Stairmaster 4600 PT/CL User Manual
Page 7
4.
If you have a 4600/4400 CL, skip to step 9. If you have a 4600/4400/
4200 PT, connect the DC cable of the power supply to the connector
near the bottom of the left side cover (see Figure 4).
4200 PT, connect the DC cable of the power supply to the connector
near the bottom of the left side cover (see Figure 4).
Figure 4: DC Power Connector
5.
Place the power supply on the floor near an AC wall outlet. To reduce
the hazard of electrical shock, place the power supply in a location
away from the machine and away from exposure to perspiration. You
should not place your power supply on a carpet because it may over
heat.
the hazard of electrical shock, place the power supply in a location
away from the machine and away from exposure to perspiration. You
should not place your power supply on a carpet because it may over
heat.
INSTALLATION INSTRUCTIONS