Yamaha RX-A1030BL User Manual

PREPARATIONS

➤ Optimizing the speaker settings automatically (YPAO)

En

When “Multi Position” is set to “No”, follow the procedure below for 
measurement.

• Do not stand between the speakers and the YPAO microphone during the 

measurement process (about 3 minutes).

• Move to the corner of the room or leave the room.

The measurement will start in 10 seconds. Press ENTER 
again to start the measurement immediately.

• To cancel the measurement temporarily, press RETURN.

The following screen appears on the TV when the 
measurement finishes.

• If any error message (such as E-1) or warning message (such as W-1) 

appears, see “Error messages” (p.47) or “Warning messages” (p.48).

• To check the measurement results, select “Result”. For details, see 

“Checking the measurement results” (p.45).

To save the measurement results, use the cursor 
keys (e/r) to select “SAVE” and press ENTER.

The adjusted speaker settings are applied.

• To finish the measurement without saving the result, select “CANCEL”.

This completes optimization of the speaker settings.

• The YPAO microphone is sensitive to heat, so should not be placed anywhere 

where it could be exposed to direct sunlight or high temperatures (such as on 
top of AV equipment).