Benutzerhandbuch für Runco CL-700

Benutzerhandbuch (English)

Benutzerhandbuch

Inhaltsverzeichnis

ON
11
Hold down this button for ONE second to turn on the unit.
11
OFF
11
Press this button to turn off the unit.
11
ANAMORPHIC: For 16: 9 DVDs.
11
4 X 3: The input signal will be scaled to fit 4: 3 display mode in the center of screen.
11
LETTERBOX: Letter box mode. Image in letter box format is enlarged to fit 16:9 full screen displa...
11
VIRTUAL WIDE: 4:3 image is enlarged NON- linearly in horizontal direction to fit 16: 9 full scree...
11
VIDEO: Composite video signal input.
11
S-VIDEO: S-Video signal input
11
COMPONENT: Component Y/ CB/CR input
11
COMPONENT HD: DTV Y/ PB/PR signal input
11
RGB HD: DTV RGBHV signal input
11
PC: Computer signal input
11
PIP (Picture in Picture)
11
Enable the PIP function. Use ARROW keys to adjust the position of the PIP window (see "PIP functi...
11
ACTIVE: Switch to the active window in PIP display mode.
11
PIP+: Enlarge the size of PIP window.
11
PIP-: Shrink the size of PIP window.
11
LIGHT: Turn on the backlight of remote control.
11
CUSTOM
11
Recall memory 1 ~ 3 sequentially (see "Selecting Video Memory" on page16).
11
PICTURE
11
Access the Picture Setting menu (see "PICTURE Setting Page" on page18).
11
ARROW (Å/É/Ç/Ñ)
11
Use to select the menu or to make various adjustments.
11
ENTER
11
Enter the setting of items in the menu.
11
EXIT
11
Exit and save the setting(s) of items in the menu.
11
MENU
11
Turns on /off the on-screen display menu.
11
Runco CL-500 Video Projector
5
User’s Manual
5
- Thank you for your purchase of this quality Runco video projector! It has been designed to provid...
  5
WARNING
5
- This symbol is intended to alert the user to the presence of uninsulated " dangerous voltage " wi...
  5
- This symbol is intended to alert the user to the presence of important operating and maintenance ...
  5
- This equipment has been tested and found to comply with the limits for a Class B digital device, ...
  5
- 1. Read these instructions.
  5
- 2. Keep these instructions.
  5
- 3. Heed all warnings.
  5
- 4. Do not use this projector near water, outdoors or otherwise exposed to the elements.
  5
- 5. Clean only with a dry cloth.
  5
- 6. Do not block any ventilation openings.
  5
- 7. Do not install near any heat sources such as radiators, heat registers, stoves, or other appar...
  5
- 8. Do not defeat the safety feature of the polarized or grounding type plug. A polarized type plu...
  5
- 9. The RJ11 telephone jack of RS323C port does not connect for telephine line connection.
  5
- 10. The 12V trigger only output DC 12V signal for triggering. Do not connect to any other power i...
  5
- 11. Only use accessories specified by RUNCO International.
  5
- 12. Keep the packing material in case the projector should ever need to be shipped.
  5
- 13. Unplug this projector during lightning storms or when it will not be used for an extended per...
  5
- 14. The lamp becomes extremely hot during operation. Allow the projector to cool down for approxi...
  5
- 15. Refer all servicing to qualified service personnel. Servicing is required when the projector ...
  5
Table of Contents
6
1. Overview
7
- Features
  7
- Location
  8
  - Front / Upper Side
    8
  - Rear / Bottom Side
    8
- Controls and Functions
  9
  - Control Panel
    9
- Zoom Ring
  9
- Adjust the size of the image
  9
  - Rotate right to enlarge the image, and rotate left to make the image smaller.
    9
  - 4.
    9
- Focus Ring
  9
- Adjust the focus of the image
  9
  - Rotate the focus ring right or left to focus the image.
    9
  - Connector Panel
    10
    - 1.
      10
    - Video (RCA Jack)
      10
    - Composite video signal input.
      10
    - 2.
      10
    - S-Video (mini DIN 4-pin)
      10
    - Y/C (S-video) signal input
      10
    - 3.
      10
    - Component (RCA Jacks)
      10
    - 480i Component (Y/CB/CR) video signal input
      10
    - 4.
      10
    - RGB/ HDTV (BNC)
      10
    - DTV Y/PB/PR or DTV RGB video signal input.
      10
    - 5.
      10
    - Computer (D-Sub 15-pin)
      10
    - RGB Computer signal input.
      10
    - 6.
      10
    - RS-232C (RJ-11 Jack)
      10
    - RS-232C control signal input.
      10
    - 7.
      10
    - 12v Trigger (mini jack)
      10
    - +12V output, active when the projector is turned on.
      10
  - Remote Control
    11
2. Installation
12
- Remote Control
  12
  - Push and slide to open the cover. Install the two AAA batteries with the correct polarity, then c...
    12
    - Notes on Batteries
      12
    - Notes on Remote Control Operation
      12
      - Make sure that there is nothing obstructing the infrared beam between the remote control and the ...
        12
      - The useable range is between 3m (from the front of the projector) and 4m (from the rear of the pr...
        12
- Projector
  12
  - Connect the Power Cord
    12
- Plug the supplied power cord into the AC inlet in the rear of this unit.
  12
- Turn on the main power switch in the rear of this unit (next to the AC inlet). The POWER LED will...
  12
3. Connecting
17
- When connecting, make sure to:
  17
- 1. Turn off all equipment before making any connections.
  17
- 2. Use the correct signal cables for each source.
  17
- 3. Ensure the cables are firmly connected.
  17
- 4. Connect all audio signals to external speakers. This projector is not equipped with speakers.
  17
- Connecting Video Inputs
  17
- Connecting a Computer
  19
  - This unit only supports resolutions up to XGA. If the input signal is greater than XGA, the proje...
    19
4. Basic Operation
20
- Turning on the Power
  20
- Zoom/ Focusing
  20
  - Adjust the projection image size you need with the zoom ring on the lens. To focus the image, rot...
    20
    - Focus
      20
- Selecting Input Source
  20
  - When this unit is turned on, it will search for the input source you selected last time.
    20
  - You may select the input source directly on the remote control.
    20
- Selecting "ASPECT ratio"
  21
- Selecting Video Memory
  21
  - Press the CUSTOM button to recall a setting in the memory. Each time you press this button, the u...
    21
- Setting Menu
  21
- PIP function
  22
- Turning off the Power
  22
  - Press the OFF key on the remote control to turn off the unit
    22
  - After turning off the unit, the POWER LED will blink green and the fans will operate for 1 minute...
    22
5. Menu
23
- Using the Menu
  23
  - This unit is equipped with an on screen display (OSD) menu for making various adjustments and set...
    23
  - There are 3 different menu languages; page21 Language setting for more details.
    23
- PICTURE Setting Page
  23
- DISPLAY Setting Page
  24
- ENVIRONMENT Setting Page
  26
- INSTALL Setting Page
  26
6. Additional Information
27
- Warning Message
  27
- Replace the Lamp
  27
- Troubleshooting
  28
- Specifications
  29
- Optical Characteristics
  29
  - Projection System
    29
  - Single chip DLPTM system.
    29
  - DMD Chip
    29
  - 0.7" DMD, 848 x 600 pixels.
    29
  - Lens
    29
  - 1.3 times zoom ratio, f 31 to 44mm ± 5 mm, F 2.81 - 3.1
    29
  - Focus distance
    29
  - 1.5m -5m
    29
  - Projection Size
    29
  - 40 to 300 inches
    29
  - Lamp
    29
  - 150W VIP
    29
- Electrical Characteristics
  29
- Input/Output
  29
- General Characteristics
  29
  - Dimensions
    29
  - 400L x 347W x 116H (mm)
    29
  - Weight
    29
  - 14.8 lbs (6702 g)
    29
  - Power
    29
  - VAC 100 - 240 Full range switch (50/60Hz), 3 Wire Grounded
    29
  - Power Consumption
    29
  - Max 200 W
    29
  - Operating Temperature
    29
  - 5C to 35C
    29
  - Operating Humidity
    29
  - 20% - 85%
    29
  - Storage Temperature
    29
  - -20C- 60C
    29
  - Storage Humidity
    29
  - 20% - 90%
    29
  - Dimensions
    30
    - Unit: mm
      30
  - RS-232C Control Codes
    30
    - Code
      30
    - Function
      30
    - Code
      30
    - Function
      30
      - X01
        30
      - Power On
        30
      - X41
        30
      - Load memory 2 settings
        30
      - X02
        30
      - Power Off
        30
      - X42
        30
      - Load memory 3 settings
        30
      - X10
        30
      - Menu
        30
      - X46
        30
      - Load default of current source
        30
      - X11
        30
      - Enter
        30
      - X47
        30
      - Save memory 1 settings
        30
      - X12
        30
      - Exit
        30
      - X48
        30
      - Save memory 2 settings
        30
      - X13
        30
      - Up (arrow key)
        30
      - X49
        30
      - Save memory3 settings
        30
      - X14
        30
      - Down (arrow key)
        30
      - X55
        30
      - Switch active source
        30
      - X15
        30
      - Left (arrow key)
        30
      - X56
        30
      - Picture in picture display
        30
      - X16
        30
      - Right (arrow key)
        30
      - X57
        30
      - Picture by picture display
        30
      - X20
        30
      - Switch to Composite input
        30
      - X60
        30
      - Switch language - English
        30
      - X21
        30
      - Switch to S-Video input
        30
      - X61
        30
      - Switch language - French
        30
      - X22
        30
      - Switch to Component input
        30
      - X62
        30
      - Switch language - Spanish
        30
      - X23
        30
      - Switch to D-sub _PC input
        30
      - X85
        30
      - PC input - auto
        30
      - X24
        30
      - Switch to YPBPR input
        30
      - X90
        30
      - Image orientation - floor front
        30
      - X25
        30
      - Switch to BNC_PC input
        30
      - X91
        30
      - Image orientation - ceiling front
        30
      - X35
        30
      - Anamorphic
        30
      - X92
        30
      - Image orientation - floor rear
        30
      - X36
        30
      - Standard
        30
      - X93
        30
      - Image orientation - ceiling rear
        30
      - X37
        30
      - Letter box
        30
      - X94
        30
      - Back light on
        30
      - X38
        30
      - 4:3 full
        30
      - X95
        30
      - Back light off
        30
      - X40
        30
      - Load memory 1 settings
        30

Benutzerhandbuch

Größe:

2,26 MB
Seiten:

33
Language:

English

Handbuch öffnen