Planet Technology ADE-3000 Handbücher

Benutzerhandbuch

Inhaltsverzeichnis

Internet Access Features..................................................................................1 Advanced Functions..........................................................................................2 LAN Features.........................
3
Front Panel........................................................................................................3 Rear Panel........................................................................................................3
3
Preparation........................................................................................................6 Connecting to ADE-3000..................................................................................6
3
System Wide Settings.....................................................................................10 Per VC Setting................................................................................................10
3
Bridge Mode....................................................................................................11 PPPoE, PPPoA Connection for WAN (Routing mode)...................................13 Fixed IP for WAN.........................................
3
DHCP Setting..................................................................................................19
3
TCP/IP Settings...............................................................................................27
3
Internet Access...............................................................................................33
3
Congratulations on the purchase of ADE-3000. The ADSL Bridge Router will allow multiple LAN users to share an Internet user account, via a DSL connection. Once the ADSL Bridge Router is installed and configured, the Internet is just a click away.
5
Figure 1-1:
5
ADE-3000 incorporates many advanced features, carefully designed to provide sophisticated functions for user’s convenience while surfing in the net.
5
All users on the LAN (up to 253 users) can access the Internet through ADE-3000, using only a single external IP Address. (router mode). ADE-3000 has a RJ-11 port for connecting a DSL connection to provide Internet resource sharing feature. All popular DS
5
This feature allows Internet users to access Internet servers on your LAN. The required setup is quick and easy. One (1) PC on your local LAN can be configured to allow unrestricted 2- way communication with Servers or individual users on the Internet. Th
6
One (the Ethernet RJ-45 port) is used to connect to your network adapter. The other (the USB port) can be connected to USB interface DSL/Cable router or directly with computer. Dynamic Host Configuration Protocol provides a dynamic IP address to PCs and o
6
. Use WEB browser from anywhere to begin the configuration. . The ADE-3000 can be managed from any PC on your LAN. And, if the Internet connection exists, it can also (optionally) be configured via the Internet.
6
. Two-level password protection can provided stronger protection to prevent unauthorized users from modifying the configuration data and settings. . An intrinsic side effect of NAT (Network Address Translation) technology is that by allowing all LAN users
6
The following items should be included: ADE-3000 Unit Power Adapter Quick Installation Guide CD-ROM containing USB port driver USB cable RJ-11 cable
6
If any of the above items are damaged or missing, please contact your dealer immediately.
6
The front panel of ADE-3000 has 2 LEDs for one LAN port and one ADSL port. Figure 2 displays a front panel of the router.
7
Figure 1-2:
7
LED definitions
7
Status ADSL On – ADSL LED status will be on after chaining procedure with DSLAM is completed
7
Status LAN On –LAN LED will be on while RJ-45 connector is plugged in.
7
Figure 1-3:
7
Button definition
7
Reset Button This button has two (2) functions: When pressed and released, ADE-3000 will reboot (restart). When reset button is pressed over 5 seconds and then release. ALL data will be clear and restore ALL settings to the factory default values.
7
If ADE-3000's IP Address or password is lost, the following procedure can be used to recover from this situation.
7
Pressing the Reset button for more than 5 seconds. ADE-3000 will restore to factory default setting. Note that this should be done only when you had tried all the troubleshooting options. Pressing the Reset button during operation may bring you into the r
7
Computer PC or TCP/IP compliant workstations 32 MB RAM 20 MB of free disk space minimum (for USB driver installation) Ethernet Network Interface Controller (NIC) RJ45 Port USB Port Internet Browser
8
Select a suitable place on the network to install ADE-3000. Ensure ADE-3000 is powered OFF.
8
Use standard LAN cables to connect PCs to the ETHERNET port on ADE-3000. Either 10BaseT or 100BaseT connections can be used.
8
If required, use a standard LAN cable to connect the "Uplink" port to a standard port on another hub.
9
Connect one end of the RJ-11 phone cord to the LINE port on your ADSL modem. Connect the other end of the RJ-11 phone cord to your wall phone jack.
9
Connect the supplied power adapter to ADE-3000 and power up. Use only the power adapter provided. Using a different one may cause hardware damage
9
If there is no cable or wrong cable connected, LED on ADE-3000 should flash in Red, then turn OFF. If it stays Red, there might be a hardware error. For each LAN (PC) connection, the LAN LED should be (provided the PC is also ON.) The LED should be .
9
ADE-3000 contains an HTTP server. This enables you to connect to it, and configure it, using your Web Browser. . The configuration program has been tested on the following browsers: Netscape V4.08 or later Internet Explorer V4 or later
10
Before attempting to configure ADE-3000, please ensure that: Your PC can establish a physical connection to ADE-3000. The PC and ADE-3000 must be directly connected (using the ETHERNET port on ADE-3000) or on the same LAN segment. ADE-3000 must be install
10
To establish a connection from your PC to ADE-3000: 1. After installing ADE-3000 in your LAN, start your PC. If your PC is already running, restart it. 2. Start your WEB browser. 3. In the box, enter "HTTP://" and the IP Address of ADE-3000, as in this ex
10
Figure 3-1:
11
If ADE does not respond, check the following: Machine is properly installed, LAN connection is OK, and it is powered ON. You can test the connection by using the "Ping" command: Open the MS-DOS window or command prompt window. Enter the command: ping 10.0
11
Ensure that your PC and ADE-3000 are on the same network segment. (If you don't have a router, this must be the case.)
11
Once you login in ADE-3000, its Home page will appear. It shows the firmware versions and WAN and LAN interface status.
12
Figure 3-2:
12
The page shows the ADSL physical layer status.
12
Figure 3-3:
12
The page shows the information and status of LAN port, DHCP client table, linking status of Ethernet and USB interface.
13
Figure 3-4:
13
This chapter describes the setup procedure for: WAN Access LAN configuration
14
PCs on your local LAN may also require configuration. For details, see .
14
Select the WAN link under Configuration column to set up WAN connection. It is required to know the type of Internet connection service used by your ISP. Note: You only need to fill in the fields that your ISP provided, and leave the others as default.
14
Figure 4-1:
14
Under the , the configuration will take effect on all WAN PVCs.
14
The default gateway is the next-hop router IP address on the Internet.
14
Under , it provides the configurations for IP address and VPI/VCI.
14
Figure 4-2:
15
To switch between the PVCs, please choose the options of virtual circuit and click on the button to switch over.
15
Figure 4-3:
15
Types of Internet connection services supported by ADE-3000 are explained below.
15
At the WAN Configuration page, insert the VCI/VPI provided by ISP. Enable “ ”, and choose suitable packet encapsulation.
15
Figure 4-4:
15
Figure 4-5:
16
Click “ ” to commit modifications you’ve done, then click “ ” to store settings. (Modifications will not take effects until next reboot.)
16
Click on “ ” tab on left panel, and the NAT function in the option menu.
16
Figure 4-6:
16
Click “ ” on left panel to write configuration into machine, and reboot to make settings effective.
16
If PPPoE (Point-to-Point Over Ethernet) or PPPoA (Point-to Point Over ATM) is provided to establish communications, and are required to be obtained from ISP. And values must be obtained from them as well, for some local ISPs don’t offer this information a
17
To set up a PPPoE or PPPoA connection for WAN, follow the instructions below:
17
Fill in the VCI/VPI entries with the information you get from ISP.
17
Choose suitable packet encapsulation (PPPoA LLC/VC-Mux, PPPoE LLC/VC-Mux). Disable “Bridge”. (Packet encapsulation information also has to be obtained from ISP.)
17
Figure 4-7:
17
If your ISP provides this info, please type it into the field or leave it blank (factory default).
17
Fill in the entries with the information provided by ISP.
17
It is the amount of time you would like to pass before the Router drops your Internet connection due to inactivity. Enter zero ( ) in the field to remain Internet connection on at all time. The idle time ranges from 0 to 32767 seconds.
17
When option is chosen, the PAP mode will run first then CHAP.
17
If you check this option, the Disconnect Timeout should set to 0 second. Otherwise there will be a conflict between them.
17
Leave this option unchecked.
17
Figure 4-8:
18
Click on “ ” tab on left panel, and the function in the option menu.
18
Click “ ” on left panel to write configuration into machine, and reboot to make settings effective.
18
If your ISP has assigned static IP address (See Appendix A ), you may connect to the Internet by using a fixed, or static address. To set up a Fixed IP for WAN, do the following steps as an example.
18
Enter the information of , and provided by ISP. Note: These parameters are required for building up connection. If one of these information incorrect or unavailable, please contact your ISP for correct information.
18
Figure 4-9:
19
Choose suitable packet encapsulation (1483 Bridged/ Routed LLC, 1483 Bridged/ Routed Mux, Classical IP over ATM). And “Bridge” function.
19
Click “ ” to commit modifications you’ve done, then click “ ” to store settings. (Modifications will not take effects until next reboot.)
19
Click on “ ” tab on left panel, and the function in the option menu.
19
Click “ ” on left panel to write configuration into machine, and reboot to make settings effective.
19
If ISP provides a dynamic IP for Internet connection, following steps illustrate how to enable the connection via ADE-3000.
19
Choose suitable packet encapsulation (1483 Bridged/ Routed LLC, 1483 Bridged/ Routed Mux, Classical IP over ATM). And “Bridge” function.
19
Check the option, and fill in the Host Name field (if required.) (This information should be obtained from ISP. If there is no special demand for this, leave this column blank.)
19
Figure 4-10:
20
Click on “ ” tab on left panel, and the function in the option menu.
20
Click “ ” on left panel to write configuration into machine, and reboot to make settings effective.
20
Here are explanations about some fields not mentioned above.
20
The is developed to solve the scenario when the ISP only recognizes one MAC address. Copy the ISP-recognized MAC address here.
20
Figure 4-11:
20
If your ISP provides this information to you, fill it in appropriate field.
20
UBR and CBR are two different types of service supported from the ATM.
20
Bandwidth setting takes effect only when the CBR is selected. The maximum available bandwidth is from the upstream data rate of ADSL status page (see Section, ADSL).
20
Figure 4-12:
20
Support IGMP proxy/relay function for ADSL modem, based on the following
20
requirement and case: On CO side, there must be at least one IGMP querier (router) present. IGMP querier will send IGMP query packet. The ADSL modem is responsible to relay these IGMP query to Ethernet. End -user multicast application device send IGMP rep
21
Table 4-1 IGMP packets process
21
:
21
Table 4-1 WAN configurations Overview
21
: Encapsulation is based on the ISP configuration. It may be different for different ISPs and countries.
22
The LAN IP and Subnet Mask of ADE-3000 are the values seen by the users on their internal network. The default IP is for IP and for Subnet Mask.
23
Figure 4-13:
23
A DHCP (Dynamic Host Configuration Protocol) Server automatically assigns IP address to each computer on your network. Unless you already have one, it is highly recommended that your router be set up as a DHCP server..
23
The DHCP address pool is based on LAN port IP address plus 12 IP addresses. For example, the LAN IP address is 10.0.0.2; the DHCP address pool is at the range of 10.0.0.3 to 10.0.0.14.
23
The DHCP address pool is at the range of and . . IP address range: 255 total IP addresses – 1 broadcast address – 1 LAN port IP address.
23
The Lease time is the amount of time of a network user will be allowed to connect with DHCP server.
23
mode: DHCP server only allocates one IP address to local PC. mode: DHCP server allocates the IP addresses specified bye the DHCP address pool.
23
Figure 4-14:
24
By clicking this link, you will be directed to Ethernet Mode page. You can specify the type of LAN connection or use AutoSense. Default is AutoSense.
24
Figure 4-15:
24
By clicking NAT link under Configuration column, NAT Configuration page will be shown. You have to define the session used for NAT first. Click the Session Name Configuration link below, you will see NAT Session Name Configuration page.
24
Figure 4-16:
25
Enter the session name you want to use for NAT. Select VC number, which is assigned to the session. Choose , and then click button, the new defined session should be added to the table below immediately. If you want to remove an existing session, the proc
25
Figure 4-17:
25
After session defining, click the Go back to NAT Configuration link.
25
Two types of (Network Address Translation) service are provided by ADE-3000.
25
option only maps single WAN IP address to the local PC IP address. This is peer- to-peer mapping (1 on 1). For each PVC, only one local PC IP address can be associated with each WAN PVC.
26
option maps the IP address and UDP/TCP port ID of the WAN PVC to the IP address and UDP/TCP port ID of the local PCs. (1 to N). It is the multiple-mapping mechanism. More than one local PC can be associated with one WAN PVC. The setting procedures are as
26
Figure 4-18:
26
Figure 4-19:
27
After all these settings are done, click “ ” button, the record will be added to the table below immediately.
27
Figure 4-20:
27
Virtual server feature allows users to make Servers on your LAN accessible to Internet users. Normally, Internet users would not be able to access a server on your LAN because of native NAT protection.
27
The "Virtual Server" feature solves these problems and allows Internet users to connect to your servers.
27
To provide server-based service, WAN IP address should be static, rather than dynamic, to make it easier for Internet users to connect to your Servers.
27
However, service allows users to connect to your Virtual Servers using a URL, instead of an IP Address.
27
You can set up public services on your network by configuring the values in the Virtual Server Configuration page. You may assign certain IP addresses as the destination of the network information. When users from the Internet make certain requests of you
27
This function is generally used to set up a web server, ftp server, or e-mail server on your network. Figure shows the screen of Virtual Server Configuration page,
28
Select the number used by the service, ranged from 0 to 65535.
28
Select the number used on internal server mapping to public port, it is not required to be the same as public port number.
28
Select appropriate communication type via checkbox.
28
Enter the of local server that you want the Internet users to be able to access.
28
Click the “ ” button to save the settings.
28
Click “ ” on left panel to write configuration into machine, and reboot to make settings effective.
28
Figure 4-21:
28
The configuration page allows you to set the configuration of IP filtering. You can add 4 records max.
28
When the bridge filtering is enabled, enter the , select
28
and click . Then all incoming WAN and LAN Ethernet packets matched with this source MAC address will be filtered out. If the is selected, then the packets will be forwarded to the destination PC.
29
When the bridge filtering is enabled, enter , select and click . Then all incoming WAN and LAN Ethernet packets matched with this destination MAC address will be filtered out. If the is selected, then the packets will be forwarded to the destination PC.
29
Enter the hexadecimal number for the Ethernet type field in Ethernet_II packets. For example, 0800 is for IP protocol.
29
Figure 4-22:
29
The page allows you to set the configuration of DNS proxy. The Conexant firmware supports the DNS proxy function. For the DHCP requests from local PCs, the DHCP server will set the LAN port IP as the default DNS server. Thus, all DNS query messages will c
29
Four DNS proxy modes available in ADE-3000:
29
The LAN port does not process the DNS query message. For the DHCP requests from local PCs, the DHCP server will set the user-configured preferred DNS sever or alternate DNS server whichever is available as the DNS server. Then all DNS query messages will
29
The DNS proxy will store the DNS server IP addresses obtained from DHCP client or PPP into the table. And all DNS query messages will be sent to one of the dynamically obtained DNS servers.
29
The DNS proxy will use the user-configured preferred DNS server and alternate DNS server. And all DNS query message will be sent to one of DNS servers.
29
The DNS proxy’s table has all the IP addresses of dynamically obtained and user configured DNS servers.
29
Figure 4-23:
30
: Before the DNS proxy mode is enabled; please go to the to enable the DNS proxy. Otherwise, DNS Proxy selection will not be valid.
30
For each PC, the following may to be configured: TCP/IP network settings Internet Access configuration
31
This section describes how to configure Windows clients for Internet access via ADE- 3000.
31
The first step is to check the PC's TCP/IP settings.
31
ADE-3000 uses the TCP/IP network protocol for all functions, so it is essential that the TCP/IP protocol be installed and configured on each PC.
31
By default, ADE-3000 will act as a DHCP Server, automatically providing a suitable IP Address (and related information) to each PC when the PC boots. For all non-Server versions of Windows, the default TCP/IP setting is to act as a DHCP client. If you wis
31
1. Select . You should see a screen like the following:
32
Figure 5-1:
32
2. Select the protocol for your network card. 3. Click on the button. You should then see a screen like the following.
32
Figure 5-2:
32
Ensure your TCP/IP settings are correct, as follows:
32
To use DHCP, select the radio button . This is the default Windows settings.
32
Restart your PC to ensure it obtains an IP Address from ADE-3000.
32
If your PC is already configured, do NOT change the settings on the IP Address tab shown in above. On the tab, enter ADE-3000's IP address in the field and click , as shown below. Your LAN administrator can advise you of the IP Address they assigned to AD
32
Figure 5-3:
33
On the tab, ensure is selected. If the list is empty, enter the DNS address provided by your ISP in the fields beside the button, then click .
33
Figure 5-4:
33
1. Select . 2. Right click the icon and select . You should see a screen like the following:
33
Figure 5-5:
34
3. Select the protocol for your network card. 4. Click on the button. You should then see a screen like the following.
34
Figure 5-6:
35
5. Ensure your TCP/IP settings are correct:
35
To use DHCP, select the radio button . This is the default Windows settings.
35
Restart your PC to ensure it obtains an IP Address from ADE-3000.
35
If your PC is already configured, check with your network administrator before making the following changes. Enter ADE-3000's IP address in the field and click . (Your LAN administrator can advise you of the IP Address they assigned to ADE-3000.) If the f
35
1. Select Control Panel - Network Connection. 2. Right click the and choose . You should see a screen like the following:
36
Figure 5-7:
36
3. Select the protocol for your network card. 4. Click on the button. You should then see a screen like the following.
36
Figure 5-8:
36
5. Ensure your TCP/IP settings are correct.
36
To use DHCP, select the radio button . This is the default Windows settings.
37
Restart your PC to ensure it obtains an IP Address from ADE-3000.
37
If your PC is already configured, do NOT change the settings on the screen shown in above, unless advised to do so by your network administrator. You can enter ADE-3000's IP address in the field and click . Your LAN administrator can advise you of the IP
37
To configure your PCs to use ADE-3000 for Internet access: Use the following procedure to configure your Browser to access the Internet via the LAN, rather than by a Dial-up connection.
37
1. Select . 2. Select the tab, and click the button. 3. Select "I want to set up my Internet connection manually, or I want to connect through a local area network (LAN)" and click . 4. Select "I connect through a local area network (LAN)" and click . 5.
37
1. Select Start Menu - Control Panel - Network and Internet Connections. 2. Select . 3. Select the tab, and click the button. 4. Cancel the pop-up "Location Information" screen. 5. Click on the "New Connection Wizard" screen. 6. Select "Connect to the Int
37
From your Macintosh, you can access the Internet via ADE-3000. The procedure is as follows. 1. Open the TCP/IP Control Panel. 2. Select from the pop-up menu. 3. Select from the pop-up menu. The DHCP Client ID field can be left blank. Close the TCP/IP pane
38
Note: If using manually assigned IP addresses instead of DHCP, the only change required is to set the field to ADE-3000's IP Address.
38
To access the Internet via ADE-3000, it is only necessary to set ADE-3000 as the "Gateway".
38
By default, most Unix installations use a fixed IP Address. If you wish to continue using a fixed IP Address, make the following changes to your configuration. Set your "Default Gateway" to the IP Address of ADE-3000. Ensure your DNS (Name server) setting
38
The procedure below may vary according to your version of Linux and X -windows shell. 1. Start your X Windows client. 2. Select 3. Select the "Interface" entry for your Network card. Normally, this will be called "eth0". 4. Click the button, set the "prot
38
The links under are only to be accessed and configured, when it is login with administrator login name and password.
39
The page shows the information and status of WAN PVCs. Select the VC number to view connection status. The allows users to release and renew the WAN IP address in the WAN DHCP Client Enabled (dynamic) mode.
39
Figure 6-1:
39
The page shows all the statistics information of ATM cells.
39
Figure 6-2
40
The page shows the status of PPP for each PVC. Connect and Disconnect allows you to manually connect/disconnect the PPP connection for specified PVC. If current connection is disconnected after the you will have to go to this page, choose the correct and
40
Figure 6-3:
40
The page shows the statistics for all TCP connections. This is for internal network only.
41
Figure 6-4:
41
The page displays routing table and allows you to manually enter the routing entry. The interface br0 means the USB interface; lo0 means the loop back interface.
41
Figure 6-5:
41
The page shows the current learned Bridge MAC table. The is for determining the update period for the MAC table.
42
Figure 6-6:
42
The page allows you to set the configuration for ADSL protocols.
42
Trellis Code. By default, it is always enabled.
42
This is for the ADSL handshake protocol.
42
The wiring selection for the RJ-11.
42
Bit swapping enables an ADSL system to change the number of bits assigned to a subcarrier, or change the transmit energy of a subcarrier without interrupting data flow. (No need to configure this item unless it is necessary)
42
Figure 6-7:
43
allows users to setup RIPv1/v2 support and related parameters in ADE-3000.
43
Start or Stop a RIP session. The resulting RIP session will monitor all network interfaces that are currently available for messages from other RIP routers.
43
If the supplier parameter is true, it will also respond to specific requests from other routers and transmit route updates over every known interface at the interval specified by Interval.
43
Specifying a gateway setting of true establishes this router as a gateway to the wider Internet, capable of routing packets anywhere within the local networks.
43
The value True indicates that the RIP messages are sent to the pre-defined multicast address of 224.0.0.9 (which requires a version setting of 2). Otherwise, it will use broadcast address.
43
The interval of the RIP information will be advertised.
43
Figure 6-8:
44
The page allows users to set the passwords for user and administrator.
44
The allows users to set all the miscellaneous configurations in ADE-3000.
45
Figure 6-9:
45
When it is enabled, the Web setting pages of ADE-3000 can be accessed from the WAN side. When it is disabled, you can only access the Web pages from the LAN side.
45
When it is enabled, the FTP connection can be established from both the LAN and WAN sides.
45
When it is enabled, it can upgrade the image code with the TFTP client application run at either the LAN or WAN sides.
45
An example for the TFTP client updating the vxworks.z product image code is:
45
Figure 6-10:
45
The HTTP server port can be changed to other secure port number. For example, when it is changed to 1001, the HTTP server address for the LAN side is http://10.0.0.2:1001 .
46
A DMZ (De-Militarized Zone) is added between a protected network and an external network, in order to provide an additional layer of security. When there is a suspected packet coming from WAN, the firewall will forward this packet to the DMZ host.
46
The IP address of the DMZ host at LAN side.
46
If it is enabled, the DHCP requests from local PCs will forward to the DHCP server runs on WAN side. To have this function working properly, please disable the NAT to run on router mode only, disable the DHCP server on the LAN port, and make sure the rout
46
The DHCP server runs on WAN side.
46
Here is the global setting for IGMP Proxy. If it is enabled, then the enabled IGMP Proxy on WAN PVCs will be working. Otherwise, no WAN PVC can have IGMP Proxy working on it.
46
If it is enabled, the PPP session will be automatically established when there is a packet wants to go out the WAN. The differences between PPP connect on WAN access and the Automatic Reconnect: Some ISPs would terminate the PPP session due to the inactiv
46
When the PPP Half Bridge is enabled, only one PC is able to access the Internet, and the DHCP server will duplicate the WAN IP address from the ISP to the local client PC. .
46
The page allows you to reset the modem to original factory default configuration (factory.reg).
47
Click this link; system will perform diagnostic tests automatically. And show the testing result in page. If some of the tests fail, related help links are available for reference while troubleshooting.
47
Figure 6-11:
47
The page allows you to upgrade the image code locally. Browse the location of firmware file, and click the to start the update.
47
The page allows user to upgrade the image code from remote FTP server. Assume an FTP server stores the updated image on Internet. Click Image Download to initiate the updating. To set up the ftp server IP address, please save the UpdateHost parameter unde
47
Users may acquire information of the system from this screen, including the time, and connection process related messages.
48
Figure 6-12:
48
This chapter covers some common problems that may be encountered while using ADE-3000 and some possible solutions to them. If you follow the suggested steps and ADE-3000 still does not function properly, contact your dealer for further advice.
49
Check the following: ADE-3000 is properly installed, LAN connections are OK, and it is powered ON. Ensure that your PC and ADE-3000 are on the same network segment. (If you don't have a router, this must be the case.) If your PC is set to "Obtain an IP Ad
49
A number of things could be causing this.
49
Try the following troubleshooting steps. Check if other PCs work. If they do, ensure that your PCs IP settings are correct. If using a Fixed IP Address, check the Network Mask, Default gateway and DNS configured on PC. If the PCs are configured correctly,
49
If the PPP is disconnected after the Disconnect Timeout and how can I reconnect it?
49
I reconnect it?
50
You have to go to the PPP Status under Admin Privileged column, choose the correct and option, and then click to restart a new PPP secession.
50
Since only one PVC is mapped to one local PC IP address, why can I input more than one IP address for one NAT session?
50
Even it is applicable to insert multiple IPs for NAT mapping, only the first IP address of each session takes effect.
50
Model ADE-3000
51
Dimensions 175 mm (W) * 130 mm (D) * 32 mm (H)
51
Operating Temperature 0 C to 40 C
51
Storage Temperature -10 C to 70 C
51
Network Protocol: UDP, TFTP, TCP/ IP, ICMP, ARP, RIP I/ II, NAT, HTTP, DHCP, IGMP, IPSec, PPPoE, PPTP, L2TP, NAPT,
51
ATM Protocol and Encapsulations RFC 2364 – PPP over ATM VCMUX
51
RFC 2364 – PPP over ATM LLC
51
RFC 2516 – PPP over Ethernet VCMUX
51
RFC 2516 – PPP over Ethernet LLCSNAP
51
RFC 1577 - Classic IP over ATM
51
RFC 1483 – Bridged IP over ATM LLCSNAP
51
RFC 1483 – Routed IP over ATM LLCSNAP
51
RFC 1483 – Bridged IP over ATM VCMUX
51
RFC 1483 – Routed IP over ATM VCMUX
51
ATM AAAL5
51
AAAL5 UBR & CBR
51
OAM F4/F5
51
VPI/VCI range: 0 to 255/0 to 65536
51
Up to 8 PVCs (simultaneous and encapsulation independent)
51
Network Interface: LAN port: RJ-45 interface: 10/100M, Half or Full Duplex, auto- negotiation
51
USB interface: USB 1.1 Type B full speed 12Mbps
51
WAN port: RJ11 for ADSL connection
51
External Power Adapter 12V AC, 1000mA
51
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:
52
This device may not cause harmful interference.
52
This device must accept any interference received, including interference that may cause undesired operation.
52
This is a Class B product. In a domestic environment this product may cause radio interference in which case the user may be required to take adequate measures.
52

Größe:

1,18 MB
Seiten:

52
Language:

English

Handbuch öffnen

Benutzerhandbuch für Planet Technology ADE-3000

Benutzerhandbuch

Inhaltsverzeichnis

Benutzerhandbuch

Inhaltsverzeichnis