Accusplit 970-046 Leaflet

To record your distance and calories 

accurately, you will need to set your stride 

length and body weight. 

 Your stride 

length is the length of one of your steps, 

measured from “toe to toe.” To measure,  

walk 10 steps with your normal stride and 

measure the TOTAL DISTANCE from the  

toe of your starting step to the toe of your  

10

th

 step (see diagram below). Divide the 

TOTAL DISTANCE by 10. This is your stride 

length. Example: If you walk 22 feet, your 

stride length is 2.2 feet. 

Press the  

black MODE button until arrow at the top  

of display points to “DIST.” Press the gray 

SET button once to enter setting mode. 

Display will shift to show stride (for example, 

“F 1.95” means stride is set to 1.95 feet). 

Press the gray SET button to increase stride 

length. Press the yellow RESET button to 

decrease stride length. Press the black 

MODE button to exit setting mode.  

 Press the black MODE 

button until arrow at the top of the display 

points to “CAL.” Press the gray SET button 

once to enter setting mode. Display will shift  

to show weight in pounds. For example, “L 

165” means weight is set to 165 lbs. Press 

the gray SET button to increase weight 

setting. Press the yellow RESET button to 

decrease weight setting. Press black MODE 

button to exit weight setting mode.

 Press the black MODE 

button until the arrow on the top of display 

points to clock icon  . Press the gray SET 

button once to enter clock setting mode,  

clock readout will flash. Press the yellow 

RESET button to advance hours. Press the 

gray SET button to advance minutes. Press 

black MODE button to exit clock setting 

mode. 

Note: display will show “A” for AM and  

“P” for PM.

While gently holding the belt clip open, slide 

the pedometer onto your belt or the top edge 

of your pants or skirt. It should fit snugly and 

level, above one knee. 

 The pedometer should be as vertical as 

possible. Walkers with larger stomachs may 

find it helpful to wear the pedometer farther 

back on the body, toward one hip. The cover 

 

To avoid losing or dropping your pedometer, 

use the included leash and clip to fasten the 

pedometer securely to your clothing. 

Attach the pedometer 

to the leash by looping the leash around the 

pedometer belt clip. Next, clasp the waistband 

of your clothing with the attached clip. You can 

also use a safety pin to fasten the leash to 

your clothing, or loop the leash through your 

belt or belt loop. 

ACCUSPLIT, Inc.  •  6120 Stoneridge Mall Rd., Suite 210  •  Pleasanton, CA 94588 USA

800-965-2008  •  925-226-0888  •  FAX 925-463-0147  •  www.ACCUSPLIT.com  •  support@ACCUSPLIT.com

1. To filter out random movements, the  

  unit remains in standby mode until  

  5 continuous steps are registered.  

  Only then are the 5 steps calculated  

  in, and an Active indicator “▲”  

  appears on the upper left of display.

2. When regular walk/run movement  

  stops, after 2 seconds the timer  

  pauses and the unit switches to  

  standby status (Active indicator “▲”  

  disappears). 

Most people prefer to reset step, distance, 

and calorie counts daily. To reset: From 

STEP, DISTANCE, or CALORIE mode, 

press and hold the yellow RESET button 

for at least 2 seconds.

Congratulations on taking the first step to wellness with your 

purchase of an ACCUSPLIT pedometer. It’s easy to set up your 

new pedometer. Just follow the steps below, and start walking!

ACCUSPLIT®

       

EAGLE

™

 

•  STEP: STEP mode shows your  

  step count since last reset, up  

  to 1,000,000 steps. 
•  DIST: DISTANCE mode shows  

  distance walked or jogged since  

  last reset.
•  CAL: CALORIE mode shows  

  calories burned through step  

  activity since last reset.
• 

: CLOCK mode shows time of day.

• 

: ACTIVITY TIMER MODE  

  shows total activity time in minutes  

  and seconds since last reset. The  

  timer runs automatically whenever  

  steps are being recorded.
•  SCAN MODE: Rotates between  

  showing steps, distance, calories  

  and activity time.

ACCUSPLIT 

EAGLE

Yellow:

RESET

Gray:

SET

Black:

MODE

Current mode 

arrow indicator

(Badge holder  

not included)

970-046

Once you put on your pedometer with the 

cover closed, it will automatically begin to 

record your steps, distance, calories burned, 

and activity time. Repeatedly press the 

black MODE button to cycle through the 

pedometer modes: 

STEPS → DISTANCE → CALORIES → 

TIME OF DAY → ACTIVITY TIMER → 

SCAN → STEPS