEXEC.BAT

  5
• USER.BAT

  5
• Mini ROM DOS

  5
• Full ROM DOS

  5
• Display and Keyboard

  6
• Principle of Operation

  6
• Configuring the Display

  6
• Writing to the Display

  6
• Simulating a Large Block Cursor

  6
• Writing Applications for the Display

  6
• Keyboard

  6
• Using an External Keyboard

  6
• Special Keyboard Versions

  6
• Reduced Keys

  6
• European Layout

  6
• Inputs and Interfaces

  7
• Connecting Bar Code Scanners and Magnetic Stripe Readers

  7
• Parallel Port

  7
• ROM-DOS for Models DFB and DSB

  8
• Internal ROM-DOS Commands

  8
• External ROM-DOS Commands

  8
• Configuring the Bar Code Decoder

  9
• Installing the Configuration Software on a PC

  9
• Creating a Configuration File

  9
• Modify Parameters

  9
• Saving the File

  9
• Quitting the Program

  9
• Loading a Configuration File into the Bar Code Decoder

  9
• Troubleshooting

  10
• Unit does not boot

  10
• Do you hear tones when you boot the unit?

  10
• Do you see characters on the display?

  10
• Does the unit hang on a command?

  10
• Is the following line causing the problem?

  10
• Mini-Command appears at boot

  10
• Cannot copy files to A or B drives

  10
• Are you trying to copy files to the A drive?

  10
• Are you trying to copy files to the B drive?

  10
• Scanner is not working

  10
• Does the scanner appear to be powered up and registering good reads?

  10
• I cannot get a post or preamble configured

  10
• I cannot get files to the 6540 Terminal

  10
• I cannot connect to the network

  10