Roland CD-2e User Manual
100
Tuning Your Instrument (Tuner Function)
You can tune your instrument using the chromatic tuner function, which detects the name of
the note in semitone steps.
the note in semitone steps.
1
Set the [MIC SELECT] switch located on the side of the CD-2e to the “INT”
(internal mic) position.
(internal mic) position.
This allows you to tune by inputting the sound of your instrument via the internal mic.
fig.tuner-mic.eps
2
Press the [MENU] button to access the menu screen, and choose “Tuner/
Tone?”
Tone?”
fig.menu-tuner01-e.eps
Press the [MENU] button to access the menu screen.
Use the [
] [
] buttons to choose “Tuner/Tone?”
Press the [ENTER] button to confirm your choice.
3
Watch the tuner screen, and play a note on the instrument you want to
tune.
tune.
fig.menu-tuner02-e.eps
The name of the note closest to the pitch you played will
appear in the tuner screen. Tune your instrument so that
the desired note name appears.
appear in the tuner screen. Tune your instrument so that
the desired note name appears.
If the tuner does not respond, make sure that the [MIC]
knob’s level is raised.
knob’s level is raised.
4
Tune the instrument so that the left and right tuning guides are both
displayed.
displayed.
When your instrument is within ±50 cents of the correct pitch, a tuning guide will
appear in the screen. This indicates the distance between the displayed note name and
the pitch your instrument is actually producing.
appear in the screen. This indicates the distance between the displayed note name and
the pitch your instrument is actually producing.
fig.menu-tuner03-e.eps
Tune your instrument so that the left and right guides are
visible.
visible.
When only the right guide is displayed:
When only the left guide is displayed:
The pitch is above the displayed note
name (i.e., sharp).
name (i.e., sharp).
The pitch is below the displayed note
name (i.e., flat).
name (i.e., flat).
Note Name
Tuning guides
CD-2e_e.book 100 ページ ２００７年９月１０日 月曜日 午後８時５７分