Benutzerhandbuch für Tyan Computer B2735

Inhaltsverzeichnis

• Transport GX21

  1
• B2735

  1
• User’s Manual

  1
  • Preface

    2
    • Copyright

      2
    • Disclaimer

      2
    • Trademark recognition

      2
    • Federal Communications Commission

      3
    • Notice for Canada

      3
    • About this manual

      4
    • Safety information

      5
  • Table of Contents

    6
    • Chapter 1: Overview

      9
      • 1.1 About the Transport GX21 (B2735)

        9
      • 1.2 Product models

        9
      • Table 1: Transport GX21 (B2735) models

        9
        • 1.3 Features

          10
          • 1.3.1 B2735G21S2 specifications

            10
          • 1.3.2 B2735G21S4H specifications

            11
          • 1.3.3 B2735G21U4H specifications

            12
        • 1.4 Unpacking

          13
          • 1.4.1 Box contents

            13
          • 1.4.2 Accessories

            15
          • 1.4.3 Opening the box

            16
        • 1.5 About the product

          17
          • 1.5.1 System front view and front panel

            17
            • Power indicator

              17
            • USB ports

              17
            • Reset switch

              18
          • 1.5.2 System rear view

            18
            • Ventilation fan

              18
          • 1.5.3 System internal views

            19
    • Chapter 2: Setting up

      23
      • 2.1 Before you begin

        23
        • 2.1.1 Work area

          23
        • 2.1.2 Tools

          23
        • 2.1.3 Precautions

          24
      • 2.2 Installing motherboard components

        25
        • 2.2.1 Removing the chassis cover

          25
          • 1. Remove the six screws that secure the chassis cover.

            25
          • 2. Slide the cover in the direction of the arrow (A) and then lift the cover off (B).

            25
        • 2.2.2 Installing CPUs

          26
          • 1. Remove the chassis cover as described in section 2.2.1 Removing the chassis cover.

            26
          • 2. Locate the CPU sockets on the motherboard as shown below.

            26
          • 3. Lift the CPU locking lever as shown below.

            26
          • 4. Place the CPU in the CPU socket, ensuring that pin 1 is located as shown in the following illustration.

            27
          • pin 1

            27
            • 5. Press the CPU locking lever back down to secure the CPU in the socket.

              27
            • 6. Repeat steps three to five for the second CPU.

              27
            • 7. Apply thermal grease to the top of the CPUs and place the CPU heatsinks on the CPUs.

              27
            • 8. Tighten the four screws to secure the heatsinks in place as shown below.

              27
        • 2.2.3 Installing memory

          28
          • 1. Remove the chassis cover as described n section 2.2.1 Removing the chassis cover.

            28
          • 2. Locate the memory slots on the motherboard.

            28
          • 3. Press the memory slot locking levers in the direction of the arrows as shown below.

            28
          • 4. Align the memory module with the slot. The module will fit only one way in the slot. Ensure that indentations in the memory module line up with corresponding notches in the memory slot.

            28
          • 5. Insert the memory module into the slot as shown.

            29
          • 6. Ensure that the locking levers are firmly in place and that the memory module is properly seated in the slot.

            29
        • 2.2.4 Installing a PCI card

          29
          • 1. Remove the chassis cover as described in section 2.2.1 Removing the chassis cover.

            29
          • 2. Remove the PCI retention bar.

            29
          • 3. Remove the screw securing the PCI faceplate to the chassis.

            30
          • 4. Slide the PCI card clamp out as shown.

            30
          • 5. Slide the dust cover out.

            30
          • 6. Press the PCI card into place in the slot on the riser card. Ensure that the card is seated properly in the slot on the riser card and that the riser card is properly seated in its slot on the motherboard.

            31
          • 7. Reinsert the PCI card clamp.

            31
          • 8. Insert the screw to secure the PCI card to the chassis.

            32
      • 2.3 Installing a hard drive

        33
        • 2.3.1 Installing internal hard drives (B2735G21S2)

          33
          • 2.3.1.1 Installing an IDE hard drive

            33
          • 1. Remove the chassis cover as described in section 2.2.1 Removing the chassis cover.

            33
          • 2. If you are replacing an existing IDE hard drive, remove the power and data cables from it.

            33
          • 3. Remove the screw securing the HDD tray to the chassis.

            33
          • 4. Slide the HDD tray out of the chassis.

            34
          • 5. Place a new HDD in the tray and slide it to the front.

            34
          • 6. Secure the new disk drive in the tray with 4 screws.

            34
          • 7. Reinsert the HDD tray and secure it to the chassis with a screw.

            35
          • 8. Connect the IDE data cable and power cable to the HDD.

            35
            • 2.3.1.2 Installing an internal S-ATA hard drive

              35
          • 1. Remove the chassis cover as described in section 2.2.1 Removing the chassis cover.

            35
          • 2. If you are replacing an existing S-ATA hard drive, remove the power and data cables from it.

            35
          • 3. Remove the screw securing the HDD tray to the chassis.

            36
          • 4. Slide the HDD tray out of the chassis.

            36
          • 5. Place a new HDD in the tray and slide it to the front.

            36
          • 6. Secure the new disk drive in the tray with 4 screws.

            37
          • 7. Reinsert the HDD tray and secure it to the chassis with a screw.

            37
          • 8. Connect the S-ATA data cable and power cable to the HDD.

            37
        • 2.3.2 Installing an external S-ATA hard drive (B2735G21S4H)

          38
          • 1. Remove the chassis cover as described in section 2.2.1 Removing the chassis cover.

            38
          • 2. Press the drive bay locking latch in the direction of the arrow (1) and pull the locking lever open (2).

            38
          • 3. Slide the drive bay out.

            38
          • 4. Place a S-ATA drive in the drive bay.

            38
          • 5. Insert four screws to secure the new unit in the drive bay.

            39
          • 6. Reinsert the drive bay into the chassis. Ensure that the rear connector of the new drive is firmly seated in the backplane.

            39
        • 2.3.3 Installing an external SCSI hard drive (B2735G21U4H)

          39
          • 1. Remove the chassis cover as described in section 2.2.1 Removing the chassis cover.

            39
          • 2. Press the drive bay locking latch in the direction of the arrow (1) and pull the locking lever open (2).

            40
          • 3. Slide the drive bay out.

            40
          • 4. Insert a SCSI hard drive in the drive bay.

            40
          • 5. Insert four screws to secure the new unit in the drive bay.

            41
          • 6. Reinsert the drive bay into the chassis. Ensure that the rear connector of the new drive is firmly seated in the backplane.

            41
      • 2.4 Rack mounting

        42
        • 1. Screw the mounting ears to the Transport GX21 as shown using 4 screws from the supplied nuts, screws and washers kit.

          42
        • 2. Screw the sliding rail mounting brackets to the sliding rails as shown, using the short black screws from the supplied nuts, screws and washers kit.

          42
        • 3. Fully extend the sliding rails until they lock.

          43
        • 4. Screw each sliding rail to the side of the Transport GX21 as shown. You will need 3 short, silver colored screws from the supplied nuts, screws and washers kit, for each rail.

          43
        • 5. Return the sliding rails to their shortest position.

          43
        • 6. With the rails in their shortest position, adjust both front mounting brackets so that they are flush with the front of the unit.

          44
        • 7. Accurately measure the depth of your rack and adjust the rear brackets accordingly.

          44
        • 8. When all brackets are positioned correctly, tighten them.

          44
        • 9. Lift the unit into place in the rack and screw it into place as shown.

          45
    • Chapter 3: Replacing pre-installed components

      47
      • 3.1 Introduction

        47
      • 3.2 Replacing motherboard components

        47
        • 3.2.1 Disconnecting all motherboard cables

          47
          • 1. Disconnect ATX power cables.

            48
          • 2. Disconnect CD-ROM drive cable (A) (all models) and S-ATA hard drive cable (B) (B2735G21S2 only).

            48
          • 3. Disconnect front panel LED and USB connectors.

            49
        • 3.2.2 Replacing the motherboard

          50
          • 1. Remove the fan assembly bracket from the chassis.

            50
          • 2. Remove the PCI retention bar.

            50
          • 3. Remove the nine screws that secure the motherboard to the chassis.

            51
          • 4. Remove the motherboard from the chassis.

            51
      • 3.3 Replacing the CD-ROM drive

        51
        • 3.3.1 Replacing the slim CD-ROM drive (B2735G21S2)

          51
          • 1. Remove the chassis cover as described in section 2.2.1 Removing the chassis cover.

            51
          • 2. Locate the drive bay housing the FDD and slim CD-ROM drive and remove power and data cables from both.

            51
          • 3. Remove the two screws that secure the CD-ROM backplane to the CD-ROM drive.

            52
          • 4. Remove the four screws that secure the drive bay to the chassis and lift the drive bay free.

            52
          • 5. Slide the slim CD-ROM from the drive bay.

            52
        • 3.3.2 Replacing the CD-ROM drive (B2735G21U4H/B2735G21S4H)

          53
          • 1. Remove the chassis cover as described in section 2.2.1 Removing the chassis cover.

            53
          • 2. Remove the power and data cables from the CD-ROM drive.

            53
          • 3. Remove the two screws that secure the CD-ROM bracket to the chassis and lift it free.

            53
          • 4. Lift the CD-ROM drive from the chassis.

            53
          • 5. Remove the two screws that secure the CD-ROM adapter to the CD-ROM drive and remove it.

            54
      • 3.4 Replacing the floppy disk drive

        55
        • 3.4.1 Replacing the floppy disk drive (B2735G21S2)

          55
          • 1. Remove the chassis cover as described in section 2.2.1 Removing the chassis cover.

            55
          • 2. Locate the drive bay housing the slim CD-ROM drive and the FDD and remove power and data cables from both.

            55
          • 3. Remove the 4 screws that secure the drive bay to the chassis and lift the drive bay free.

            55
          • 4. Remove the four screws that secure the FDD in the drive bay and slide the unit out of the drive bay.

            55
        • 3.4.2 Replacing the floppy disk drive (B2735G21S4H/B2735G21U4H).

          56
          • 1. Remove the chassis cover as described in section 2.2.1 Removing the chassis cover

            56
          • 2. Remove the ribbon cable from the back of the slim floppy disk drive.

            56
          • 3. Remove the two screws that secure the floppy disk bracket to the chassis and lift it free.

            56
          • 4. Remove the floppy disk drive from the chassis.

            57
      • 3.5 Replacing the LED control board

        57
        • 1. Remove the two screws that secure the metal retaining plate to the chassis and lift it free.

          57
        • 2. Remove the front panel ribbon cable from the rear of the LED control panel.

          58
        • 3. Remove the two screws that secure the LED control panel to the chassis and lift the board free of the chassis.

          58
      • 3.6 Replacing the storage backplane

        58
        • 3.6.1 S-ATA backplane (B2735G21S4H)

          58
          • 3.6.1.1 Replacing the S-ATA backplane (B2735G21S4H)

            58
          • 1. Remove the chassis cover as described in section 2.2.1 Removing the chassis cover.

            59
          • 2. Remove the two screws that secure the metal retaining plate to the chassis and lift it free as shown.

            59
          • 3. Remove all cables connected to the S-ATA backplane, including front panel cable, power cables, and S-ATA data cables.

            59
          • 4. Remove the six screws that secure the S-ATA backplane bracket to the chassis.

            59
          • 5. Remove the S-ATA backplane bracket and backplanes free from the chassis.

            59
            • 3.6.1.2 S-ATA backplane features

              60
          • J3 serial ATA 7 pin connector

            60
        • 3.6.2 SCSI backplane (B2735G21U4H)

          61
          • 3.6.2.1 Replacing the SCSI backplane (B2735G21U4H)

            61
          • 1. Remove the chassis cover as described in section 2.2.1 Removing the chassis cover.

            61
          • 2. Remove the two screws that secure the metal retaining plate to the chassis and lift it free as shown.

            61
          • 3. Remove all cables connected to the SCSI backplane, including power cables, SCSI cable, and floppy disk drive cable.

            61
          • 4. Remove the 10 screws that secure the SCSI backplane to the chassis and lift the backplane free.

            62
            • 3.6.2.2 SCSI backplane features

              63
          • J5 80 pin SCA2

            63
      • 3.7 Replacing the power supply

        64
        • 1. Remove the chassis cover as described in section 2.2.1 Removing the chassis cover.

          64
        • 2. Remove the four screws that secure the fan assembly to the chassis and lift it free.

          64
        • 3. Disconnect power cables from the motherboard, HDDs, FDDs, CD-ROM drive and fans. See section 3.4.2 Disconnecting Cables for details on how to do this.

          64
        • 4. Remove the four screws that secure the power supply to the chassis and lift the unit free.

          64
      • 3.8 Replacing the cooling fans

        65
        • 1. Remove the chassis cover as described in section 2.2.1 Removing the chassis cover.

          65
        • 2. Remove the PCI retention bar

          65
        • 3. Remove the power cables for the 5 fans from the motherboard.

          65
        • 4. Remove the four screws that secure the fan bracket to the chassis.

          65
        • 5. Lift the fan bracket free of the unit

          65
        • 6. Remove the four screws securing each fan to the fan bracket to remove them from the fan bracket.

          66
        • 3.8.1 Cooling fan connections

          67
          • CPU1_FAN pin header

            67
          • Appendix

            69
            • 1. Turn on or reboot your system.

              69
            • 2. Press <Del> during POST (F4 on remote console) to start the BIOS setup utility

              69
  • BIOS setup utility

    70
  • Menu bar selections

    71
  • BIOS legend bar

    72
  • BIOS main menu

    73
  • BIOS advanced menu

    74
  • BIOS advanced menu

    75
  • CPU configuration submenu

    76
  • IDE configuration submenu

    77
  • IDE configuration submenu

    78
  • S-ATA Port/Primary IDE/Secondary IDE Configuration submenu

    79
  • Floppy configuration submenu

    80
  • Floppy configuration submenu

    81
  • Super I/O configuration submenu

    81
  • Super I/O configuration submenu

    82
  • ACPI settings submenu

    83
  • Advanced ACPI configuration submenu

    84
  • Advanced ACPI configuration

    85
  • DMI event logging submenu

    86
  • Remote access configuration

    87
  • USB configuration menu

    88
  • USB configuration submenu

    89
  • USB mass storage device configuration

    90
  • Hardware monitor submenu

    92
  • Hardware monitor submenu

    93
  • Advanced PCI/PnP Menu

    94
  • Advanced PCI/PnP Menu

    95
  • BIOS boot settings menu

    96
  • Boot settings configuration submenu

    97
  • Boot settings configuration submenu

    98
  • Boot device priority submenu

    99
  • Boot device priority submenu

    100
  • Hard disk drives submenu

    101
  • Removable drives submenu

    102
  • ATAPI CD-ROM drives submenu

    103
  • BIOS security menu

    104
  • BIOS security menu

    105
  • BIOS chipset settings

    106
  • Northbridge chipset configuration menu

    107
  • Southbridge chipset configuration menu

    108
  • Intel PCI-64 Hub 2 configuration submenu

    109
  • BIOS exit menu

    110
  • BIOS exit menu

    111
    • Controller card slot for TYAN M7902 Ultra 320 SCSI controller card (B2735G21U4H) or TYAN M8110 S- ATA RAID controller card (B2735G21S4H)

      112
    • Extendible SCSI channel connector for optional external SCSI devices.

      113
    • Connector to fit dedicated SO-DIMM socket on motherboard.

      114
      • 1. See the beep codes section in the motherboard manual

        115
      • 2. See the TYAN website for FAQs, bulletins, driver updates and other information: http://www.tyan.com

        115
      • 3. Only contact TYAN after first speaking with your dealer

        115
      • 4. Check the TYAN user group: alt.comp.periphs.mainboard.TYAN

        115