Crestron electronic DM-CBL-NP Leaflet
Conductor DC Resistance: 28.6 ohms / 1000 ft maximum;
DC Resistance Unbalance: 3% maximum
DC Resistance Unbalance: 3% maximum
JJaacckkeett:: Color: Yellow;
Material: PVC;
Ripcord: yes;
Thickness: 0.018 inch;
Outer Diameter: 0.185 inch nominal
Material: PVC;
Ripcord: yes;
Thickness: 0.018 inch;
Outer Diameter: 0.185 inch nominal
‘DMNet’ Control & Power
C
Co
on
nssttrru
uccttiio
on
n:: (1) 22 AWG shielded pair (control) and (1) 18 AWG pair
(power) w/overall jacket
C
Co
on
nttrro
oll P
Paaiirr:: Colors: Gray/orange;
Conductors: 22 AWG x2 stranded copper;
Insulation: 0.025 inch thick foam Polyolefin;
Shield: Aluminum/Polyester (100% coverage) w/aluminum on the inside;
Drain: 24 AWG tinned stranded copper;
Capacitance: 12.5 pF / ft, nominal;
Impedance: 100 ohms, nominal
Insulation: 0.025 inch thick foam Polyolefin;
Shield: Aluminum/Polyester (100% coverage) w/aluminum on the inside;
Drain: 24 AWG tinned stranded copper;
Capacitance: 12.5 pF / ft, nominal;
Impedance: 100 ohms, nominal
P
Po
ow
weerr P
Paaiirr:: Colors: Red/black;
Conductors: 18 AWG x2 stranded copper;
Insulation: 0.01 inch thick PVC;
Shield: none
Insulation: 0.01 inch thick PVC;
Shield: none
JJaacckkeett:: Color: Gray;
Material: PVC;
Ripcord: yes;
Thickness: 0.0325 inch;
Outer Diameter: 0.25 inch nominal
Material: PVC;
Ripcord: yes;
Thickness: 0.0325 inch;
Outer Diameter: 0.25 inch nominal
Outer Jacket
C
Co
om
mp
po
ossiittee C
Co
on
nssttrru
uccttiio
on
n:: All wires contained in a Mylar wrap w/overall outer jacket
M
Maatteerriiaall:: PVC, flexible, flame retardant
R
R
Riip
pcco
orrd
d:: yes
O
Ou
utteerr D
Diiaam
meetteerr:: 0.58 inch (14.73 mm) nominal
C
Co
ollo
orr:: Blue w/red stripe
Rating
NEC Article 800; UL Subject 444, Type CM; CSA Type CMG
AVAILABLE ACCESSORIES
D
DM
M--C
CO
ON
NN
N
DigitalMedia
™
Cable Connector
* The maximum allowable cable length depends on multiple factors. One or more
DM Repeaters (Model DM-DR) may be required. Refer to the Crestron DigitalMedia
Design Guide, Doc. #4789 for complete wiring guidelines.
Design Guide, Doc. #4789 for complete wiring guidelines.
C
Crreessttrro
on
n D
DM
M--C
CB
BL
L--N
NP
P
Crestron DM-CBL-NP cable provides a high-performance, single-cable wiring
solution for DigitalMedia (DM) systems. Within a single jacket, DM-CBL-NP
contains one high-bandwidth/low-crosstalk shielded 4-twisted pair (STP) cable,
one CAT5e unshielded 4-twisted pair (UTP) cable, and one DMNet cable.
solution for DigitalMedia (DM) systems. Within a single jacket, DM-CBL-NP
contains one high-bandwidth/low-crosstalk shielded 4-twisted pair (STP) cable,
one CAT5e unshielded 4-twisted pair (UTP) cable, and one DMNet cable.
The STP “Video Data” cable, which connects to the ‘D’ port of a DigitalMedia
device, is of a specialized construction designed to allow the longest possible
cable lengths* for transporting high-definition digital video and audio. The Cat5e
“Data Management” cable, which connects to the ‘M’ port, carries high-speed
Ethernet and other data, plus 5V DC power. Finally, the DMNet cable carries
additional proprietary control signals and 24V DC power.
device, is of a specialized construction designed to allow the longest possible
cable lengths* for transporting high-definition digital video and audio. The Cat5e
“Data Management” cable, which connects to the ‘M’ port, carries high-speed
Ethernet and other data, plus 5V DC power. Finally, the DMNet cable carries
additional proprietary control signals and 24V DC power.
Wiring a DigitalMedia system using DM-CBL-NP is simple, requiring just one cable
to be run to each DM receiver (i.e. Room Controller) and transmitter location*.
Foot markers are printed on the outer jacket making it easy to determine the
exact length of each cable run when commissioning the installed system.
to be run to each DM receiver (i.e. Room Controller) and transmitter location*.
Foot markers are printed on the outer jacket making it easy to determine the
exact length of each cable run when commissioning the installed system.
Termination of a DM cable is accomplished using one standard RJ45 (not
provided) for ‘M’, one detachable terminal block (provided with each DM device)
for DMNet, and one Crestron DM-CONN shielded RJ45 (sold separately) for ‘D’.
The DM-CONN connector enables fast and reliable termination of the shielded
twisted-pair cable without requiring any special tools.
provided) for ‘M’, one detachable terminal block (provided with each DM device)
for DMNet, and one Crestron DM-CONN shielded RJ45 (sold separately) for ‘D’.
The DM-CONN connector enables fast and reliable termination of the shielded
twisted-pair cable without requiring any special tools.
AVAILABLE MODELS
D
DM
M--C
CB
BL
L--N
NP
P--S
SP
P5
50
00
0
DigitalMedia
™
Cable, non-plenum, 500 ft spool
SPECIFICATIONS
‘D’ Video Data
C
Co
on
nssttrru
uccttiio
on
n:: Four twisted pair, each pair isolated by an internal spline within an inner jacket,
shield, braid, and overall jacket
((4
4)) T
Tw
wiisstteed
d P
Paaiirrss:: Colors: Blue/white, orange/white, green/white, brown/white;
Conductors: 24 AWG x8 solid copper;
Insulation: 0.0055 inch thick HDPE;
Outer Diameter (per conductor): 1.028 ±0.02 mm;
Shield: Aluminum/Mylar tape w/aluminum on the outside;
Braid: Tin/copper (45% coverage);
Mutual Capacitance: 5600 pF / 100 m;
Capacitance Unbalance: 330 pF / 100 m;
Characteristic Impedance: 100 ohms ±15% (1-250 MHz)
Insulation: 0.0055 inch thick HDPE;
Outer Diameter (per conductor): 1.028 ±0.02 mm;
Shield: Aluminum/Mylar tape w/aluminum on the outside;
Braid: Tin/copper (45% coverage);
Mutual Capacitance: 5600 pF / 100 m;
Capacitance Unbalance: 330 pF / 100 m;
Characteristic Impedance: 100 ohms ±15% (1-250 MHz)
IIn
nn
neerr JJaacckkeett:: Color: Natural;
Material: PVC;
Thickness: 0.015 inch
Thickness: 0.015 inch
JJaacckkeett:: Color: Blue;
Material: PVC;
Thickness: 0.018 inch;
Outer Diameter: 7.62 ±0.38 mm
Material: PVC;
Thickness: 0.018 inch;
Outer Diameter: 7.62 ±0.38 mm
‘M’ Data Management (CAT5E)
((4
4)) T
Tw
wiisstteed
d P
Paaiirrss:: Colors: Blue/white, orange/white, green/white, brown/white;
Conductors: 24 AWG x8 solid copper;
Insulation: 0.0077 inch thick Polyethylene;
Shield: none;
Mutual Capacitance: 14 pF / ft nominal;
Capacitance Unbalance: 330 pF / 100 m maximum;
Characteristic Impedance: 100 ohms ±15% (0.772 to 100 MHz);
Velocity of Propagation: 70%;
Insulation: 0.0077 inch thick Polyethylene;
Shield: none;
Mutual Capacitance: 14 pF / ft nominal;
Capacitance Unbalance: 330 pF / 100 m maximum;
Characteristic Impedance: 100 ohms ±15% (0.772 to 100 MHz);
Velocity of Propagation: 70%;
www.crestron.com
|
800.237.2041
Crestron Electronics, Inc. 15 Volvo Drive
l
Rockleigh, NJ 07647
Tel: 800.237.2041 / 201.767.3400
l
Fax: 201.767.1903
DigitalMedia
™
Cable, non-plenum
Specifications subject to change without notice. Doc.4764 01/09
©2009 Crestron Electronics, Inc. All brand names, product names and trademarks are the property of their respective owners.