Philips 6900 User Manual

27

Philips Lifeline 6900/6800/AT Series User’s Manual

Setting Up a New Personal Help Button

If you receive a new Personal Help Button from Lifeline,  

you may need to set it up to work with your Lifeline 

Communicator. If so, please complete the following steps:

With the POWER switch on the back of your Communicator 

in the ON position, and the new Personal Help Button in 

hand, PRESS DOWN and HOLD DOWN the Reset Bar. 

The Communicator will announce: “Start Test.” 

While still holding down the Reset Bar with one hand, 

PRESS DOWN and HOLD DOWN the button on 

the Personal Help Button until your hear a long beep and 

the Communicator announces: “Personal Help Button, 

code XXX, programmed.”  This will indicate that the 

Communicator has learned the new button and is ready 

for use with it.  Then release the Reset Bar, and PRESS it 

DOWN briefly.  The Communicator will beep three times 

and then announce: “End Test.  There is one Personal Help 

If you have two Personal Help Buttons in the home and are 

only replacing one of them, you will still need to set up both 

buttons when you are setting up the new button. Be sure to 

set up both buttons during the same setup process. If you 

have successfully set up two buttons, the ending message will 

be: “End Test.  There are two Personal Help Buttons now