Bowflex 1000 User Manual

Assembly Manual

Assembly

Figure 14-1

Figure 14-2

Figure 13-1

Step 13: Attach the Drive Covers

Parts:

    •   TreadClimber® Base and Treadle assembly from Step 12
    •  (1) Left Plastic Drive Cover
    •  (1)  Right Plastic Drive Cover

Hardware:

• (6) #10 Phillips Head Screws

Tools:

• #2 Phillips Head Screwdriver (included)

13-1 Attach the left and right Plastic Drive Covers to the sides of the

base with (6) #10 Phillips Head Screws (3 per side) and the provided
#2 Phillips screwdriver (See Figures 13-1). Install upper screw first.

Note: Do not tighten hardware until all screws have been installed.

Step 14: Attach the Side Foot

Support Platforms

Parts:

    •   TreadClimber® Base and Treadle assembly from Step 13
    •  (1) Left Foot Support Platform
    •  (1)  Right Foot Support Platform

Hardware:

• (6) 1/4” x 1” Flat Head Screws

Tools:

• 5/16” Hex Key (included)

14-1 Attach the right and left side foot support platforms to each treadle

with (6) 1/4” x 1” Flat Head Screws (3 per side) (See Figures 14-1
and 14-2).