Impex WM-205 User Manual

ASSEMBLY INSTRUCTION

Tools required assembling the machine: Two Adjustable Wrenches.

NOTE: It is strongly recommended two or more people assembling this equipment to avoid
possible injury.

STEP 1

(See Diagram 1)

A.) Connect the Left & Right Upright Beams (#1 & #19) by a Cross Brace (#2) in the

mid-span. Secure them with two M10 x 2 ¾” Hex Bolts (#38), one Bracket (#16), two

∅

¾”

Washers (#44), and two M10 Aircraft Nuts (#47) on each end of the Cross Brace.

B.) Insert the Backrest Adjustment Bar (#8) through a selected hole on the Upright Beams to

obtain desired incline of Backrest.

C.) Insert Left & Right Bar Catches (#7) & (#6) into the selected holes on the Upright Beams

to obtain the desired height to hold the weight bar.

DIAGRAM 1