Impex PL-105 User Manual

STEP 2 (See Diagram 2)  
A.) Insert the Axle (# 4) into the Pivot on the Main Frame (#1).  Attach the Left and Right 

Handlebars (#2) & (#32) onto the Axle from both sides.  Secure the Axle with two 

∅

 7/8” 

Washers (#7) and M8 Nylon Nuts (#8).  Close both ends with two Axle End Caps (#9).  

B.) Insert the Lower Handlebar (#3) into the Left Handlebar (#2).  Secure it with two M6 x 5/8” 

Allen Bolts (#6) and 

∅

½” Flat Washers (#5). Repeat same procedure to install the other side.