Roland CD-2e User Manual
Recording Karaoke
(continued)
47
Advanced Uses
Recording
Listening
Deleting
Creating a CD
Editing an SD
Appendices
Convenient
Functions
Information
/
Display
Checkin
g
/
Preparations
5
Adjust the CD’s playback level and the mic’s input level.
Adjust the levels to obtain the desired volume balance between the CD and the mic.
* If sound from the speakers enters the mic, you won’t be able to adjust the level correctly. While
adjusting the level, either turn the [VOLUME] knob all the way down or set the [SPEAKER] switch
located on the side of the CD-2e to the “OFF” position, so no sound will be produced. Use
headphones if you want to monitor the sound that’s being recorded.
located on the side of the CD-2e to the “OFF” position, so no sound will be produced. Use
headphones if you want to monitor the sound that’s being recorded.
Press the [
(Play)] button to play back the CD.
Press the [
] or [
] button to access the SD/CD Level setting screen.
Use the [+] [-] buttons to adjust the CD’s playback level (“SD/CD Level”).
fig.player-level.eps
Turn the [MIC] knob to adjust the input level of the external mics.
As a guideline, adjust the level so that the level meter’s “-3 dB” indicator lights briefly when
the CD audio and mic audio are heard together.
the CD audio and mic audio are heard together.
Adjust the loudness of the sound you’re recording. Since you’re not using the line input, turn
the [LINE] knob all the way to the left (off).
the [LINE] knob all the way to the left (off).
When you’ve finished adjusting the level, press the [
(Stop)] button to stop the CD
playback.
fig.overdub-CD01.eps
6
Press the [MENU] button to access the menu screen, and choose
“Oberdub CD
“Oberdub CD
→
SD?”
Press the [MENU] button to access the menu screen.
Use the [
] [
] buttons to choose “Oberdub CD
→
SD?”
fig.menu-overdub-e.eps
Press the [ENTER] button to confirm your choice.
The CD-2e will be in recording-standby mode.
fig.overdub-CD02-e.eps
Value (units: dB)
Explanation
-6–0 (factory setting)–6
Decreasing this value will lower the playback level.
Increasing it will raise the playback level.
“0” is the CD’s original playback level.
Increasing it will raise the playback level.
“0” is the CD’s original playback level.
* If you don’t press the [+] [-] buttons for five seconds,
you’ll automatically be returned to the audio source
display.
display.
-3dB
Louder
Quieter
At this position
Blinking
CD song number
to record
Recording-destination
song number on the
SD memory card
CD-2e_e.book 47 ページ ２００７年９月１０日 月曜日 午後８時５７分