Impex MWM7150 User Manual

ASSEMBLY INSTRUCTION

Tools Required for Assembling the Machine: Two Adjustable Wrenches and
Allen Wrenches. NOTE: It is strongly recommended that two or more people
assemble this machine to avoid possible injury.

STEP 1 (See Diagram 1)

A.) Do not tighten the nuts and bolts until instructed to do so.
B.) Slide two Ø 2 ½” x 1” Rubber Bumpers (#33) onto the Guide Rods (#10). Insert

the two Guide Rods into the holes on the Rear Base Frame (#5). Secure each
Guide Rod with one M10 x 1” Allen Bolt (#47) and

∅

¾” Washer (#59) from the

bottom.

C.) Attach the rear of Main Frame (#1) to the Rear Base Frame. Secure them with two

M10 x 2 ¾” Carriage Bolts (#46), one U-shaped Bracket (#16), two Ø ¾” Washers
(#59), and two M10 Aircraft Nuts (#56).

D.) Attach the Front Post (#6) to the Main Frame. Secure them with two M10 x 2 ¾”

Carriage Bolts (#46), one 4 ¾” x 2” Bracket (#18), two Ø ¾” Washers (#59), and
two M10 Aircraft Nuts (#56).

E.) Attach the Seat Support (#17) onto the Main Frame. Secure them with two M10 x

2 ¾” Carriage Bolts (#46), one 4 ¾” x 2” Bracket (#18), two Ø ¾” Washers (#59),
and two M10 Aircraft Nuts (#56).

F.) Attach the Foot Plate (#14) onto the Front Post. Secure it with two M10 x 5/8”

Allen Bolts (#48) and two Ø ¾” Washers (#59).