Sony VMC-IL4435 Manual
Connecting and Setting Up the DTV
17
Connecting Two VCRs for Tape Editing
Connecting two VCRs together, then into the DTV, allows you to
switch between the two to be sure that what you are playing on one is
recording on the other.
switch between the two to be sure that what you are playing on one is
recording on the other.
1
Using an A/V cable, connect the playback VCR’s Audio and
Video OUT jacks to the recording VCR’s Audio and Video IN
jacks.
Video OUT jacks to the recording VCR’s Audio and Video IN
jacks.
2
Using an A/V cable, connect the recording VCR’s Audio and
Video OUT jacks to the DTV’s Audio and Video IN jacks.
Video OUT jacks to the DTV’s Audio and Video IN jacks.
3
If necessary, change the video input on your VCR. (For details,
see your VCR’s instruction guide.)
see your VCR’s instruction guide.)
To do tape editing
❑
❑
Set the DTV to the video input intended for playback by pressing
the
the
TV/VIDEO
button on the remote control.
AUDIO-R (red)
AUDIO-L (white)
VIDEO (yellow)
VCR (recording)
VCR (playback)
DTV
A/V cable
A/V cable
AUDIO-R (red)
AUDIO-L (white)
VIDEO (yellow)
✍
If the VCRs you are connecting have S VIDEO jacks, you can use S VIDEO
cables for improved picture quality (compared to a combination audio/video
cable). Because S VIDEO cables carry only the video signal, you will also need
audio cables for sound.
cables for improved picture quality (compared to a combination audio/video
cable). Because S VIDEO cables carry only the video signal, you will also need
audio cables for sound.