Roland CD-2e User Manual
18
Panel Descriptions
(continued)
fig.unit03.eps
[SPEAKER] Switch
Specifies whether or not sound is to be produced
by the internal speakers.
by the internal speakers.
☞
LINE OUT Jack
Use this jack to output analog audio signals to an
external speaker system or electronic piano.
external speaker system or electronic piano.
☞
You can choose the audio signal that will be output
from the LINE OUT jack.
from the LINE OUT jack.
☞
AC Adaptor Connector
Connect the dedicated AC adaptor (included) here.
☞
[POWER] Switch
This turns the power on/off.
☞
Security Slot (
)
You can attach a commercially available security
lock here. For details, refer to the following website:
lock here. For details, refer to the following website:
http://www.kensington.com/
Battery Cover
☞
Battery Compartment
Install batteries here if you want to operate the
CD-2e on batteries.
CD-2e on batteries.
If you’re using the dedicated AC adaptor, it’s not
necessary to install batteries.
necessary to install batteries.
☞
Cord Hook
Use this cord hook to fasten the cord of the
dedicated AC adaptor (included) so that it doesn’t
become accidentally unplugged.
dedicated AC adaptor (included) so that it doesn’t
become accidentally unplugged.
☞
Rear Panel/ Bottom Panel
Switch position Explanation
ON
Sound will be heard from the
internal speakers.
internal speakers.
OFF
The internal speakers will be muted.
Switch position Explanation
ON
Power is on.
OFF
Power is switched off.
You must turn off the power before performing the
following operations.
following operations.
●
Switching from operation with the dedicated
AC adaptor to battery operation
AC adaptor to battery operation
●
Switching from battery operation to operation
with the dedicated AC adaptor
with the dedicated AC adaptor
Note
CD-2e_e.book 18 ページ ２００７年９月１０日 月曜日 午後８時５７分