Benutzerhandbuch für Motorola DR 3000

Inhaltsverzeichnis

• Introduction

  1
• Notations Used in This Manual

  1
• Repeater Description

  1
• MOTOTRBO Repeater Model Numbering Scheme

  1
• UHF1 High Power MOTOTRBO Repeater (403-470 MHz) Model Chart

  1
• Specifications

  1
• Test Equipment and Service Aids

  2
• Recommended Test Equipment

  2
• Service Aids

  2
• Programming Cables

  2
• Transceiver Performance Testing

  3
• General

  3
• Setup

  3
• Repeater Tuning and Programming

  4
• Introduction

  4
• Customer Programming Software Setup

  4
• Repeater Tuning Setup

  4
• Disassembly/Reassembly Procedures

  5
• Introduction

  5
• Preventive Maintenance

  5
• 5.2.1 Inspection

  5
• 5.2.2 Cleaning Procedures

  5
• Safe Handling of CMOS and LDMOS Devices

  5
• Repair Procedures and Techniques — General

  5
• Disassembling and Reassembling the Repeater — General

  5
• Disassembly Procedures — Detailed

  5
• 5.6.1 Disassembly of Cover

  5
• 5.6.2 Disassembly of Repeater Indicator Board

  5
• 5.6.3 Disassembly of Fan

  5
• 5.6.4 Removing Transmit Radio

  5
• 5.6.4.1 Removing Thermal Pad and Heatsink

  5
• 5.6.5 Removing Receive Radio, Power Supply and Connector Board Assembly

  5
• 5.6.5.1 Disassembly of Receive Radio

  5
• 5.6.5.2 Disassembly of Connector Board Assembly

  5
• 5.6.5.3 Disassembly of Power Supply

  5
• Transmit and Receive Radio Disassembly — Detailed

  5
• 5.7.1 Transceiver Board and Receiver Board Removal

  5
• Transmit and Receive Radio Reassembly — Detailed

  5
• 5.8.1 Transceiver Board and Receiver Board Reassembly

  5
• 5.8.2 Thermal Pad Replacement Procedure

  5
• 5.8.3 Reassembly of Receive Radio, Power Supply and Connector Board Assembly

  5
• 5.8.3.1 Reassembly of Power Supply

  5
• 5.8.3.2 Reassembly of Receive Radio

  5
• 5.8.3.3 Reassembly of Connector Board Assembly

  5
• 5.8.3.4 Reassembly of the Receive Bracket Assembly to the Enclosure

  5
• 5.8.4 Reassembly of Transmit Radio

  5
• 5.8.4.1 Replacing the Thermal Pad and Heatsink

  5
• 5.8.4.2 Reassembly of the Transmit Bracket Assembly to the Enclosure

  5
• 5.8.5 Reassembly of Fan

  5
• 5.8.6 Reassembly of Repeater Indicator Board

  5
• 5.8.7 Reassembly of Cover

  5
• Repeater Exploded Mechanical Views and Parts Lists

  5
• Torque Chart

  5
• Basic Troubleshooting

  6
• Introduction

  6
• 6.1.1 High Power RF Precaution

  6
• Replacement Service Kit Procedures

  6
• LED Indicator Descriptions

  6
• Repeater Model Numbering Scheme

  1
• Mobile & Repeater Rear Programming Cable PMKN4010_

  2
• Mobile & Repeater Rear Programming, Testing & Alignment Cable PMKN4016

  2
• Customer Programming Software Setup from Rear Accessory Connector

  4
• Repeater Tuning Equipment Setup

  4
• Removing Top Cover of Repeater Enclosure

  5
• Disconnecting Ethernet Cable and Flex Cable

  5
• Repeater Indicator Board Disassembly

  5
• Fan Orientation

  5
• Tx Radio Disassembly

  5
• Receive Radio Removal

  5
• Die Cast Cover Removal

  5
• Accessory Connector Removal

  5
• RF/DC Retention Clips Removal

  5
• Transceiver Board Removal

  5
• Thermal Pads and Shield Gasketing on Chassis and Die Cast Cover

  5
• Transceiver Board with Thermal Pads

  5
• Replacing GPS Plug

  5
• Placing the Transceiver Board in the Chassis

  5
• Inserting RF/DC Retention Clips

  5
• Inserting Accessory Connector

  5
• Assembling of PA Pad and O-ring

  5
• Assembling Die Cast Cover onto Chassis

  5
• Screw Sequence to Tighten Die Cast Cover

  5
• Replacing Thermal Pads

  5
• Aligning Driver Pad on Chassis

  5
• Placing Thermal Pads on PA and Transistor Components

  5
• Fan Orientation

  5
• Repeater Assembly Exploded View

  5
• Receive Bracket and Radio Assembly Exploded View

  5
• Transmit Bracket and Radio Assembly Exploded View

  5
• Front Panel Complete Assembly Exploded View

  5
• Frequency Ranges and Power Levels

  1
• Recommended Test Equipment

  2
• Service Aids

  2
• Initial Equipment Control Settings

  3
• Receiver Performance Checks

  3
• Repeater Software Program Kits

  4
• Lead Free Solder Wire Part Number List

  5
• Lead Free Solder Paste Part Number List

  5
• Repeater Exploded View Parts List

  5
• Torque Specifications for Nuts and Screws

  5
• LED Indicator Descriptions

  6