Benutzerhandbuch für Whirlpool 3395339

Inhaltsverzeichnis

• front cover

  1
• before you start

  2
• tools needed for installation

  3
• parts supplied for installation

  3
• parts owner must supply

  3
• gas supply requirements

  3
• electrical requirements

  4
• exhaust requirements

  5
• exhaust duct connection

  6
• recessed area and closet installations

  7
• to change to a 30- or 60- minute timing cam

  7
• now start

  8
  • 1 - check that each leg is approximately 1 inch from base

    8
  • 2 - wipe the interior of the drums thoroughly with a damp cloth

    8
  • 3 - install coin vaults and locks into meter case openings

    8
  • 4 - install control panel lock and key

    8
  • 5 - change the 45 minute timing cam if you would like

    8
  • 6 - open control panel & attach slide extension to the coin-slide mechanism

    8
  • 7 - secure coin-slide from inside the control panel

    8
  • 8 - repeat steps 6 and 7 for the other coin-slide

    8
  • 9 - attach wire guard around coin-slide mechanism

    8
  • 10 - remove the red caps from the gas pipes

    9
  • 11 - connect gas supply to each dryer

    9
  • 12 - open the shutoff valves in the gas supply lines

    9
  • 13 - use a brush and liquid detergent to test for gas leaks

    9
  • 14 - plug power supply cords into grounded outlets

    9
  • 15 - turn one dryer on to remove air from the gas supply line

    9
  • 16 - check levelness of dryers and adjust legs if needed

    9
  • 17 - to exhaust the dryers, see "Exhaust requirements"

    9
  • 18 - attach both ends of tether at rear of dryer to a secured 2 x 4

    9
  • 19 - check to make sure you have all your tools

    10
• if dryers do not operate properly

  11
• move dryers to a new location

  11
• if you need assistance

  11