Hasbro 98069 Leaflet
PARTS:
IBA BLASTER™* Front,
IBA BLASTER Back,
Runner Frame Parts,
1 Spring,
1 B-DABALL™*,
Target Pin, Decals.
IBA BLASTER Back,
Runner Frame Parts,
1 Spring,
1 B-DABALL™*,
Target Pin, Decals.
B-DAMAN launchers/game boards are intended to be used on the floor. Do not lean over the game
board when B-DAMAN launchers are in play. B-DABALLS™* may bounce up and hit eye or face.
WARNING: Do not use B-DAMAN™ launchers or B-DAMAN
game boards on tables or other elevated surfaces.
AGES 8+
98069/98047 Asst.
Assembly required. No tools needed.
• Before assembly and playing, please
read instructions. Please keep these
instructions for future reference.
• When removing parts from runner
frame, ask an adult to help you trim off
any excess plastic using scissors or
other suitable tool.
• The frame is numbered. Please follow
the numbers carefully and make sure
you are assembling the right parts.
•
Do not remove parts from runner
frame until directed to by the
instructions.
• Discard plastic bags immediately.
WING NINJA ARMOR ASSEMBLY:
IBA BLASTER
ready for battle!
Install spring.
3
BUILD IBA BLASTER:
5
4
2
1
™
WING NINJA
TM
*
B-DAMAN DATA:
#32
READY, SET, B-DAFIRE!™*
7
8
11
9
6
Helmet
Your
WING NINJA
is ready!
Label
10
Push tabs on helmet into slots on head.
13
Label
Label
12
Remove arms from body. Slots on Q-4 should face down, with waffle-print
area towards the rear. Press wedges on Q-1 and Q-2 into slots on IBA Body.
Flat side of the wedges should be facing the front of IBA Body.)
Back View
Be sure wings are firmly
pushed into Q-4.
Insert Q-3 and press
in until it clicks.
Label