Benutzerhandbuch für Texas Instruments CDCM6208V2 Evaluation Module CDCM6208V2EVM

Inhaltsverzeichnis

• Features

  2
• General Description

  3
• CDCM6208 Evaluation Board

  3
• Signal Path and Control

  4
• Software-Selectable Option

  4
• Installing the EVM Control Software and USB Driver

  4
• CDCM6208 Control User Interface

  4
• Using the EVM Control Software

  5
• Primary and Secondary Reference Signal Type Selection

  5
• Input Divider For Primary Reference ®) Selection

  5
• Initial GUI Screen

  5
• Input MUX Selection

  6
• Input Divider (M) For the PLL Selection

  6
• Charge Pump Current Selection

  6
• Loop Filter (3rd Pole only) Selection

  6
• Feedback Divider Selection

  6
• Prescalar Dividers (PS_A and PS_B) Selection

  6
• VCO Frequency Selection

  6
• 6.10 Output MUX Selection

  6
• 6.11 Output Dividers

  6
• 6.12 Output Signal Type Selection

  7
• 6.13 Additional Features

  7
• Configuring the Board

  7
• Selecting the Interface Connection

  7
• Configuring the Power Supply

  7
• Configuring the Reference Inputs

  8
• Jumper Configuration For USB Power Supply

  8
• Configuring the Control Pins

  9
• Input Selection Jumper Settings

  9
• Mode Selection Jumper Settings

  9
• Selecting the Loop Filter

  10
• Configuring the Outputs

  10
• Using the MSP430 as a Bootloader

  10
• STATUS1 Functional Description

  10
• Device Control Pin Functions

  10
• EVM

  11
• Required Software and Hardware

  11
• Installing TI USB EEPROM Burner Software

  11
• Programming the CDCM6208 EVM’s TUSB3210

  11
• EVM SW4 Location

  12
• TUSB3210 EEPROM Burner Software

  13
• CDCM6208V2 EVM Board Schematic

  14
• CDCM6208V1/CDCM6208V2 EVM Control Modes

  14
• CDCM6208V1/CDCM6208V2 EVM Device Pins and Bypassing

  15
• CDCM6208V1/CDCM6208V2 EVM Reference Inputs

  16
• CDCM6208V1/CDCM6208V2 EVM Outputs 0 to 3

  17
• CDCM6208V1/CDCM6208V2 EVM Outputs 4 to 7

  18
• CDCM6208V1/CDCM6208V2 EVM Power Supplies

  19
• Onboard MSP430G2001

  20