Impex EVE-725 User Manual

 
Tools required assembling the machine: Two Adjustable Wrenches and Allen 
Wrenches 

A.)  Connect the two Rear Upright Beams (#1) by a Cross Brace (#59) in the Mid-span. 
       Secure them with two M10 x 2 3/8” Hex Bolts (#2), four 

∅

 ¾” Washers (#3), one 

Bracket (#7), and two M10 Aircraft Nuts (#4) on each end of the Cross Brace. 

B.)  Insert the Backrest Adjustment Bar (#10) through a selected hole to obtain desired 

incline of Backrest.  

C.)  Insert two Bar Catches (#13) & (#14) into the selected hole on the Rear Upright Beams 

(#1) to obtain the desired height to hold the weight bar.