Roland CD-2e User Manual
Recording Acoustic Instruments or Vocals
(continued)
41
Advanced Uses
Recording
Listening
Deleting
Creating a CD
Editing an SD
Appendices
Convenient
Functions
Information
/
Display
Checkin
g
/
Preparations
9
Press the [
(Stop)] button to stop recording.
fig.rec-intmic06-e.eps
The recorded song will be added to the end of the SD memory card or CD-R/RW disc.
If you want to listen to the song you recorded, press the [
If you want to listen to the song you recorded, press the [
(Play)] button
immediately after you stop recording.
Remote control
●
Sound will not be produced from the speakers while in recording-standby mode or while
recording. If you want to listen to the sound that’s being recorded, you’ll need to use
headphones. (Refer to Step 4 on Page 36.)
recording. If you want to listen to the sound that’s being recorded, you’ll need to use
headphones. (Refer to Step 4 on Page 36.)
●
If you hear acoustic feedback (a squealing sound) while using the mic, try changing the
direction of the mic, moving it away from the speakers, or lowering the volume.
direction of the mic, moving it away from the speakers, or lowering the volume.
●
When turning the [MIC] knob, you may hear a faint noise when the input level changes,
but this is not a malfunction.
but this is not a malfunction.
●
If you’ve finished recording a CD-R/RW disc and would like to play that disc on another
CD player, you’ll need to execute the “Finalize” operation. You can finalize the CD-R/RW
disc when ejecting it. For details, refer to “Making a CD-R/RW Disc for Playback on
Another CD Player (Finalize)” (Page 83).
CD player, you’ll need to execute the “Finalize” operation. You can finalize the CD-R/RW
disc when ejecting it. For details, refer to “Making a CD-R/RW Disc for Playback on
Another CD Player (Finalize)” (Page 83).
Important
You can set the sensitivity as appropriate for the external mic you’re using.
1
Press the [MENU] button to access the menu screen, and choose “EXT
MIC Sens.”
MIC Sens.”
fig.menu-micsens02.eps
Press the [MENU] button to access the menu screen.
Use the [
] [
] buttons to choose “EXT MIC
Sens.”
Press the [ENTER] button to confirm your choice.
2
Use the [+] [-] buttons to change the external mic sensitivity setting.
3
Press the [EXIT] button twice.
You’re returned to the audio source screen.
Selecting the external mic sensitivity
Value
Explanation
Low
Lowers the sensitivity of the external mic. If the movement of the level meter
does not decrease when you adjust the input level, select the “Low” setting.
does not decrease when you adjust the input level, select the “Low” setting.
High
(factory setting)
(factory setting)
Raises the sensitivity of the external mic. If the movement of the level meter
does not increase when you adjust the input level, select the “High” setting.
does not increase when you adjust the input level, select the “High” setting.
CD-2e_e.book 41 ページ ２００７年９月１０日 月曜日 午後８時５７分