BenutzerhandbuchInhaltsverzeichnisTable of Contents6Safety2Section A - Installation7Section B - Operation15Section C - Accessories25Section D - Maintenance27Section E - Theory of Operation31Section F - Troubleshooting & Repair41Symptoms44Major physical or electrical damage is evident when the sheet metal cover(s) are removed.44Machine is dead – no output – no fan – no status indicator lights.44Machine is dead - not output - no status indicator lights - fans run.44All status indicators remain lit immediately after power up.44All the status lights begin to blink within 5 seconds of power up.45The machine powers up properly, but there is no response when the gun trigger is pulled. Only the power LED is lit.45When the torch trigger is pulled, air begins to flow; but no pilot arc is established.45The air begins to flow when the torch trigger is pulled. There is a very brief pilot arc. (Normal is 3...46The cutting arc starts but sputters badly.46The pilot arc is normal, but the arc will not transfer to the workpiece.47The Air Low LED is lit.48The Safety LED is flashing.48The Safety LED is lit and steady.48The Thermal LED is lit.49Section G - Electrical Diagrams99Größe: 1,42 MBSeiten: 110Language: EnglishHandbuch öffnen