Yamaha RX-A1030BL User Manual

CONFIGURATIONS

➤ Controlling external devices with the remote control

En

(China, Korea, U.K. and Europe models only)

The remote control of the unit can receive remote control signals 
from other infrared remote controls and learn the remote control 
operation. If you cannot find a remote control code for your 
playback device or if any key on the remote control does not work 
after you register the remote control code, use the learning function 
to assign a function to each key.

SOURCE blinks twice.

Perform each of the following steps within 1 minute. 
Otherwise, the setting will be canceled. If this happens, 
repeat from Step 1.

For playback device: press the input selection key 
(corresponding to the input jacks where the device is 
connected).

For TV: press TV z.

a On the unit, press one of the following keys to which you want to 

assign a function.

For playback device: SOURCE z, menu operations keys, 
external device operation keys

For TV: TV operation keys

b On the external device, press the key from which the operation is 

learned.

Once the operation is learned successfully, SOURCE blinks 
twice.

If it blinks six times, learning has failed. Repeat Step 5.

SOURCE blinks once.

Remote control of external device

5 to 10 cm (2 to 4”) apart

• If you press RECEIVER in step 2, you can assign functions of an external 

receiver to the menu operation keys, external device operation keys or 
numeric keys. However, it makes these keys to control the unit impossible. If 
you need to restore the remote control code for the unit, perform the following 
steps.

a Press CODE SET.
b Press RECEIVER.
c Use the numeric keys to enter “9992”.

z

z