BenutzerhandbuchInhaltsverzeichnisChapter 1 – Introduction31.1 Welcome31.2 Product Overview41.3 Concepts and Terminology5 In the Hard position, gain reduction begins immediately at the set ratio.5 In the Med position, there is a slight fade-in to the set ratio.5 In the Soft position, there is an even more gradual fade-in to the set ratio.55 In Norm mode, there is no filter and the 2500 functions like a normal compressor.6 In Med mode, there is a slight attenuation of the low frequencies and a slight boost of the high frequencies, with a flat mid range affecting the signal into the RMS detector. This reduces pumping caused by low frequencies and increases the RMS detectors’ sensitivity to higher frequencies, affecting higher frequency signal peaks.6 In Loud mode, a gradual linear filter attenuates level by 15dB at 20hz and increases level by 15dB at 20khz. This decreases low frequency pumping while increasing higher frequency compression.6771.4 Components8Chapter 2 – Quickstart Guide9Chapter 3 – Controls and Interface103.1 Compressor Section103.2 Tone Section12Chapter 4 – The WaveSystem17Toolbar Functions17Preset Types17Loading Presets and Setups18Saving Presets and Setups18Deleting Presets19A/B Comparison and Copying19Toggle Buttons19Value Window Buttons20Sliders20Hover Box20Multiple Selection of Controls20TAB Functions20Appendix A – API 2500 Controls22Größe: 951 KBSeiten: 22Language: EnglishHandbuch öffnen