Yamaha RX-A1030BL User Manual
CONFIGURATIONS
➤ Configuring various functions (Setup menu)
En
112
Multi Zone
Configures the multi zone settings.
■
Main Zone Set
Configures the main zone setting.
❑ Zone Rename
Changes the zone name (for main zone) displayed on the front display or TV screen.
■
Procedure
1
Press ENTER to enter the name edit screen.
2
Use the cursor keys and ENTER to rename and select “ENTER” to confirm the entry.
• To clear the entry, select “CLEAR”.
3
Use the cursor keys to select “OK” and press ENTER.
• To restore the default setting, select “RESET”.
4
To exit from the menu, press ON SCREEN.
■
Zone2 Set
Configures the Zone2 settings.
❑ Volume
Enables/disables volume adjustments for Zone2 output.
If you have connected an external amplifier with volume control to the unit, disable
volume adjustments for Zone2.
volume adjustments for Zone2.
Settings
• This setting is not available when “Power Amp Assign” (p.103) is set to “7ch +1ZONE.
❑ Max Volume
Sets the Zone2 maximum volume to prevent excessive loudness.
Setting range
-30.0 dB to +15.0 dB (5.0 dB increments), +16.5 dB
Default
+16.5 dB
• This setting is available only when “Volume” is set to “Variable”.
❑ Initial Volume
Sets the Zone2 initial volume for when the unit is turned on.
Settings
• This setting is available only when “Volume” is set to “Variable”.
Fixed
Disables volume adjustments for Zone2 output.
Variable (default)
Enables volume adjustments for Zone2 output.
Off (default)
Sets the level at the volume level of the unit when it last entered standby
mode.
mode.
On
Sets at Mute or the specified volume level (-80 dB to +16.5 dB, 0.5 dB
increments).
(This setting works only when the initial volume is set lower than “Max Volume”.)
increments).
(This setting works only when the initial volume is set lower than “Max Volume”.)