Razor E200s User Manual
12
TROUBLESHOOTING GUIDE
Need Help?
Need Help? V
Visit
isit our web site
our web site for updates and a list of authorized service centers
for updates and a list of authorized service centers at
at
www.razor.com
www.razor.com
or
or call
call ttoll-free at
oll-free at
866-467-2967
866-467-2967 Monday - Friday 8:00 AM -
Monday - Friday 8:00 AM - 55:00
:00 PM
PM Pacifi c
Pacifi c T
Time.
ime.
Sometimes the scooter
doesn’t run, but other
times it does
Charger gets warm
during use
Scooter does not stop
when applying the brake
Scooter makes loud
noises or grinding
sounds
Problem
Possible Cause
Solution
Brakes are not adjusted properly
Loose wires or connectors
Motor or electrical switch
damage
Normal response to charger use
Brakes are not adjusted properly
Chain is too dry
Brake rotor is dragging on brake
pads
Refer to adjusting the brakes instructions on page 4.
Check all wires around the motors and all connectors to make sure
they are tight.
Contact your local Razor authorized service center for diagnosis and
repair.
No action required. This is normal for some chargers and is no cause
for concern. If your charger does not get warm during use, it does not
mean that it is not working properly.
Refer to adjusting the brakes instructions on page 4.
Apply a lubricant such as 3 in 1
TM
or Tri-Flow
TM
to the chain.
Use your fi ngers to twist the caliper adjuster in either direction until
rotor is centered between pads.
E_Series_Manualv10.indd 13
3/10/06 2:11:11 PM