Benutzerhandbuch für Mitsubishi Electronics FR-E5NC

Inhaltsverzeichnis

• SAFETY INSTRUCTIONS

  3
• CONTENTS

  6
• 1 PRE- OPERATION INSTRUCTIONS

  9
  • 1.1 Unpacking and Product Confirmation

    9
  • 1.2 Structure

    10
  • 1.3 Inverter Option (FR- E5NC) Specifications

    11
• 2 INSTALLATION

  12
  • 2.1 Pre- Installation Instructions

    12
  • 2.2 Installation Procedure

    12
  • 2.3 Inverter Replacement

    14
  • 2.4 System Configuration Example

    15
  • 2. 5 Wiring Method

    16
  • 2.6 Connection of Several Inverters

    17
• 3 INVERTER SETTING

  18
  • 3.1 Pre- Operation Setting

    18
    • 3.1.1 Inverter station number setting

      18
    • 3.1.2 Setting of the transmission baud rate setting switch

      19
  • 3.2 Operation Modes of the Inverter

    20
    • 3.2.1 Operation mode switching

      20
  • 3.3 Operation at Alarm Occurrence

    23
  • 3.4 Operation and Speed Command Write

    25
• 4. FUNCTION OVERVIEW

  27
  • 4. 1 Function Block Diagram

    27
  • 4. 2 Setting the Running Frequecy

    28
    • 4. 2. 1 Monitoring function

      29
    • 4.2.2 Operation commands

      30
    • 4. 2. 3 Running frequency

      30
    • 4.2.4 Parameter write

      30
    • 4.2.5 Parameter read

      30
• 5. COMMUNICATION SPECIFICATIONS

  31
  • 5.1 I/ O Signal List

    31
    • 5.1.1 Output signals (master unit -> inverter (FR- E5NC))

      31
    • 5. 1. 2 Input signals (inverter (FR- E5NC) -> master unit)

      34
  • 5.2 Remote Register Assignment

    36
    • 5.2.1 Remote registers (master unit -> inverter (FR- E5NC))

      36
    • 5.2.2 Remote registers (inverter (FR- E5NC) -> master unit)

      36
  • 5.3 Instruction Codes

    37
• 6. PROGRAMMING EXAMPLES

  39
  • 6. 1 Reply Code Definitions

    40
  • 6.2 Program Example for Reading the Inverter Status

    41
  • 6.3 Program Example for Setting the Operation Mode

    42
  • 6.4 Program Example for Setting the Operation Commands

    43
  • 6. 5 Program Example for Monitoring the Output Frequency

    44
    • 6.5.1 Monitor codes

      45
  • 6.6 Parameter Reading Program Example

    46
  • 6.7 Parameter Writing Program Example

    47
  • 6. 8 Running Frequency Setting Program Example

    48
  • 6.9 Alarm Definition Reading Program Example

    50
  • 6.10 Program Example for Resetting the Inverter at Inverter Error

    52
  • 6.11 Instructions

    53
• 7. HOW TO CHECK FOR ERROR USING THE LEDS

  55
  • 7.1 When One Inverter Is Connected

    55
  • 7.2 When Two or More Inverters Are Connected

    57
  • 7. 3 Communication Stops During Operation

    59
• REVISIONS

  61