Yamaha RX-A1030BL User Manual

CONFIGURATIONS

➤ Configuring various functions (Setup menu)

En

Configures the video output settings.

■

Enables/disables the video signal processing (resolution and aspect ratio).

• When “Video Mode” is set to “Direct”, the unit transmits video signals with the least circuitry in order to 

reduce video output delay.

• When “Video Mode” is set to “Processing” and the resolution is being converted, short messages are not 

displayed on the TV screen.

❑ Resolution

Selects a resolution to output HDMI video signals when “Video Mode” is set to 
“Processing”.

• If you need to select a resolution that is not supported by your TV, set “MONITOR CHECK” (p.121) in the 

“ADVANCED SETUP” menu to “SKIP” and try again. (Note that the output video may not be displayed on 
your TV normally.)

❑ Aspect

Selects an aspect ratio to output HDMI video signals when “Video Mode” is set to 
“Processing”.

• This setting functions only when 480i/576i or 480p/576p signals are converted into 720p, 1080i, 1080p, or 

2160p (4K) signals.

Direct (default)

Disables the video signal processing.

Processing

Enables the video signal processing.
Select a resolution and an aspect ratio in “Resolution” and “Aspect”.

Through

Does not convert the resolution.

Auto (default)

Selects a resolution automatically in accordance with TV resolution.

480p/576p, 720p, 
1080i, 1080p, 4K

Output video signals with a selected resolution.
(Only the resolutions supported by your TV are selectable.)

Through (default)

Does not convert the aspect ratio.

16:9 Normal

Outputs 4:3 video signals to a 16:9 TV with black bands on either side 
of the screen.