Benutzerhandbuch für Pitney Bowes DA300

Inhaltsverzeichnis

• Welcome to the DA300

  1
• Using This Guide

  1
• System Requirements

  1
• Getting Help

  1
• Online Help

  1
• Phone Support

  1
• Before You Call

  1
• The World Wide Web

  1
• Printer Options

  1
• Ordering Supplies

  1
• Unpacking the Printer

  2
• Package Contents

  2
• Setting Up the DA300

  2
• Choosing a Location for Your Printer

  2
• Important Safety Notes

  2
• Assembling the DA300

  2
• 1. Attaching the Material Prop

  2
• 2. Attach the Wireframe to the Printer

  2
• 3. Install the Sliding Fence

  2
• 4. Position the Output Stacker Tray

  2
• 5. Connect the Printer Cable

  2
• 6. Connect the Power Cord

  2
• 7. Turn On Power

  2
• 8. Install the Ink Jet Cartridge

  2
• Removing the Ink Jet Cartridge

  2
• Printer Features

  3
• Setting Up a Job

  3
• 1. Set the Separator Gap

  3
• 2. Center the Wireframe under the Material

  3
• 3. Set the Feed Angle

  3
• 4. Position the Feed Fence

  3
• 5. Load Material

  3
• 6. Adjust the Position of the Material Prop

  3
• 7. Adjust the Media Thickness Lever

  3
• 8. Adjust the Exit Rollers

  3
• 9. Print a Test Piece

  3
• Installing the Printer Software

  4
• Installing the Printer Driver/Ed Plus

  4
• Selecting Printer Properties

  4
• Using the Printer Properties Windows

  4
• Selecting the DA300 from a Windows Application

  4
• Envelope DesignerTM Plus

  4
• Preventive Maintenance

  5
• Cleaning

  5
• Print Quality Problems

  5
• Exit Rollers

  5
• Sensor

  5
• Floor Assembly and Top Cover

  5
• Problems and Solutions

  6
• Feed Problems

  6
• Print Quality Problems

  6
• Interface Problems

  6
• Motor Problems

  6
• Barcode Problems

  6
• Other Problems

  6
• Welcome to the DA300

  1
• Using This Guide

  1
• System Requirements

  1
• Getting Help

  1
• Printer Options

  1
• Ordering Supplies

  1
• Unpacking the Printer

  2
• Package Contents

  2
• Setting Up the DA300

  2
• Choosing a Location

  2
• Important Safety Notes

  2
• Assembling the DA300

  2
• Attach the Material Prop

  2
• Attach the Wire Frame

  2
• Install the Sliding Fence

  2
• Turn on Power

  2
• Install Ink Jet Cartridge

  2
• Printer Features

  3
• Setting Up a Job

  3
• Set the Separator Gap

  3
• Center the Wireform

  3
• Set the Feed Angle

  3
• Position the Feed Fence

  3
• Load Materials

  3
• Adjust Material Prop

  3
• Adjust Exit Rollers

  3
• Print a Test Piece

  3
• Printer Software

  4
• Installing the Software

  4
• Windows

  4
• Windows Application

  4
• Envelope DesignerTM Plus

  4
• Preventive Maintenance

  5
• Cleaning

  5
• Print Quality Problems

  5
• Exit Rollers

  5
• Sensor

  5
• Floor Assembly /Top Cover

  5
• Problems and Solutions

  6
• Feed Problems

  6
• Print Quality Problems

  6
• Interface Problems

  6
• Motor Problems

  6
• Barcode Problems

  6
• Other Problems

  6